A new differential scanning calorimetry based approach for the characterization of peracid resin

Differential scanning calorimetry was used to trace the heat of decomposition of the peracid groups (ΔH_d) in the oxidized EVA-g-AA resin. From the correlation between ΔH_d and the oxidation capacity measured by iodometry, it was found that 35 ± 5 cal of energy evolved per miliequivalent of peracid group decomposed. The ΔH_d values are also useful in finding the optimum condition for oxidation of acid groups and can be used to investigate the distribution of active peracid groups across the matrix. The stability and the activation energy of decomposition of grafted type peracid resin were also studied, where the activation energy of decomposition was calculated to be 13.4 kcal/mol.     

Synthesis and thermotropic behaviour of liquid crystals containing tolane-based mesogenic units

Tolane-based liquid crystal materials with three different terminal groups: trifluoromethyltolanes, cyanotolanes, and nitrotolanes, and with different chain lengths of alkenyloxy groups, have been synthesized. The phase behaviour of these liquid crystal materials has been characterized by differential scanning calorimetry, optical polarized light microscopy and X-ray diffraction. The mesophase behaviour of the materials was shown to be significantly influenced by the polarity of the terminal groups. The trifluoromethyltolanes exhibit an enantiotropic smectic E mesophase and the cyanotolanes exhibit a monotropic nematic mesophase. The most polar among the three types of liquid crystal material; the nitrotolanes do not display any liquid crystalline phases, except for the homologue with an eleven methylene unit chain.     

Application of Liquid Crystalline NMR Solvents to a Mixture of Ketones

A series of dilute liquid crystalline solvents are used to study the effect of slight anisotropy caused by partial alignment on chemical shift and residual dipolar coupling (RDC) in small molecules. The residual dipolar couplings between protons in solutes are found to be almost independent of the local environment. It is also found that the chemical shift does not change over the concentration range observed. A linear relationship between residual dipolar coupling and liquid crystal concentration is observed at relatively low concentrations, but is severely violated at high concentrations.     

Immobilization of poly(ethylene oxide) on polyethylene using a plasma-induced graft copolymerization process

A radio-frequency glow discharge induced graft copolymerization process has prepared a PAAc-grafted PE film in this present study. Poly(ethylene oxide) (PEO) was then covalently immobilized onto PAAc-grafted PE film by a chemical coupling reaction. Carboxylic groups were introduced onto the surface of PE film by exposing the film to an Ar plasma, and the plasma-treated film was then next reacted with a 50% acrylic acid aqueous solution. These functional groups were reacted with bisamino PEO by a coupling agent CMC. ESCA, IR, and water contact angle studies were conducted for characterizing the surfaces of these films during the varied stages of the reaction. Increasing the molecular weight of the PEO attached to the PAAc-grafted PE resulted in an increased wettability of the films. © 1993 John Wiley & Sons, Inc.     

Mesogenic and optical properties of α,α′‐bis(4‐alkoxyphenylethynyl)oligothiophenes

Liquid crystalline α,α′‐bis(4‐alkoxyphenylethynyl)oligothiophenes (bi‐ and ter‐thiophene) have been synthesized and their mesogenic behaviour and optical properties investigated. They all exhibited a nematic mesophase, and compounds with long alkoxy chains also showed lamellar phases. Increasing the number of thiophene units increased both the transition temperatures and the mesophase ranges. As for their optical properties, incorporating more thiophene units results in red‐shifted absorption and emission spectra, slightly enhanced quantum efficiency, and a larger Stoke's shift. Most importantly, in terms of the absorption and emission maxima, the incorporation of one 4‐alkoxyphenylethynyl moiety was found to be equivalent to adding one thiophene ring.     

Distinguishing authentic and counterfeit banknotes by surface chemical composition determined using electrospray laser desorption ionization mass spectrometry

Electrospray laser desorption ionization mass spectrometry (ELDI/MS) was used to rapidly distinguish authentic banknotes from counterfeits of the US dollar and the New Taiwan dollar. The banknotes' surfaces were irradiated with a pulsed ultraviolet laser, after which the desorbed ink compounds entered an electrospray plume and formed ions via interactions with charged solvent species. Authentic banknotes were found to differ from their counterfeit equivalents in their surface chemical compositions. The detected chemical compounds included various polymers, plasticizers and inks; these results were comparable with those obtained using solvent extraction followed by electrospray ionization mass spectrometry analysis. Because of the high spatial resolution of the laser beam, ELDI/MS analysis resulted in minimal damage to the banknotes. Copyright © 2013 John Wiley & Sons, Ltd.     

Euphorbiane: A Novel Triterpenoid with an Unprecedented Skeleton from Euphorbia tirucalli

Euphorbiane ( 1 ), a novel triterpenoid exhibiting a unique skeleton, together with seven known compounds were isolated from the 95% EtOH extract of the fresh stems of Euphorbia tirucalli. The structure of 1 and relative stereochemistry were elucidated by extensive NMR and a single‐crystal X‐ray crystallographic analysis.     

Enhanced Surface Interactions Enable Fast Li+ Conduction in Oxide/Polymer Composite Electrolyte

Li⁺‐conducting oxides are considered better ceramic fillers than Li⁺‐insulating oxides for improving Li⁺ conductivity in composite polymer electrolytes owing to their ability to conduct Li⁺ through the ceramic oxide as well as across the oxide/polymer interface. Here we use two Li⁺‐insulating oxides (fluorite Gd_0.1Ce_0.9O_1.95 and perovskite La_0.8Sr_0.2Ga_0.8Mg_0.2O_2.55) with a high concentration of oxygen vacancies to demonstrate two oxide/poly(ethylene oxide) (PEO)‐based polymer composite electrolytes, each with a Li⁺ conductivity above 10^?4 S cm^?1 at 30 °C. Li solid‐state NMR results show an increase in Li⁺ ions (>10 %) occupying the more mobile A2 environment in the composite electrolytes. This increase in A2‐site occupancy originates from the strong interaction between the O^2? of Li‐salt anion and the surface oxygen vacancies of each oxide and contributes to the more facile Li⁺ transport. All‐solid‐state Li‐metal cells with these composite electrolytes demonstrate a small interfacial resistance with good cycling performance at 35 °C.     

In Vivo Imaging of the Tumor‐Associated Enzyme NCEH1 with a Covalent PET Probe

Herein, we report the development of an ¹⁸F‐labeled, activity‐based small‐molecule probe targeting the cancer‐associated serine hydrolase NCEH1. We undertook a focused medicinal chemistry campaign to simultaneously preserve potent and specific NCEH1 labeling in live cells and animals, while permitting facile ¹⁸F radionuclide incorporation required for PET imaging. The resulting molecule, [¹⁸F]JW199, labels active NCEH1 in live cells at nanomolar concentrations and greater than 1000‐fold selectivity relative to other serine hydrolases. [¹⁸F]JW199 displays rapid, NCEH1‐dependent accumulation in mouse tissues. Finally, we demonstrate that [¹⁸F]JW199 labels aggressive cancer tumor cells in vivo, which uncovered localized NCEH1 activity at the leading edge of triple‐negative breast cancer tumors, suggesting roles for NCEH1 in tumor aggressiveness and metastasis.