Spectrophotometric and AAS determination of trace amounts of cobalt after preconcentration by using alpha-benzilmonoxime-microcrystalline naphthalene.

The formed cobalt-a-benzilmonoxime complex was adsorbed onto microcrystalline naphthalene. Then it was determined by zero and first derivative spectrophotometry and by atomic absorption spectrophotometry (AAS) after dissolving into chloroform and methylisobutylketone (MIBK), respectively. Under optimum conditions, cobalt in the range of 1.0 - 20.0, 0.4 - 30.0 and 2.5 - 50.0 microg could be determined by spectrophotometry, first derivative spectrophotometry and AAS method, respectively. By the method, a preconcentration factor equal to approximately 30 for cobalt was obtained. The effect of diverse ions on the determination of 5.0 microg cobalt was also studied. The method was successfully applied to some pharmaceuticals and synthetic alloy samples.     

Simultaneous determination of cobalt, nickel and palladium in micellar media using partial least square regression and direct orthogonal signal correction

A simple, novel and sensitive spectrophotometric method was described for the simultaneous determination of cobalt, nickel and palladium. The method is based on the complex formation of Co, Ni and Pd with 1-(2-pyridylazo)-2-naphtol (PAN) in Tween-80 micellar media. All factors affecting on the sensitivity were optimized and the linear dynamic range for determination of Co, Ni and Pd was found. The experimental calibration matrix was designed by measuring the absorbance over the range of 520-700 nm for 21 samples of 0.10-1.0, 0.050-0.50 and 0.050-4.0 microg ml(-1) of Co, Ni and Pd, respectively. The partial least square (PLS) modeling based on singular value decomposition (SVD) was used for the multivariate calibration of the spectrophotometric data. The direct orthogonal signal correction was used for pre-processing of data matrices and the prediction results of model, with and without using direct orthogonal signal correction, were statistically compared. The effects of various anions and cations on selectivity of the method were investigated. The proposed method was successfully applied to the determination of Co, Ni and Pd in water and alloy samples.     

Ultra-trace analysis of nitrite in food samples by flow injection with spectrophotometric detection

A flow injection system with spectrophotometric detection is proposed for the determination of low levels of nitrite based on its catalytic effect on the oxidation of gallocyanine by bromate in acidic media. Various analytical parameters such as acidity, reagent concentration, flow rate, sample size, time, temperature, and interfering species were studied. The calibration graph was linear for 0.020–0.500 μg/mL of nitrite. The method is successfully applied to food samples. Up to 30 ± 5 samples can be analyzed per hour. Received: 8 April 1998 / Revised: 3 June 1998 / Accepted: 31 July 1998     

Kinetic spectrophotometric method for the determination of trace amounts of oxalate by an activation effect.

A new, simple and inexpensive kinetic catalytic spectrophotometric method for the determination of oxalate is described. The method is based on an activation effect of oxalate on a catalytic effect of iron(II) on the oxidation of iodide by bromate. The reaction is monitored by measuring the absorbance of triiodide ion at lambda max = 352 nm. A calibration graph was obtained from 0.10 - 7.0 microg cm(-3) of oxalate with a detection limit of 0.080 microg cm(-3). The standard deviations for ten replicate determinations of 0.50, 1.0 and 5.0 microg cm(-3) of oxalate were 4.0, 2.6 and 1.8%, respectively. The applicability of the method was demonstrated by the determination of oxalate ion in real samples.     

Ultra-trace analysis of nitrite in food samples by flow injection with spectrophotometric detection

A flow injection system with spectrophotometric detection is proposed for the determination of low levels of nitrite based on its catalytic effect on the oxidation of gallocyanine by bromate in acidic media. Various analytical parameters such as acidity, reagent concentration, flow rate, sample size, time, temperature, and interfering species were studied. The calibration graph was linear for 0.020–0.500 μg/mL of nitrite. The method is successfully applied to food samples. Up to 30 ± 5 samples can be analyzed per hour. Received: 8 April 1998 / Revised: 3 June 1998 / Accepted: 31 July 1998     

The inverse maximum dynamic flow problem

We consider the inverse maximum dynamic flow (IMDF) problem. IMDF problem can be described as: how to change the capacity vector of a dynamic network as little as possible so that a given feasible dynamic flow becomes a maximum dynamic flow. After discussing some characteristics of this problem, it is converted to a constrained minimum dynamic cut problem. Then an efficient algorithm which uses two maximum dynamic flow algorithms is proposed to solve the problem.     

Methylthiouracil‐modified Carbon Paste Electrode as a New Voltammetric Sensor Based on a 1,4‐Michael Addition Reaction for Detection of Dopamine

A sensitive dopamine sensor was constructed based on the modified carbon paste electrode with methylthiouracil as a nucleophile in the 1,4‐Michael addition reaction. An ECE mechanism was suggested for dopamine oxidation at the modified electrode. Design of experiments was used in the optimization of variables. Under the optimum conditions, calibration graph was linear in the range of 0.20–15.0 µM with a detection limit of 73 nM. The relative standard deviations (n=5) for 0.50 µM of dopamine was 3.83 %. The selectivity of the sensor was also studied. The developed sensor was applied for analysis of pharmaceutical and biological samples.     

Development of coupled ultrasound‐assisted and reversed‐phase dispersive liquid–liquid microextraction before high‐performance liquid chromatography for the sensitive determination of vitamin A and vitamin E in oil samples

A new approach based on the ultrasound‐assisted reversed‐phase dispersive liquid–liquid microextraction technique is developed for the extraction and determination of vitamin A and vitamin E from oil matrices before high‐performance liquid chromatography analysis. A methodology based on the full factorial design is carried out to choose the significant parameters. Then the significant factors affecting the extraction efficiency including pH, volume of extraction solvent, and volume of disperser solvent are optimized using a Box–Behnken design. After analyzing the results obtained, the optimum conditions were: pH 4.5, 80–20 μL of the ethanol/water solvent mixture as extraction solvent, 110 μL of 1,4‐dioxane as the disperser solvent, and a sonication time of 10 min. For validation of the developed method, the linear dynamic range, repeatability, limit of detection, and recoveries were obtained under the optimum conditions. The detection limits of the method were 1.6 and 2.3 ng/mL for vitamin A and vitamin E, respectively. The extraction recovery percentages for the studied drugs were above 91%, with acceptable relative standard deviation. The proposed methodology was successfully applied for the determination of the vitamins in different oil samples.     

Determination of trace amounts of thiocyanate by a new kinetic procedure based on an induction period

A new, simple and sensitive kinetic spectrophotometric method with no need for removing of interfering substances is proposed for the determination of thiocyanate ion in biological and water samples. The procedure is based on the inhibiting effect of thiocyanate on the sodium periodate-potassium bromide-meta cresol purple (MCP) system in acidic media. The induction period of the reaction is proportional to the SCN- concentration. The decolorization of meta cresol purple by the reaction products was used to monitor the reaction spectrophotometrically at 525 nm. Under optimum conditions, thiocyanate can be determined in the range of 0.02-0.8 microg ml(-1) with a 3sigma detection limit of 5 ng ml(-1). The relative standard deviations for 10 replicate determinations of 0.060, 0.10 and 0.50 microg ml(-1) thiocyanate are 3.7, 2.4 and 1.0%, respectively. This method has been successfully used to the determination of thiocyanate content in smokers and non-smokers saliva and spiked water sample.     

Development of a Simple and Inexpensive Optical Absorption One‐Shot Sensor Membrane for Detection and Determination of Cyanide Ions in Water Samples

A new one‐shot optical cyanide ion sensor is proposed for determination of cyanide ions. The sensor was constructed by immobilizing crystal violet (CV) on triacetylcellulose membrane. The sensing mechanism involves reaction between cyanide ions and the immobilized CV at pH = 5.4, which results in a decrease in absorbance of the membrane at 600 nm. The sensor shows sufficient repeatability, reproducibility, operational lifetime of 3 weeks, and a response of less then 10 min under the optimum conditions and response time of 8 min. Cyanide can be determined in the concentration range of 50.0‐800 μg mL^‐1 with a detection limit of 5.0 μg mL^‐1. Most ions do not interfere with the determination of cyanide ions. The proposed sensor was successfully applied to the determination of cyanide in spiked water samples.