Validation of a thermal decomposition mechanism of formaldehyde by detection of CH2O and HCO behind shock waves

The thermal decomposition of formaldehyde was investigated behind shock waves at temperatures between 1675 and 2080 K. Quantitative concentration time profiles of formaldehyde and formyl radicals were measured by means of sensitive 174 nm VUV absorption (CH₂O) and 614 nm FM spectroscopy (HCO), respectively. The rate constant of the radical forming channel (1a), CH₂O + M → HCO + H + M, of the unimolecular decomposition of formaldehyde in argon was measured at temperatures from 1675 to 2080 K at an average total pressure of 1.2 bar, k_1a = 5.0 × 10¹⁵ exp(‐308 kJ mol^?1/RT) cm³ mol^?1 s^?1. The pressure dependence, the rate of the competing molecular channel (1b), CH₂O + M → H₂ + CO + M, and the branching fraction β = k_1a/(kA_1a + k_1b) was characterized by a two‐channel RRKM/master equation analysis. With channel (1b) being the main channel at low pressures, the branching fraction was found to switch from channel (1b) to channel (1a) at moderate pressures of 1–50 bar. Taking advantage of the results of two preceding publications, a decomposition mechanism with six reactions is recommended, which was validated by measured formyl radical profiles and numerous literature experimental observations. The mechanism is capable of a reliable prediction of almost all formaldehyde pyrolysis literature data, including CH₂O, CO, and H atom measurements at temperatures of 1200–3200 K, with mixtures of 7 ppm to 5% formaldehyde, and pressures up to 15 bar. Some evidence was found for a self‐reaction of two CH₂O molecules. At high initial CH₂O mole fractions the reverse of reaction (6), CH₂OH + HCO ? CH₂O + CH₂O becomes noticeable. The rate of the forward reaction was roughly measured to be k₆ = 1.5 × 10¹³ cm³ mol^?1 s^?1. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 157–169 2004     

Comparison of side-on and end-on coordination of E2 ligands in complexes [W(CO)5E2] (E=N,P, As,Sb, Bi,Si-, Ge-, Sn-, Pb-)

Complexes of W(CO)(5) with neutral diatomic pnictogen ligands N(2), P(2), As(2), Sb(2), and Bi(2) and anionic Group 14 ligands Si(2) (2-), Ge(2) (2-), Sn(2) (2-), and Pb(2) (2-) coordinated in both side-on and end-on fashion have been optimized by using density functional theory at the BP86 level with valence sets of TZP quality. The calculated bond energies have been used to compare the preferential binding modes of each respective ligand. The results were interpreted by analyzing the nature of the interaction between the ligands and the metal fragment using an energy partitioning method. This yields quantitative information regarding the strength of covalent and electrostatic interactions between the metal and ligand, as well as the contributions by orbitals of different symmetry to the covalent bonding. Results show that all the ligands studied bind preferentially in a side-on coordination mode, with the exception of N(2), which prefers to coordinate in an end-on mode. The preference of the heavier homologues P(2)-Bi(2) for binding in a side-on mode over the end-on mode in the neutral complexes [(CO)(5)WE(2)] comes mainly from the much stronger electrostatic attraction in the former species. The energy difference between the side-on and end-on isomers of the negatively charged complexes with the ligands Si(2) (2-), Ge(2) (2-), Sn(2) (2-), and Pb(2) (2-) is much less and it cannot be ascribed to a particular bonding component.     

Thermodynamics of the decomposition processes of donor-acceptor complexes MX3 x en x MX3 and MX3 x en.

The structural and thermodynamic properties of the donor-acceptor (DA) complexes of Group 13 metal halides (MX3) with ethylenediamine and their decomposition products have been studied theoretically at the B3LYP/LANL2DZ(d,p) level of theory. Gas-phase dissociation into various components and HX elimination reactions are considered. Both processes are endothermic but favored by entropy. Complexes of 2:1 composition are predicted to be stable in the gas phase up to 640-1000 K. It is found that complexation with the second acceptor molecule lowers the HX elimination enthalpy; in turn, HX elimination increases DA bonding with a second MX3 molecule. Exceptionally high values of the dissociation enthalpies (310-390 kJ mol(-1)) and HX elimination reactions (360-420 kJ mol(-1)) of the amido compounds MX2NHC2H4NH2 and MX2NHC2H4NHMX2 make them important intermediates in the decomposition processes. Dissociation reactions of the complexes are more favorable than HX elimination reactions; however, the subsequent oligomerization and cyclization processes of coordinationally unsaturated amido and imido compounds may facilitate HX elimination. Since HI elimination reactions are predicted to be the least endothermic, and aluminum-containing compounds have the strongest M-N dissociation enthalpies, it is expected that compounds based on aluminum iodide are promising objects for experimental studies.     

Assignment of Relative Configuration to Acyclic Compounds Based on (13)C NMR Shifts. A Density Functional and Molecular Mechanics Study

1,3-Dimethylated hydrocarbon segments occur frequently as structural elements in polyketide natural products. The (13)C NMR chemical shifts of a series of model compounds containing such segments can be well reproduced by a combination of molecular mechanics and SOS-DFPT/IGLO calculations. (13)C NMR chemical shifts are calculated on MM3 geometries and are Boltzmann weighted according to the MM3 energies. On the basis of the resulting thermally averaged chemical shifts, all diastereomers of the model compounds can be unequivocally distinguished. Significant differences in chemical shifts occur at methyl groups and methylene groups that are adjacent to a single stereogenic center. The method is applied to predict the relative configuration of two stereocenters in the side chains of two natural products, sambutoxin and the bradykinin inhibitor L-755,897.     

Substituted cyclononatetraenes and nonafulvenes

Reaction of $\text{cis}$,$\text{cis}$,$\text{cis}$,$\text{cis}$-[9]annulene anion ($\text{1}$) with electrophiles ($\text{2a}$-$\text{d}$) leads to substituted $\text{cis}$,$\text{cis}$,$\text{cis}$,$\text{cis}$-1,3,5,7-cyclononatetraenes ($\text{3a}$-$\text{d}$) which are precursors for the preparation of 10- and 10,10′-donor-substituted nonafulvenes (e.g. $\text{7b′}$$\text{e′}$). The influence of solvent and temperature on the ¹H-nmr spectra of the nonafulvenes $\text{7b′}$-$\text{h′}$ has been investigated.     

Why are olefins oxidized by RuO4 under cleavage of the carbon-carbon bond whereas oxidation by OsO4 yields cis-diols?

Quantum chemical calculations using gradient-corrected (B3LYP) density functional theory have been carried out to investigate the mechanism of the oxidative cleavage of alkenes by ruthenium tetraoxide. The initial reaction of the tetraoxide with the olefin occurs via a [3+2] cycloaddition as in the case of osmium tetraoxide. The results clearly show that the bond cleavage does not take place at the primary adduct, but much later in the reaction path. After the formation of the ruthenium(VI)dioxo-2,5-dioxolane, the reaction proceeds with the addition of a second olefin to yield ruthenium(IV)-bis(2,5-dioxolane), which in turn becomes oxidized first to rutheniumoxo(VI)-bis(2,5-dioxolane) 6(Ru) and then to ruthenium(VIII)-dioxo-bis(2,5-dioxolane) 7(Ru). Only in complexes containing the metal center in the formal oxidation state +VIII are low activation barriers for C-C bond cleavage and exothermic formation of carbonyl compounds as products calculated. The lowest activation barrier, DeltaH(++) = 2.5 kcal/mol, is calculated for the C-C bond breaking reaction of 7(Ru) which is predicted as the pivotal intermediate of the oxidation reaction. The calculations of the oxidation reaction with OsO(4) show that those reactions where the oxidation state of the metal increases have larger activation barriers for M = Ru than for M = Os, while reactions which reduce the oxidation state have a lower activation barrier for ruthenium compounds. Also, reactions which increase the oxidation state of the metal are in the case of M = Os more exothermic than for M = Ru. In this work, all important points of the potential energy surface (PES) are reported, and the complete catalytic cycle for the oxidative cleavage of olefins by ruthenium tetraoxide is presented.