Characterization of surface deformation around Vickers indentations in InGaAsP epilayers on InP substrate

The deformation surrounding Vickers indentations on InGaAsP/InP epilayers have been studied in detail. The surface topography was characterized by using atomic force microscopy (AFM). The material pile-up and sink-in regions around the indentation impression was observed for the quaternary InGaAsP/InP epilayers. The sectional analysis mode of the AFM shows the depth profile at the indented region. Microindentation studies were carried out for different atomic fraction of the quaternary InGaAsP/InP compound semiconductor alloys. The microhardness values of InGaAsP/InP epilayers were found to be in the range of 5.08 and 5.73 GPa. These results show that the hardness value of the quaternary alloy drastically increases as the composition of As was increased by 0.01 atomic fraction and when the phosphorous concentration decreases from 0.4 to 0.38. The reason may be that the increase in As concentration hardens the lattice when phosphorous concentration was less and hardness decreases when phosphorous was increased.     

Critical phenomena in FINEMET alloy

The Fe_73.5Cu₁Nb₃Si_13.5B₉ FINEMET alloy has been prepared by the rapid solidification technique. The critical behaviour of this alloy in the amorphous as well as in its nanocrystalline states has been studied near their respective Curie temperatures. From the values of the critical exponents one can conclude that the alloy behaves like a 3D Heisenberg ferromagnet in the amorphous and nanocrystalline states. But there exists a slight increase in the value of β for the alloy annealed at 823 K (the nanocrystalline state) as observed in most of the amorphous alloys.     

On the departure process of a leaky bucket system with long-range dependent input traffic

Due to the strong experimental evidence that the traffic to be offered to future broadband networks will display long-range dependence, it is important to study the possible implications that such traffic may have for the design and performance of these networks. In particular, an important question is whether the offered traffic preserves its long-range dependent nature after passing through a policing mechanism at the interface of the network. One of the proposed solutions for flow control in the context of the emerging ATM standard is the so-called leaky bucket scheme. In this paper we consider a leaky bucket system with long-range dependent input traffic. We adopt the following popular model for long-range dependent traffic: Time is discrete. At each unit time a random number of sessions is initiated, having the distribution of a Poisson random variable with mean λ. Each of these sessions has a random duration τ, where the integer random variable τ has finite mean, infinite variance, and a regularly varying tail, i.e., P(τ >К) ~ К^-Lα L(К), where 1 < α < 2 L(·) is a slowly varying function. Once a session is initiated, it generates one cell at each unit of time until its termination. We examine the departure process of the leaky bucket policing mechanism driven by such an arrival process, and show that it too is long-range dependent for any token buffer size and any - finite or infinite - cell buffer size. Moreover, upper and lower bounds for the covariance sequence of the output process are established. The above results demonstrate that long-range dependence cannot be removed by the kinds of flow control schemes that are currently being envisioned for broadband networks. This revised version was published online in June 2006 with corrections to the Cover Date.     

Precise lattice parameter measurements in CsCl-Br solid solutions between room temperature and 90°K by powder x-ray diffraction

Solid solutions of CsCl-Br in five different concentrations were prepared in sealed quartz tubes by heating the mixture to 1123°K for 6–8 hr and quenching to room temperature. X-ray diffractograms were taken at eight different temperatures between room temperature and 90°K for these solid solutions using the YPC50NM powder diffractometer and a continuous flow cryostat. The observed lattice parameters for each sample at each temperature obtained from the powder diffractograms were then extrapolated to give the true lattice parameters using the least square method with Nelson-Riley extrapolation scheme. The values of the true lattice parameters at each concentration and at each temperature were tabulated and the results discussed. It is shown that the lattice parameters vs temperature for some concentrations exhibit an anomalous behaviour. Contribution No. 691     

Asymmetric synthesis of 6-(2′,3′,4′,5′,6′-pentafluorophenyl)-δ-lactones via “allyl”boranes: application for the synthesis of fluorinated analog of key pharmacophore of statin drugs

Asymmetric “allyl”boration of pentafluorobenzaldehyde with various α-pinene based “allyl”boranes provides homoallylic alcohols in high de and ee; the alcohols have been converted into δ-lactones via acryloylation, ring-closing metathesis and hydrogenation. Pentafluorophenyl analog of key pharmacophore of statin drugs has been synthesized using diastereoselective epoxidation and regioselective reduction as key steps.     

Tuning size and catalytic activity of nano-clusters of cobalt oxide

Cobalt oxides were prepared by three different methods: (1) by reacting cobalt nitrate with oxalic acid, (2) co-precipitating cobalt nitrate with sodium carbonate, and (3) using sodium dodecyl sulphate as organic surfactant. All three samples were characterized before and after calcination by solvent extraction and the resulting products examined by IR spectroscopy. In the case of method 3, the removal of surfactant was followed by TGA studies. Products from all three methods were identified by XRD. Peaks in low angle XRD indicate the porous nature of the oxides. The morphology of the pores was studied by transmission electron microscopy. Some irregular pore structures were obtained for samples from methods 1 and 2, with an average size of 4–6 nm. Only the product from method 3 using SDS as template showed ordered structure and optimum size, and Brunauer-Emmet-Teller surface areas of the as-prepared, as well as the treated samples, exhibited H3 type hysteresis. The samples from the three methods were used as catalysts in the oxidation reaction of cyclohexane under mild conditions and the catalytic efficiency of the cobalt oxide was comparable with mesoporous cobalt oxides.     

A total synthesis of spiruchostatin A

We achieved the total synthesis of the histone deacetylase inhibitor spiruchostatin A, as the prelude to the preparation of a combinatorial library of its analogues. Two key reactions were an asymmetric acetate aldol reaction using a Zr-enolate and macrolactonization using the Shiina method.     

Globin chain separation by SDS polyacrylamide gel electrophoresis. Simple screening method for elongated hemoglobin chains

A simple method for the separation of hemoglobin chains from hemolysate or globin, by sodium dodecyl sulfate polyacrylamide gel electrophoresis, is described. The alpha, beta, and gamma chains can be clearly separated from each other. The alpha chain has the highest mobility, the beta chain has a slower mobility than the gamma chain, while the delta chain has about the same mobility as the beta chain. Hemoglobins with elongated chains can easily be detected by this method. Tak-beta, elongated by 11 residues, moves much more slowly than betaA but is much faster than alpha Constant Spring which is elongated by 31 residues. Screening of several individuals with slow-moving hemoglobins using this method led to the finding of a case with Hb Tak-beta thalassemia and other carriers of Hb Tak.     

Rupture of thin stagnant films on a solid surface due to random thermal and mechanical perturbations

A generalized formalism for the rupture of a nondraining thin film on a solid support due to imposed random thermal and mechanical perturbations, modeled as a Gaussian white noise, is presented. The evolution of amplitude of perturbation is described by a stochastic differential equation. The average film rupture time is the average time for the amplitude of perturbation to equal to the film thickness and is calculated by employing a first passage time analysis for different amplitudes of imposed perturbations, wavenumbers, film thickness, van der Waals and electrostatic interactions and surface tensions. The results indicate the existence of an optimum wavenumber at which the rupture time is minimum. A critical film thickness is identified based on the sign of the disjoining pressure gradient, below which the film is unstable in that the rupture time is very small. The calculated values of rupture time as well as the optimum wavenumber in the present analysis agree well with the results of linear stability analysis for immobile as well as completely mobile gas-liquid film interfaces. For stable films, the rupture time is found to increase dramatically with film thickness near the critical film thickness. As expected, the average rupture time was found to be higher for smaller amplitudes of imposed perturbations, larger surface potentials, larger surface tensions and smaller Hamaker constants.     

Synthesis of homoallylic chiral tertiary alcohols via chelation-controlled diastereoselective nucleophilic addition on alpha-alkoxyketones: application for the synthesis of the C(1)-C(11) subunit of 8-epi-fostriecin

[reaction: see text] Chiral beta-syn-alkoxyhomoallylic alcohols derived from alkoxyallylboration of aldehydes upon oxidation provided the corresponding chiral ketones. Chelation-controlled nucleophilic addition to these ketones occurred in a highly stereoselective manner to afford anti-homoallylic tertiary alcohols. This methodology has been applied for the synthesis of the C(1)-C(11) subunit of C(8)-epi-fostriecin.