Evaluation of the accuracy of the determination of lead isotope ratios in wine by ICP MS using quadrupole, multicollector magnetic sector and time-of-flight analyzers

Different mass analysers [(quadrupole (Q), time-of-flight (TOF) and multicollector (MC) sector-field (SF)] of ions produced in an inductively coupled plasma were evaluated for the determination of lead isotope ratios in wine samples. A population of 20 wines of different origin including two reference wines from the EC Standards, Measurement and Testing Programme with concentrations varying between 7-140 mug Pb l(-1) was investigated. Wines were analyzed directly by Q ICP MS and MC ICP MS. The poor sensitivity of the TOF instrument, further aggravated by matrix signal suppression, did not allow the acquisition of data for wine samples that contained less than 50 mug l(-1) in the direct sample introduction mode. The separation and preconcentration of lead were therefore required. The precision obtained for the (206)Pb/(207)Pb and (208)Pb/(206)Pb were similar and equal to 0.14-2.7% for Q ICP MS, 0.04-0.17% for TOF ICP MS and 0.01-0.12% for MC ICP MS. The precision for (206)Pb/(204)Pb was 0.44-5.29, 0.15-1.7, 0.08-1.6%, respectively. On the level of accuracy, the data from TOF ICP MS and MC ICP MS were in good agreement. The accuracy of Q ICP MS data was judged satisfactory in comparison with the other techniques but their poor precision was a significant obstacle on the way of using these data for the determination of the geographic origin of wine.     

Luteone,a twenty three carbon terpenoid from the dorid nudi branch Cadlina luteomarginata

The structure of luteone ($\text{1}$), a twenty three carbon terpenoid, has been solved by performing a single crystal x-ray analysis on a 3,4-dinitrophenylhydrazone derivative.     

New dehydration in the pyrrolo[1,2–6-b]isoquinoline series. Preparation and structural identification of 3,5-dihydrobenz[f]indolizin-3-one

3,5-Dihydrobenz[f]indolizin-3-one was prepared by a novel dehydration reaction involving the heating of 1,2,3,5,10,10a-hexahydro[f]indolizine-3,10-dione with polyphosphoric acid. The structure of this new compound was established by X-ray crystallography, by nmr spectroscopy and by reduction to the known products 1,2,3,5-tetrahydrobenz[f]indolizin-3-one and 1,2,3,5,10,10a-hexahydrobenz[f]indolizin-3-one.     

'Non-covalent synthesis' of a chiral host of calix[6]arene and enantiomeric discrimination

'Non-covalent synthesis' of novel chiral hosts (calix[6]arene-chiral amine complexes) and its application to enantiomeric discrimination was investigated by (1)H NMR spectroscopy. The topology of a ternary complex was proposed for the calix[6]arene-amine-sulfoxide to rationalize the chiral recognition.     

Etude de l'équilibre azido ⇌ tétrazole dans la séric du thiazolo[2,3-e]-tétrazole. III. Effects des substituants

The substituent effects on azido/tetrazole equilibrium on a series of 2-substituted thiazoles, benzothiazoles, thiadiazoles, benzoxazoles and isoxazoles has been studied by proton magnetic resonance in two solvents (DMSO-d₆ and deuteriochloroform). For thiazole an excellent Hammett relationship was found, both for the 4 and 5 positions.     

Solution NMR techniques for large molecular and supramolecular structures

Transverse relaxation-optimized spectroscopy (TROSY) or generation of heteronuclear multiple quantum coherences during the frequency labeling period and TROSY during the acquisition period have been combined either with cross-correlated relaxation-induced polarization transfer (CRIPT) or cross-correlated relaxation-enhanced polarization transfer (CRINEPT) to obtain two-dimensional (2D) solution NMR correlation spectra of (15)N,(2)H-labeled homo-oligomeric macromolecules with molecular weights from 110 to 800 kDa. With the experimental conditions used, the line widths of the TROSY-components of the (1)H- and (15)N-signals were of the order of 60 Hz at 400 kDa, whereas, for structures of size 800 kDa, the line widths were about 75 Hz for (15)N and 110 Hz for (1)H. This paper describes the experimental schemes used and details of their setup for individual measurements. The performance of NMR experiments with large structures depends critically on the choice of the polarization transfer times, the relaxation delays between subsequent recordings, and the water-handling routines. Optimal transfer times for 2D [(15)N,(1)H]-CRIPT-TROSY experiments in H(2)O solutions were found to be 6 ms for a molecular weight of approximately 200 kDa, 2.8 ms for 400 kDa, and 1.4 ms for 800 kDa. These data validate theoretical predictions of inverse proportionality between optimal transfer time and size of the structure. The proton longitudinal relaxation times in H(2)O solution were found to be of the order of 0.8 s for structure sizes around 200 kDa, 0.4 s at 400 kDa, and 0.3 s at 800 kDa, which enabled the use of recycle times below 1 s. Since improper water handling results in severe signal loss, the water resonance was kept along the z-axis during the entire duration of the experiments by adjusting each water flip-back pulse individually.     

Hydrothermal synthesis and structure of the first tin(II) squarate Sn2O(C4O4)(H2O)—comparison with Sn2[Sn2O2F4]

A tin(II) squarate Sn₂O(C₄O₄)(H₂O) was synthesized by hydrothermal technique. It crystallizes in the monoclinic system, space group C2/m (no. 12) with lattice parameters a=12.7380(9) Å, b=7.9000(3) Å, c=8.3490(5) Å, β=121.975(3)°, V=712.69(7) Å³, Z=4. The crystal structure determined with an R=0.042 factor, consists of [(Sn₄O₁₀)(H₂O)₂] units connected from one another in the [101] and [010] directions via squarate groups to form layers separated by Sn(II) lone pairs. This compound presents the same remarkable structural arrangement as observed in the tin-oxo-fluoride Sn₂[Sn₂O₂F₄] inorganic compound with Sn(II) lone pairs E(1) and E(2) concentrated in large rectangular-shape tunnels running along [001] direction.     

Synthesis of (±)Dehydroxyglaupalol and Analogs

The natural furocoumarin dehydroxyglaupalol and two analogs were prepared by reaction of the appropriate 4-hydroxy-coumarin with 3-chloro-3-methylbutyne in basic medium, followed by catalytic hydrogenation of the exo double bond.     

Biodegradable and Biocompatible Silatrane Polymers

In this study, new biodegradable and biocompatible amphiphilic polymers were obtained by modifying the peripheral hydroxyl groups of branched polyethers and polyesters with organosilicon substituents. The structures of the synthesized polymers were confirmed by NMR and GPC. Organosilicon moieties of the polymers were formed by silatranes and trimethylsilyl blocks and displayed hydrophilic and hydrophobic properties, respectively. The effect of the ratio of hydrophilic to hydrophobic organosilicon structures on the surface activity and biological activity of macromolecules was studied, together with the effect on these activities of the macromolecules’ molecular weight and chemical structure. In particular, the critical micelle concentrations were determined, the effect of the structure of the polymers on their wetting with aqueous solutions on glass and parafilm was described, and the aggregation stability of emulsions was studied. Finally, the effect of the polymer structures on their antifungal activity and seed germination stimulation was examined.     

Stripping the latex: the challenge of miniemulsion polymerization without initiator,costabilizer and surfactant

When finally processed to provide the function for which the latex was selected―binding, protecting, finishing―components such as surfactant, costabilizer or initiator become generally useless, not to say detrimental. In this study, we show that miniemulsion photopolymerization provides a suitable method to create latex without the apparent addition of these three compounds. Indeed, UV-driven monomer self-initiation can create initiating radicals without the aid of initiator, the fast in situ photogenerated polymer can hinder Ostwald ripening with the assistance of external costabilizer, and finally, UV-transparent clay can replace conventional surfactant to ensure colloidal stabilization. Each strategy has been developed individually before being combined together to end up with a unique miniemulsion procedure free of initiator, costabilizer and surfactant. Such approach paves the way to a simplified and environmentally improved pathway towards aqueous polymer dispersions.