Buffering effects on the solution behavior and hydrolytic degradation of poly(β-amino ester)s

With a vast, synthetically accessible compositional space and highly tunable hydrolysis rates, poly(β-amino ester)s (PBAEs) are an attractive degradable polymer platform. Leveraging PBAEs in a wide range of applications hinges on the ability to program degradation, which, thus far, has been frustrated by multiple confounding phenomena contributing to the degradation of these charged polyesters. Basic conditions accelerate hydrolysis, yet reduce solubility, limiting water access to amines and esters. Further, the high buffering capacity of PBAEs can render buffers ineffective at controlling solution pH. To unify understanding of PBAE degradation and solution properties, this study examines PBAE hydrolysis as a function of pH and buffer concentration as well as polymer hydrophobicity. At low buffer concentrations, the PBAE amines and the acid produced during hydrolysis control solution pH. Meanwhile, at high buffer concentrations that afford relatively constant pH, hydrolysis rate increases with pH, despite the reduced PBAE solubility. Increasing the hydrophobic content of PBAEs eventually hinders the capacity of the polymer to accept protons from solution, limiting the pH increase and slowing hydrolysis. These studies showcase the role of buffering on the pH-dependent degradation and solution properties of PBAEs, providing guidance for programming degradation in applications ranging from drug delivery to thermosets.     

The existence of Thom classes

In this paper we consider the category of unstable modules over the Steenrod algebra. We prove the existence of finite primary decompositions in this category. Moreover, we prove the existence of Thom classes in noetherian unstable modules, i.e., elements that generate cyclic unstable submodules that are closed under the action of the Steenrod algebra. This in turn leads to the proof of the prime filtration theorem in the category of noetherian unstable modules. As an application we present a proof of the Landweber-Stong conjecture (now a theorem by D. Bourguiba and S. Zarati) that does not make use of the classification of injectives.     

The potential of pyrolysis/gas chromatography/mass spectrometry for determining the progress of lignification: An investigation of maturing asparagus sclerenchyma tissue

Sclerenchyma tissues from semi-mature and mature asparagus spears were analysed by pyrolysis/gas chromatography/mass spectrometry and by conventional chemical methods in order to determine the degree of lignification and compare analytical techniques. The pyrolysis data are similar to those obtained by a chemical method involving alkaline extraction at 70°C followed by spectrophotometric determination of phenolic content. The pyrolysis method was more rapid, sensitive and informative than the chemical technique and shows considerable potential for studying the chemical basis of the textural development of plant foods.     

Ethylene polymerization by novel Ziegler–Natta‐type catalysts obtained in situ by the oxidative addition of 8‐hydroxyquinoline‐based ligands to bis(1,5‐cyclooctadiene)nickel(0) and methylaluminoxane

Novel catalytic systems, prepared in situ by the oxidative addition of 8‐hydroxyquinoline ligands to bis(1,5‐cyclooctadiene)nickel(0) and activated by methylaluminoxane, were studied in ethylene polymerization. When 8‐hydroxyquinoline was employed, only oligomeric products were obtained. On the contrary, 5,7‐dinitro‐8‐hydroxyquinoline gave linear polyethylene (PE), but with a modest activity. For the catalyst based on 5‐nitro‐8‐hydroxyquinoline, the productivity was largely dependent on the content of free trimethylaluminum (TMA) present in the commercial aluminoxane. The progressive optimization of the TMA/oligomeric methylaluminoxane ratio increased the productivity, which reached 700 kg of PE/(mol of Ni × h), by an order of magnitude. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 200–206, 2006     

A short synthesis of 4-amino-3-hydroxybutyric acid (GABOB) via allyl cyanide

4-Amino-3-hydroxybutyric acid was synthesized from allyl cyanide in four steps in an overall yield of 38%. Ultrasonically promoted epoxidation of allyl cyanide with m-chloroperoxybenzoic acid giving oxiranylacetonitrile was used as a key step.     

Vascular endothelial and smooth muscle cell culture on NaOH-treated poly(epsilon-caprolactone) films: a preliminary study for vascular graft development

Tissue engineering offers the potential of providing vessels that can be used to replace diseased and damaged native blood vessels. The endothelization of a synthetic vascular graft minimizes the failures associated with blood clotting and platelet activation. The aim of this study was to culture vascular-derived endothelial and smooth muscle cells on both untreated and NaOH-treated poly(epsilon-caprolactone) (PCL) films, a biocompatible and bio-resorbable polymer, and to evaluate the behavior of both cell types as a preliminary study for vascular graft development. PCL films were prepared by hot pressing; characterized by DSC, IR, SEM, and scanning force microscopy; and treated with NaOH to increase the surface hydrophilicity before cell culture. Endothelial and smooth muscle cells, isolated from pig cava vein, were characterized by immunofluorescence and confocal microscopy studies of endothelial nitric oxide synthase and alpha-smooth muscle actin. Good adhesion, growth, viability and morphology of both the endothelial and smooth muscle cells on PCL films were obtained, but a light stimulation of mitochondrial activity was observed during short culture times. NaOH treatment improved the adhesion and enhanced the proliferation in both cell types. This verified the possible use of this modified polymer as a support in the preparation of a synthetic vascular graft. [Diagram: see text] SEM micrograph of smooth muscle cells cultured on NaOH-treated PCL film. (Original magnification: 1000x).     

Three-dimensional self-assembly of metallic rods with submicron diameters using magnetic interactions

Metallic rods with submicron diameters that contain disklike ferromagnetic sections self-assemble into highly stable, hexagonally close-packed arrays of rods. The rods were fabricated by electrodeposition in porous alumina membranes and comprised alternating sections of gold and nickel. The thicknesses of the ferromagnetic nickel sections were approximately one-half the diameter of the rods (400 nm); this geometry orients the "easy" axis of magnetization perpendicular to the long axis of the rod. After magnetization of the rods with a rare-earth magnet, followed by sonication of the suspension, the rods spontaneously assembled into three-dimensional (3D) bundles that, on average, contained 15-30 rods. A macroscopic model of the rods suggests that the most stable orientation of the magnetic dipoles for rods in a defect-free, hexagonally close-packed arrangement is in concentric rings with the dipoles oriented head-to-tail. This configuration minimizes the energy of the bundle and does not generate a net dipole for the structure. This work provides a simple demonstration that magnetic interactions between ferromagnetic objects can direct and stabilize the formation of ordered, 3D structures by self-assembly.     

Asymmetric dimers can be formed by dewetting half-shells of gold deposited on the surfaces of spherical oxide colloids

Asymmetric dimers consisting of gold microcrystals and spherical silica colloids have been fabricated by depositing thin films of gold onto the spherical colloids to form half-shells, followed by annealing at elevated temperatures. The capability and feasibility of this procedure have been demonstrated with silica and titania beads of 0.2-2 mum in diameter and gamma-Fe2O3/polystyrene@SiO2 core-shell particles 0.5 mum in size. The dimensions of gold microcrystals could be conveniently varied in the range of 100-650 nm by controlling the thickness of gold films and/or the diameter of the spherical colloids. This method provides another route to asymmetric dimers made of colloidal particles that could be different in size, chemical composition, surface functionality, density or sign of surface charge, bulk property, or a combination of these properties.     

Can the pi-facial selectivity of solvation be predicted by atomistic simulation?

This work is concerned with the rationalization and prediction of solvent and temperature effects in nucleophilic addition to alpha-chiral carbonyl compounds leading to facial diastereoselectivity. We study, using molecular dynamics simulations, the facial solvation of (R)-2-phenyl-propionaldehyde in n-pentane and n-octane at a number of temperatures and compare it with experimental selectivity data for the nBuLi addition leading to syn- and anti-(2R)-2-phenyl-3-heptanol, which give nonlinear Eyring plots with the presence of inversion temperatures. We have found from simulations that the facial solvation changes with temperature and alkane. Moreover, by introducing a suitable molecular chirality index we have been able to predict break temperatures (T(CI)) for the two solvents within less than 20 degrees of the inversion temperatures experimentally observed in the diastereoselective nBuLi addition. We believe this could lead to a viable approach for predicting inversion temperatures and other subtle solvent effects in a number of stereoselective reactions.