高强度高电导率聚乙炔的合成——醚类溶剂的结构对性能的影响

通过选用不同醚类结构做溶剂加热回流Ti(OBu)_4-AIEt_3催化剂,并采用非溶剂聚合方法进行乙炔聚合发现,所得HPPA膜的强度和电导率都有了较大提高。其中直链醚制得的PA膜强度(抗张强度大于100MPa)和空气稳定性比用环醚得到的PA膜高得多,但用前者时的乙炔聚合速率远低于后者。两体系得到的HPPA膜的碘掺杂电导率值相近(～10~3S/cm),拉伸后可达10~4S/cm量级。SEM、TEM及IR光谱的结果表明,不同醚制得的PA膜的纤维束直径及顺式含量有较大差别。     

π－烯丙基稀土配合物的合成、结构及其催化烯烃聚合反应机理的研究 Ⅲ．LiLn（π－C_3H_5）_4·nD催化异戊二烯和苯乙烯均聚合反应的研究

本文研究了ＬｉＬｎ（π－Ｃ_３Ｈ_５）_４·ｎＤ（Ｌｎ＝Ｌａ、Ｔｂ，ｎ＝３；Ｌｎ＝Ｃｅ、Ｐｒ、Ｎｄ、Ｓｍ、Ｇｄ、Ｅｒ，ｎ＝２；Ｌｎ＝Ｙ、Ｄｙ，ｎ＝２．５；Ｄ为二氧六环）催化异戊二烯和苯乙烯的均聚合反应．其中，钇配合物的催化活性为最高．聚异戊二烯顺式－１，４链节含量在４３－８１％．聚合体系内少量给电子体的加入使聚合物中３，４－链节含量高达８４％．所得聚苯乙烯为无规结构．     

~(13)C核磁共振研究稀土催化剂聚合双烯的机理

用~(13)C-NMR 方法测定了稀土顺丁二烯和聚异戊二烯链端结构及序列结构,从链端结构推测的聚合活性链端结构与前文是一致的。在聚异戊二烯中存在着“头-头”和“尾-尾”结构,这种结构引起活性链端甲基位置的改变,从而解释了稀土异戊二烯中3,4-链节的形成。测定了不同聚合温度对聚合物中顺、反结构含量的影响,可用活性链端的 anti-syn异构化加以解释。     

聚苯胺的化学合成及表征

本工作利用化学方法合成了具有较高电导率的聚苯胺.研究了聚合条件如反应介质的pH值,不同种类的酸及其浓度,氧化剂的用量对聚合的影响.用红外光谱、X-射线衍射、DSC等方法表征了所得的聚合物,并研究了该聚合物的掺杂反应.     

可溶性聚苯胺的合成及研究

本文报道了可溶性聚苯胺(PAn)的合成方法。通过对比可溶和不可溶PAn的导电性、电化学行为及IR光谱,说明它们的分子链基本结构相同。并测得了PAn在DMF-d_7中的~13C-NMR 谱。     

掺杂态聚苯胺的共振拉曼光谱研究

观测了聚苯胺(PAn)在不同状态(掺杂、反掺杂、碱式、氧化、还原)下的拉曼光谱.根据其光谱特性,结合其它实验结果,提出了掺杂态PAn分子链包含电荷分布不等的三种苦环和二种氮原子的四单元苯醌变体模型,指出质子酸掺杂系分子内氧化还原反应,讨论了PAn氧化程度对掺杂效率的影响.     

INFLUENCE OF DIALKYLZINC IN RARE-EARTH TERNARY CATALYST ON THE COPOLYMERIZATION OF CARBON DIOXIDE AND PROPYLENE OXIDE

Rare-earth ternary catalysts Y（CCl3COO）3-ZnR2-glycerin were prepared for the copolymerization of carbon dioxide and propylene oxide （PO）, where dialkylzincs （ZnR2） were diethylzinc, di（n-propyl）zinc, di（n-butyl）zinc, di（i-propyl）zinc, di（i-butyl）zinc, di（s-butyl）zinc,respectively. The Y（CCl3COO）3-ZnR2-glycerin catalysts displayed the highest catalytic activity at the molar ratio of Y（CCl3COO）3：ZnR2：glycerin = 1：20：10. In the same copolymerization condition, catalysts containing dialkylzincs with branched alkyl group showed lower catalytic activity than that with primary alkyl group. For those catalysts including dialkylzincs with primary alkyl group, their catalytic activity decreases with increasing number of carbon atom in the alkyl group with the following sequence： Y（CCl3COO）3-ZnEt2-glycerin 〉 Y（CCl3COO）3-Zn（n- Pr）2-glycerin〉Y（CCl3COO）3-Zn（n-Bu）2-glycerin. However, the alkyl group in the dialkylzinc does not influence the insertion of PO into the propagation chain end.     

手性丙烯酸酯液晶原位光聚合反应

手性丙烯酸酯液晶原位光聚合反应何流，张树范，金顺子，漆宗能，王佛松（中国科学院化学研究所北京１０００８０）关键词手性丙烯酸酯，原位光聚合，双折射，近晶相手性侧链液晶高分子显示近晶Ｓ！相，具有铁电性，在光电功能材料和非线性光学材料方面有潜在的应用前景’...     

Synthesis, characterization and solar cell application of a D-A copolymer with cyclopentadithiophene and fluorene as donor units

In this paper, a new D-A copolymer, PFDBCPDT, which consists of benzo-2,1,3-thiadiazole as acceptor units and cyclopentadithiophene and fluorene as donor units, was synthesized. The thermal, electrochemical, photophysical and photovoltaic properties of PFDBCPDT were studied. PFDBCPDT showed a low optical band gap of 1.84 eV, and relatively low HOMO level of ?5.69 eV. The best device performance was obtained by PFDBCPDT/PC₆₁BM (1:3) with 0.5 vol% DIO. The device exhibited a power conversion efficiency of 3.06%, with a relatively high open circuit voltage of 0.87 eV.     

Synthesis and Characteristics of Hole-transporting Materials Based on Biphenyl Diamine Derivatives with Carbazole Groups

IntroductionThe development of organic light-emitting diodes(OLEDs)has been the subject of intensive academicand industrial research that is directed toward the fabri-cation of large-area,monocolor and full color flat-paneldisplays[1].Ever since Tanget al…