Synthesis of O,O Ethane Bridged Bis-copper(II) Macrocycles. Selective Enzyme Model for Catecholase Activity

New mononuclear and dinuclear complexes [3-hydroxyethyl-1,3,5,8,11pentaazacyclotridecane]copper(II) (1)/nickel(II) (2) perchlorate and O,O ethane bridged bis-copper(II) (3)/nickel(II) (4) macrocycles have been synthesized and characterized by various spectroscopic techniques, viz. i.r., n.m.r., e.p.r., u.v.–vis. and conductance measurements. Spectral data and conductance measurements reveal that all the complexes are consistent with square-planar geometry and are ionic in nature. The catalytic activity of the dinuclear Cu(II) complex (3) in the presence of pyrocatechol was determined spectrometrically by monitoring the increase of the o-benzoquinone characteristic absorption band at 25,000 cm⁻¹ with respect to time in DMF saturated with molecular oxygen. The kinetic parameters V_max (2.8×10⁻³ M s⁻¹) and K_M (1.4×10⁻³ mm) have been determined by Michaelis–Menten method. Electrochemistry of the dinuclear Cu(II) complex has been studied in the presence of molecular oxygen with pyrocatechol and without pyrocatechol at a scan rate of 0.1 V s⁻¹ by cyclic voltammetry. On addition of pyrocatechol, complex shows a shift in E_pc, E_pa and E_1/2 values indicating the oxidation of substrate (pyrocatechol).     

New asymmetric N2S2 macrocycles,their metal chelates and the photokinetics of DNA-complex interaction

New asymmetric ligands have been synthesized by condensing o-phenylene diamine with CS₂ and PhCHO/MeCHO, and their complexes with Mn^II, Co^II, Ni^II, Cu^II and Zn^II were prepared and characterized by elemental analyses, conductivity measurements, i.r., u.v.–vis., e.p.r. and n.m.r. spectra. The transition metals in the complexes show square planar geometry and are ionic. Photokinetic studies of the DNA-metal complexes [C₁₀H₁₀S₄N₂Cu](NO₃)₂ and [C₁₀H₁₀S₄N₂Ni](NO₃)₂ were carried out and the rate constants k_{(DNA-complex)} were calculated. The results indicate that DNA reacts with the metal complex in two steps. DNA first undergoes structural degradation and is then completely hydrolysed as indicated by spectral changes consistent with earlier results. The asymmetric N₂S₂ macrocyclic metal complexes show a strong propensity for DNA inhibition and can be used as an intercalating binding model.     

Interaction of a new cobalt(II) complex of five-coordinated chiral porphyrin with calf thymus DNA

A new template-directed chiral porphyrin [(TPP)Co(Trp)], where TPP = tetraphenylporphyrin and Trp = 1-tryptophan, was prepared and characterized by various physico-chemical methods. Interaction of [(TPP)Co(Trp)] with calf thymus DNA was studied by u.v.–vis. spectroscopy and cyclic voltammetry. The complex [(TPP)Co(Trp)], after interaction with calf thymus DNA, shows a shift in the absorption spectrum and a large hypochromicity, indicating an intercalating binding mode. This observation was further confirmed by the electrochemical behavior of [(TPP)Co(Trp)] before and after interaction with calf thymus DNA. The complex experiences a negative shift in E _1/2 and a decrease in E _p. The ratio of cathodic to anodic peak currents i _pc/i _pa was 1 for [(TPP)Co(Trp)] while for DNA bound complex i _pc/i _pa 1, suggesting that the calf thymus DNA moiety is bound strongly to the complex [(TPP)Co(Trp)]. Kinetic studies of the DNA-porphyrin complex reveal a psuedo-first order rate law as the plot of k _obs versus calf thymus DNA is linear passing through the origin.     

Synthesis,characterization and energetic properties of novel 1-methyl-1,2,4-triazolium N-aryl/N-pyridinyl ylids

Synthesis, characterization and energetic properties of novel, nitrogen-rich 1-methyl-1,2,4-triazolium N-aryl/N-pyridinyl ylids 3a–m are reported.     

Quantification of Tin and Lead in Binary Alloys Using Voltammetry of Immobilized Microparticles

Voltammetry of immobilized microparticles (VMP) has been used in this work for the quantitative determination of tin and lead particles in their binary alloys. Carbon paste electrodes, which contained small amounts of tin and lead or their mixtures, were used as working electrodes and square wave voltammograms of each electrode were recorded. Quantification was performed using optimum experimental conditions, obtained by an experimental design technique. The calibration was made by measuring the percentage peak height of each metal taking the sum of peak currents of the both metals as 100 %. The results were compared with quantitative results of X‐ray fluorescence (XRF) technique to evaluate the capability of VMP method in its quantitative determination of solid samples.     

Microcapillary electrochemical droplet cells: applications in solid-state surface analysis

Capillary–based microcells, also known as microcapillary electrochemical droplet cells, have proved their capabilities in various electrochemical surface investigations in recent decades. Due to the large measured current density and the high limiting current, this technique provides high–resolution electrochemical responses. Current densities in the range from a few femto to pico Acm^?2 to hundreds of Acm^?2 can be measured using this technique. Various applications for microcapillary cells have been reported. Technical limitations, such as the Ohmic drop and changes in the composition of the measurement area near the tip of the microcapillary have also been considered by some researchers. The rapid increase in the application of microcells and the increase in the number of related reports published in the literature have paralleled recent attempts to develop and improve microcell setups, showing that this technique is already well established for electrochemical surface studies.     

Mechanical polishing,surface roughness,near‐surface deformation,and electrochemical corrosion of Alloy 690TT

The effects of mechanical grinding/polishing, surface roughness, and near‐surface deformation on the electrochemical corrosion behavior of thermally treated (TT) Alloy 690 were studied in a sodium chloride solution. The X‐ray photoelectron spectroscopy and transmission electron microscopy analyses revealed that mechanical grinding/polishing can change the ratio of the elements at the surface of the as‐received Alloy 690TT specimen by removing its Cr‐rich outer layer and causing deformation at the near‐surface microstructure, something which has a direct impact on the rate of the oxygen reduction reaction (ORR), the pitting potential (E_pit), and the corrosion potential (E_corr) of Alloy 690TT. It was observed that the ratio of Cr in the surface is a significant factor that controls the rate of the ORR and the corrosion parameters such as E_corr. Higher amounts of Cr at the surface accelerate the ORR. The near‐surface deformation shifts the E_pit values towards less positive potentials. It was also found that due to the different near‐surface chemical composition of the as‐received Alloy 690TT specimen compared with the ground and the polished specimens, the surface roughness parameters do not have a regular correlation with the rate of the ORR and the values of the E_corr and the E_pit. Only the passive current density increases when the surface roughness is increased. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis, characterization and in vitro DNA binding studies of tin(IV) complexes of tert-butyl 1-(2-hydroxy-1-phenylethylamino)-3-methyl-1-oxobutan-2-yl carbamate

Tin(IV) complexes 1(a and b) and 2(a and b) of valine derived peptide derivatives were synthesized and characterized on the basis of elemental analysis, IR, ¹H, ¹³C, ¹¹⁹Sn NMR, ESI-MS spectra and molar conductance measurements. The C-Sn-C angle was estimated from ^I3C and ¹H NMR data ¹J(¹¹⁹Sn, ^I3C) = 623 Hz; solution ²J(¹¹⁹Sn, ¹H) = 93.04 Hz to be 149.9°. In vitro binding studies of complexes 1 and 2 under physiological conditions at room temperature with CT-DNA were carried out employing UV-visible, fluorescence, circular dichroism and viscometric studies. The binding affinity of the complexes was quantified by calculating the K_b values and it follows the order 2a > 1a > 2b > 1b. To further examine the specific mode of binding, the interaction of complexes 2(a and b) were carried out with 5′GMP and 5′TMP by using absorption and NMR (¹H, ³¹P) spectroscopy. The supercoiled pBR322 plasmid DNA cleavage activity of the complexes was ascertained by gel electrophoresis assay. The complexes cleave supercoiled pBR322 plasmid DNA efficiently into its nicked form at micromolar concentrations.     

Synthesis of new chiral heterocyclic Schiff base modulated Cu(II)/Zn(II) complexes: their comparative binding studies with CT-DNA, mononucleotides and cleavage activity

New Schiff base ligand L derived from the condensation reaction of 2-amino-3-formylchromone with (R)-2-amino-2-phenylethanol was synthesized and characterized which involves combination element of ammine functionality and naturally occurring heterocyclic chromone, 4H-benzopyran-4-one. Subsequently, their complexes 1 and 2 with Cu(NO?)? and Zn(NO?)?, respectively were prepared. The DNA binding studies of the ligand L and complexes 1 and 2 with CT-DNA as compared to classical anticancer drug cisplatin were carried out by employing different optical methods viz, UV-vis, fluorescence, circular dichroism and viscosity measurements. Furthermore, the absorption studies, 1H and 31P with mononucleotides were also monitored to examine the base specific interactions of the transition metal complexes which revealed a higher propensity of copper(II) complex 1 for 5'-GMP while for zinc(II) complex 2 towards 5'-TMP involving groove binding mechanism of the complexes towards DNA. The complex 1 exhibits a remarkable DNA cleavage activity with pBR322 DNA in presence of different activators and cleavage reaction involves various oxygen species suggesting the involvement of active oxygen species for the DNA scission.