Electrical properties and memory effect in the field effect transistor based on organic ferroelectric insulator and pentacene

We have fabricated a field effect transistor (FET) based on an organic ferroelectric insulator and molecular conductor, and investigated the electrical properties and memory effects on the PEN-FET. We have observed a drastic change in the drain current at around the coercive electric fieldE _c of the organic ferroelectric insulator in not only a FET (PEN-FET) based on a pentacene (PEN) film but also a FET (IPEN-FET) based on an iodine doped PEN film. The magnitude of the change of the drain current for the IPEN-FET is 200 times larger than that for the PEN-FET. It is expected from these results that the PEN-FET (especially the IPEN-FET) is an improvement in such devices, since it operates at a low gate electric field accompanied by the appearance of the spontaneous polarization in the organic ferroelectric insulator. In addition, we have found that the drain current for the PEN-FET does not return to the initial drain current ofE _G =0 V/cm for more than one week, even if the gate electric field is changed to 0 V/cm from 500 V/cm(>E _c ). From these results, it is suggested that the PEN-FET becomes a memory device.     

Fluorescence labeling of oligosaccharides useful in the determination of molecular interactions.

A simple method to label oligosaccharides with a multifunctional fluorescent group was developed. Oligosaccharides were quantitatively labeled at their reducing termini with pyrene butanoic acid hydrazide. The pyrene-labeled oligosaccharides were successfully applied to fluorescence polarization measurements and ELISA at picomole quantity, which was not previously reached by other procedures. This labeling method should prove to be useful in a variety of aspects in glycobiology.     

Unsaturated bond existing in tetrafluoroethylene-propylene-vinylidene fluoride terpolymer

Infrared and nuclear magnetic resonance (NMR) spectroscopies have been applied for quantitative comparison on unsaturated bonds in tetrafluoroethylene (TFE)-propylene (P)-vinylidene fluoride (VdF) terpolymers. These spectroscopies have led to consistent results while they are based on completely different principles. It is shown that the absolute concentration can be evaluated from NMR measurements. The behavior of unsaturation has been discussed in terms of after-treatment such as wet and dry treatments. The result obtained here can give the important information to improve the performance of fluoroelastomer based on TFE-P-VdF terpolymers.     

Sulfonylcarbamimidic azides from sulfonyl chlorides and 5-aminotetrazole

Treatment of o-nitrobenzenesulfonyl chloride ( 3 ) with 5-aminotetrazole (5-AT) gave [(2-nitrophenyl)-sulfonyl]carbamimidic azide ( 6 ), a ring-opened isomer of the expected N-(1H-tetrazol-5-yl)-2-nitrobenzenesulfonamide ( 4 ). Sulfonylcarbamimidic azide 6 was converted to 2-amino-N-(aminoiminomethyl)benzene-sulfonamide ( 7 ) with ethanolic stannous chloride, and to 3-amino-1,2,4-thiadiazine 1,1-dioxide ( 8 ) with sodium dithionite. Methanesulfonyl chloride ( 9 ) and 5-AT gave 2-(methylsulfonyl)carbamimidic azide ( 10 ), which isomerized to 5-[(methylsulfonyl)amino]-1H-tetrazole ( 11 ) in warm ethanol. Attempted cycloaddition of 2-(phenylsulfonyl)carbamimidic azide ( 13 ) and ethyl vinyl ether led only to alkylated tetrazole products. In addition, other tetrazole-alkylating reactions are described. Isomers produced from these alkylations were differentiated with ¹³C nmr spectroscopy.     

Evaluation of the disintegration time of rapidly disintegrating tablets via a novel method utilizing a CCD camera

Many kinds of rapidly disintegrating or oral disintegrating tablets (RDT) have been developed to improve the ease of tablet administration, especially for elderly and pediatric patients. In these cases, knowledge regarding disintegration behavior appears important with respect to the development of such a novel tablet. Ordinary disintegration testing, such as the Japanese Pharmacopoeia (JP) method, faces limitations with respect to the evaluation of rapid disintegration due to strong agitation. Therefore, we have developed a novel apparatus and method to determine the dissolution of the RDT. The novel device consists of a disintegrating bath and CCD camera interfaced with a personal computer equipped with motion capture and image analysis software. A newly developed RDT containing various types of binder was evaluated with this protocol. In this method, disintegration occurs in a mildly agitated medium, which allows differentiation of minor distinctions among RDTs of different formulations. Simultaneously, we were also able to detect qualitative information, i.e., morphological changes in the tablet during disintegration. This method is useful for the evaluation of the disintegration of RDT during pharmaceutical development, and also for quality control during production.     

Positive ion chemistry of esters of carboxylic acids in air plasma at atmospheric pressure

Ionization of esters of carboxylic acids RCOOR' (R = H, alkyl; R' = alkyl) within the air plasma of the Atmospheric Pressure Chemical Ionization (APCI) source occurs largely via H(+)-transfer and, to a minor extent, via NO(+) association. The protonated ester MH(+) is normally observed as M(2)H(+) and as higher aggregates (M(3)H(+), M(3)H(+)(H(2)O)) also at high source temperature. The behavior of M(2)H(+) upon collisional activation is consistent with the reported dissociation of proton-bound dimers to MH(+) species that, in turn, fragment according to the known paths of lowest energy. In addition, other important product ions form within the plasma, some in very high relative abundance, which are attributed to ion-molecule condensation reactions between neutral M and either MH(+) or M(2)H(+) resulting in the elimination of CO, R'OH, alkene from the alkoxy moiety of the ester and HCOOH. A general scheme is proposed to account for the experimental observations, which suggest that the encounter complex formed between MH(+) and M or between M(2)H(+) and M may either collisionally relax to the protonated dimer or trimer, respectively, or react via covalent bond forming and cleaving steps to eliminate stable neutral molecules. The proposed scheme is supported by both the observed concentration dependence and the temperature dependence of the products relative abundances within the plasma. Such reactions can be the dominant process, as in the case of formate esters. A second significant ionization route involves addition of NO(+) to form M(n)NO(+) (n = 1, 2, 3). An additional product corresponding to [M(2)NO(+) - CO(2)] is also observed with iso- and n-butyl formate esters.     

Positive and negative ion chemistry of the anesthetic halothane (1-bromo-1-chloro-2,2,2-trifluoroethane) in air plasma at atmospheric pressure

The ion chemistry of 1-bromo-1-chloro-2,2,2-trifluoroethane (the common anesthetic halothane) in air plasma at atmospheric pressure was investigated by atmospheric pressure chemical ionization mass spectrometry (APCI-MS). The major positive ion observed at low declustering (API interface) energies is the ionized dimer, M(+.)M, an unexpectedly abundant species which possibly is stabilized by two H-bonding interactions. At higher energies [M--HF](+.) and [M--Br](+) prevail; the former, corresponding to ionized olefin [ClBrC=CF(2)](+.), appears to originate from M(+.)M and is quite stable towards fragmentation. The latter fragment ion ([M--Br](+)) and its analogue, [M--Cl](+), which is also observed though at much lower abundance, are originally ethyl cations (+)CHX--CF(3) (X = Br, Cl) which, upon collisional activation, rearrange and fragment to CHFX(+) via elimination of CF(2). All of the above described ions are also observed in humid air: in addition, the oxygenated ion [ClBrC=CFOH](+.) also forms in humid air via water addition to [ClBrC=CF(2)](+.) and HF elimination, as observed earlier for ionized trichloroethene. In contrast with similar chloro- and fluoro-substituted ethanes, halothane does not react with H(3)O(+) in the APCI plasma, a result confirmed by selected ion APCI triple-quadrupole (TQ) experiments. Major negative ions formed from halothane in the air plasma are Br(-) and, to a lesser extent, Cl(-), and their complexes with neutral halothane. APCI-TQ experiments indicated that Br(-) and Cl(-) are formed via reaction of halothane with O(2) (-.), O(2) (-.)(H(2)O) and O(3) (-.), possibly via dissociative electron transfer or nucleophilic substitution. Competing proton transfer was also observed in the reaction with O(2) (-.) and, at high halothane pressure, also with O(2) (-.)(H(2)O); at lower pressures the molecular anion M(-.) was observed instead. The other minor anions of the air plasma, NO(2) (-), N(2)O(2) (-.) and NO(3) (-), were found to be unreactive towards halothane.     

Effect of hydrophobic amino acids on the conformational change of decapeptides in micellar environments

A series of peptides containing various hydrophobic amino acids [methionine (Met), leucine (Leu), norleucine (Nle), phenylalanine (Phe), 2-aminooctanoic acid (Aoc), and 2-aminodecanoic acid (Ade)] were synthesized and their conformations were studied using circular dichroism (CD) spectroscopy in different solvents such as water, methanol, and aqueous solution of ammonium tetradecanesulfonate. Peptides containing hydrophobic amino acids with linear side chains formed -sheets in water and methanol. Electrostatic interaction between the charged side chain (lysine) and a micelle consisting of an anionic surfactant, ammonium tetradecanesulfonate, is necessary for the formation of -helices in micellar environments. The conformational transition from -helix to -sheet structure required moderate hydrophobicity and linear side chains. This conformational transition depended on the surfactant concentration.     

Characterization of low molecular weight organic acids from beech wood treated in supercritical water

Japanese beech (Fagus crenata Blume), its cell wall components, and model compounds were treated by supercritical water (380°C, 100 MPa) for 5 s using a batch-type reactor to investigate the production behavior of low molecular weight organic acids. It was found that cellulose and hemicellulose were decomposed to formic acid, pyruvic acid, glycolic acid, acetic acid, and lactic acid, whereas lignin was barely decomposed to such organic acids under the given conditions. However, after prolonged treatment (380°C, 100 MPa, 4 min) of lignin, some organic acids were recovered owing perhaps to the decomposition of the propyl side chain of lignin. It was additionally revealed that the predominant organic acid recovered was acetic acid, which might be derived from the acetyl group of hemicellulose in Japanese beech.     

Application of samarium diiodide (SmI2)-induced reduction of gamma-acetoxy-alpha,beta-enoates with alpha-specific kinetic electrophilic trapping for the synthesis of amino acid derivatives

Gamma-acetoxy-alpha,beta-enoates were easily reduced by samarium diiodide (SmI2) in THF to generate samarium dienolates which were kinetically trapped with ease at their alpha-positions by electrophiles (proton, aldehydes or ketones) to yield (E)-alkene dipeptide isosteres or gamma-amino acid derivatives in high chemical yields.