Rheology and fiber degradation during shear flow of carbon-fiber-reinforced polypropylenes

The processing of fiber-reinforced thermoplastics is often accompanied by a significant fiber fracture. Therefore, it is important to assess the effect of processing variables on the extent of fiber damage occurring during product fabrication, such as extrusion or injection molding. The present paper discusses fiber damage caused by shear forces exerted on the composite by a molten matrix in both experimental and theoretical terms. The degradation process in carbon fiber-polypropylene composites is studied in a broad range of shear rates, although it occurs significantly only under high shearing in a capillary. Changes in fiber length and its distribution during the multi-flow through a capillary, as well as the materials’ rheological properties found in research after shearing, are discussed and the results are compared with a model of fiber-length analysis for the mixing-regrinding process. Published in Russian in Vysokomolekulyamye Soedineniya, Ser. A, 2006, Vol. 48, No. 9, pp. 1628–1639. The text was submitted by the authors in English.     

Anionic oligomerization of methacrylonitrile

The anionic oligomerization of methacrylonitrile by alcoholic solutions of sodium alkoxide in dimethyl sulfoxide, methanol and ethanol was studied. The DP of the oligomers was directly proportional to the monomer concentration and inversely proportional to the alcohol concentration, in accordance with the equation DP = K[MAN]/[ROH], K being equal to K_p/K_tr. The value of K in DMSO (with sodium methoxidemethanol) was 2.9 ± 0.2, in methanol was 1.5 ± 0.1, and in ethanol (with sodium ethoxide as initiator) was 1.9 ± 0.1. The physical properties of the oligomers are given.     

Correlation between the structure of water in the vicinity of carboxybetaine polymers and their blood-compatibility

The structure and hydrogen bonding of water in the vicinity of carboxybetaine homopolymer (poly[1-carboxy-N,N-dimethyl-N-(2'-methacryloyloxyethyl)methanaminium inner salt] (PolyCMB), and a random copolymer of CMB and n-butyl methacrylate, Poly(CMB-r-BMA), with various molecular weights were analyzed in their aqueous solutions and thin film with contours of O-H stretching of Raman and attenuated total reflection infrared (ATR-IR) spectra, respectively. The relative intensity of the collective band (C value) corresponding to a long-range coupling of O-H stretchings of the Raman spectra for aqueous solution of Poly(CMB-r-BMA) was very close to that for pure water, which is in contrast with the smaller C value in aqueous solution of ordinary polyelectrolytes. The number of hydrogen bonds collapsed by the presence of one monomer residue (N(corr) value) of PolyCMB and Poly(CMB-r-BMA) (CMB, 45 mol %) (M(w), 1.14 x 10(4) and 1.78 x 10(4), respectively) could be calculated from the C value. The N(corr) values were much smaller than those for ordinary polyelectrolytes and close to those for nonionic water-soluble polymers such as poly(ethylene glycol) and poly(N-vinylpyrrolidone). Furthermore, a water-insoluble Poly(CMB-r-BMA) with a large BMA content (M(w) = 347 kD, CMB 27 mol %) could be cast as a thin film (thickness, ca. 10 microm) on a ZnSe crystal for the ATR-IR analyses. At an early stage of sorption of water into the Poly(CMB-r-BMA) film, the O-H stretching band of IR spectra for the water incorporated in the film was similar to that for free water, which is in contrast with the drastic change in the O-H stretching band of water incorporated in polymer films such as poly(methyl methacrylate) (PMMA) and poly(n-butyl methacrylate) (PBMA). The theoretical vibrational frequency for water molecules hydrating a betaine molecule calculated by using a density functional method supported the experimental results. The adhesion of human platelets to Poly(CMB-r-BMA) films was much less than that to PMMA and PBMA. With an increase in the content of CMB residue, the number of platelets adhered to the Poly(CMB-r-BMA) film drastically decreased and then gradually increased, probably due to the increase in the roughness of the film surface. These results suggest that the carboxybetaine monomer residues with a zwitterionic structure do not significantly disturb the hydrogen bonding between water molecules in both aqueous solution and thin film systems, resulting in the excellent blood-compatibility of the carboxybetaine polymers.     

Spectroscopic and excited-state properties of tri-9-anthrylborane I: Solvent polarity effects

Spectroscopic and excited-state properties of tri-9-anthrylborane (TAB), showing unique absorption and fluorescence characteristics originating from p(boron)-pi(anthryl group) orbital interactions, were studied in 12 solvents. Although the absorption maximum energy (nu(a)) of TAB which appeared at around 21 x 10(3) cm(-1) (band I) was almost independent of the solvent polarity parameter, f(X) (f(X) = (D(s) - 1)/(2D(s) + 1) - (n(2) - 1)/(2n(2) + 1) where D(s) and n represent the static dielectric constant and the refractive index of a solvent, respectively), the fluorescence maximum energy (nu(f)) showed a linear correlation with f(X). The f(X) dependence of the value of nu(a) - nu(f) demonstrated that the change in the dipole moment of TAB upon light excitation was approximately 8.0 D, indicating that absorption band I was ascribed to an intramolecular charge-transfer transition in nature. The excited electron of TAB was thus concluded to localize primarily on the p orbital of the boron atom. Furthermore, it was shown that the fluorescence lifetime and quantum yield of TAB varied from 11.8 to 1.1 ns and from 0.41 to 0.02, respectively, with an increase in f(X). The present results indicated that the nonradiative decay rate constant (k(nr)) of TAB was influenced significantly by f(X). Excited-state decay of TAB was understood by intramolecular back-electron (charge) transfer from the p orbital of the boron atom to the pi orbital of the anthryl group, which was discussed in terms of the energy gap dependence of k(nr). Specific solvent interactions of TAB revealed by the present spectroscopic and photophysical studies are also discussed.     

Temperature-Responsiveness of A-B-A Block Telomers at Solid-Liquid Interfaces

Macroinitiators were prepared by coupling disuccinimidyl ester of 4,4'-azobis(cyanovaleric acid) with poly(N-isopropylacrylamide) (PIPA), which had an amino group at its end. Styrene was telomerized with the initiators in THF. When the styrene content in the A-B-A block telomer obtained (PIPA-b-PSt-b-PIPA) was high, the telomer formed an irreversible aggregation resulting in microspheres, whereas the telomer with a much shorter styrene block could be dispersed monomolecularly. The telomers dispersed in water were aggregated by raising the temperature above 32 degrees C due to a coil-globule transition of PIPA moieties. The PIPA-b-PSt-b-PIPA could be strongly adsorbed to polystyrene (PSt) solid surfaces to form a layer, and the PSt blocks might lay on the PSt surface and the PIPA blocks might direct to the solution phase. The contact angle of air bubbles on the surface of telomer-coated PSt in the air-in-water system was dependent on temperature; that is, with the increase in temperature the contact angle of air bubbles largely decreased and leveled off above the coil-globule transition temperature (Tc). Correspondingly, the amount of protein Concanavalin A adsorbed to the telomer layer deposited on the PSt surface increased gradually with an increase in temperature and leveled off above the Tc. These phenomena were attributed to the changes in hydrophobicity of the telomer layer below and above the Tc. The usefulness of macroinitiators in preparing various kinds of block telomers which have responsiveness to external stimuli was strongly suggested. Copyright 1999 Academic Press.     

Electron microscope observation of lattice defects in the FeCr σ-phase

The lattice image of the FeCr σ-phase was observed by high-resolution electron microscopy with the c axis of the tetragonal cell parallel to the incident beam. It was found that bright dots of the observed image correspond to the positions of atoms in the $\text{z = ±}\text{1}\text{4}$ planes of the σ-phase structure. Sequence faults were found in the irregular part of the lattice image. The analysis of the faults shows that an extra plane of $\text{1}\text{2}\text{a}{}_0$ width is inserted into the regular structure and one side of the fault is slightly shifted parallel to the fault plane with respect to the other side, which is consistent with the model proposed by Frank and Kasper. A unit cell step of the sequence faults was found and a model of the step was proposed.     

Preparation of light-stable micelles with azo dyes from a nonamphiphilic random block copolymer

Light-stable micelles with azo dyes were prepared by micelle formation of a nonamphiphilic diblock copolymer containing azobenzene and UV absorbent at ca. 1 mol% as the unit ratios. The nonamphiphilic block copolymer consists of two different kinds of random copolymer blocks: poly[4-(phenylazophenoxymethyl)styrene-co-vinylphenol] (P(AS-co-VPh)) and poly[4-(2-hydroxybenzophenoxymethyl)styrene-co-styrene] (P(HBS-co-St)). This random block copolymer, P(AS-co-VPh)-b-P(HBS-co-St) formed the micelles in the presence of 1,4-butanediamine (BDA) through hydrogen bond cross-linking between the VPh units via BDA. The micelles had the azobenzene moieties at the cores and the UV absorbents at the coronas. The micelles showed a small color difference in color fading experiments, in comparison with the unimers and with micelles having no UV absorbent at the coronas. It is significant that the diblock copolymer forms the micelles and has the UV absorbents at the coronas to suppress the color fading. Furthermore, the chain length of ,-diamines had no effect on the hydrodynamic radius of the micelles, but affected the aggregation number and the cmc.     

Oxoaminium salts as initiators for cationic polymerization of vinyl monomers

Oxoaminium salt ( 1 ), derived from 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO, 2 ) by one-electron oxidation, could be an initiator for cationic polymerization of vinyl monomers such as isobutyl vinyl ether (IBVE), 2,3-dihydrofuran, p-methoxystyrene, N-vinyl pyrrolidone, etc., to give the corresponding polymers, when 1 had a low nucleophilic counter anion. Formation of the adducts of 1 and IBVE as well as ¹H-NMR and IR data suggested the formation of polymers containing N? O? C structure as the polymer head group. In the polymerization of IBVE, the effects of solvent and concentration of 1 were little observed, however the polymerization rate was dependent on temperature. Furthermore, the thermal reaction of the polymers obtained, which were regarded as prepolymers for block copolymerization and polymeric initiators for radical polymerization, was studied. For example, poly(2-benzylidene-1,3-dioxane) obtained by the polymerization of 2-benzylidene-1,3-dioxane with oxoaminium hexafluoroantimonate ( 1, X = SbF₆) was employed as an initiator for radical polymerization of MMA to give its block copolymer with PMMA. © 1993 John Wiley & Sons, Inc.