Dendrimers as scaffolds for multifunctional reversible addition–fragmentation chain transfer agents: Syntheses and polymerization

The synthesis and characterization of novel first‐ and second‐generation true dendritic reversible addition–fragmentation chain transfer (RAFT) agents carrying 6 or 12 pendant 3‐benzylsulfanylthiocarbonylsulfanylpropionic acid RAFT end groups with Z‐group architecture based on 1,1,1‐hydroxyphenyl ethane and trimethylolpropane cores are described in detail. The multifunctional dendritic RAFT agents have been used to prepare star polymers of poly(butyl acrylate) (PBA) and polystyrene (PS) of narrow polydispersities (1.4 < polydispersity index < 1.1 for PBA and 1.5 < polydispersity index < 1.3 for PS) via bulk free‐radical polymerization at 60 °C. The novel dendrimer‐based multifunctional RAFT agents effect an efficient living polymerization process, as evidenced by the linear evolution of the number‐average molecular weight (M_n) with the monomer–polymer conversion, yielding star polymers with molecular weights of up to M_n = 160,000 g mol^?1 for PBA (based on a linear PBA calibration) and up to M_n = 70,000 g mol^?1 for PS (based on a linear PS calibration). A structural change in the chemical nature of the dendritic core (i.e., 1,1,1‐hydroxyphenyl ethane vs trimethylolpropane) has no influence on the observed molecular weight distributions. The star‐shaped structure of the generated polymers has been confirmed through the cleavage of the pendant arms off the core of the star‐shaped polymeric materials. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5877–5890, 2004     

Proteins Entrapped in Silica Monoliths Prepared from Glyceroxysilanes

The preparation of discrete polyol based silane precursors derived from glycerol by a simple one-pot process is described. These polyol-based silanes could be hydrolyzed under mild pH conditions and upon gelation resulted in the formation of optically clear, monolithic, mesoporous silica. The hydrolysis and condensation reactions lead to cure rates that are very sensitive to ionic strength, but are almost unaffected by pH in contrast to those of alkoxysilanes derived from primary alcohols such as Si(OEt)₄. Residual glycerol in the silica monolith could be removed by washing, or could be left in the silica to reduce the magnitude of shrinkage during long term storage. The biocompatible glyceroxysilane precursors lead to materials that were able to retain the activity of entrapped enzymes over repeated cycles of use for periods of up to several months.     

Monte Carlo determinations of the beta dose rate to tooth enamel

The results of Monte Carlo simulations of the beta dose rate to enamel are presented. The dose rates are the most comprehensive to date, incorporating the beta spectrum from 21 different radionuclides, all internal conversion and Auger electrons, the majority of the bremsstrahlung radiation, effects due to radon loss in the uranium series, and variations in the moisture content of the sediment. Applications to a new dating technique in archaeology using electron spin resonance and beta-gradient isochrons are discussed.     

The electron ionization rate in multilayered semiconductor structures

We present theoretical results of the electron impact ionization rate in GaAs/AlGaAs multiquantum well structures as a function of applied electric field for various geometries, i.e., well and barrier widths. In addition, we present preliminary measurements of the current-voltage characteristics of MBE grown devices which demonstrate very low leakage current as well as sharp breakdwon behavior. It is found that the net ionization rate, determined by averaging over the constitutent GaAs and AlGaAs layers, approaches the weighted average of the constituent bulk rates at high electric field strengths; the potential discontinuity is relatively unimportant. The electron ionization rate within the well regions alone is still higher than that in bulk GaAs, but is insufficiently enhanced to compensate for the much lower rate in the AlGaAs layers. As the field is lowered to 250.0 kV/cm, the average ionization rate in the multiquantum well structure becomes larger than in the bulk.     

Fluoride effect on the palladium–phenanthroline catalyzed carbonylation of nitroarenes to carbamates

Fluorides promote the palladium–phenanthroline catalyzed carbonylation of nitroarenes to carbamates. The effect is more evident on the rate of the reaction at short reaction times, but a positive effect on selectivity is also observed under certain conditions. The effect is observed even under conditions under which chloride inhibits the reaction. Tetraethylammonium is a better countercation than sodium. Copyright © 2007 John Wiley & Sons, Ltd.     

Surface chemical studies of the influence of In and Al on the decomposition of TEG on GaAs(100)

The interaction of triethylgallium (TEG) with the Ga-stabilized GaAs(100) surface in the presence of In and Al has been investigated using AES (Auger electron spectroscopy), HREELS (high resolution electron energy loss spectroscopy) and TDS (thermal desorption spectroscopy) techniques. Al is shown to greatly increase the saturation surface coverage of TEG on the surface and to suppress the desorption of TEG and diethylgallium (DEG). Etching of the surface Al by TEG is observed, resulting in the formation of gas phase Al organic species. Alkyl migration from GA to Al centres occurs, and the presence of Al substantially enhances the irreversible deposition of C. In is found to enhance DEG desorption and to lower the temperature at which absorbed ethyl groups decompose to gas phase ethene. Computer modelling has been carried out to extract kinetic parameters from measured thermal desorption spectra. These parameters are then used to calculate expected partial growth rates of GaAs during the growth of Ga_xAl_1−xAs and Ga_xIn_1−xAs using TEG. The data provide a molecular level understanding of the GaAs pa rtial growth rate variations arising during the deposition of III–V ternary materials.     

Dimensionally and thermally stable polymer,containing disordered graphitic structure and adamantane

In an attempt to develop a low‐k interlayer dielectric, adamantane‐diphenyldiethynyl moiety containing oligomer is prepared. Oligomerization of 1,3,5,7‐tetrakis[3/4‐ethynylphenyl]adamantane ( 4 ) is accomplished by a Glaser–Hay oxidative coupling with 1,3,5‐triethynylbenzene and phenylacetylene end‐capping agent. The CHCl₃ soluble oligomer is then thermally treated by step‐curing at 200, 300, 380, and 450 °C for 30 min at each temperature under nitrogen flow to render a shiny void‐free black polymer. TGA analysis indicates that the polymer is stable under nitrogen up to 500 °C with a marginal decomposition up to 800 °C. Solid‐state ¹³C NMR, Raman scattering, and FTIR are used to characterize the structure of the polymer. The polymer consists of amorphous carbon networks with the adamantane moieties and nanosized graphitic regions (clusters), which are generated from the thermal crosslinking of the diphenyldiethynyl units. It shows a remarkably low linear coefficient of thermal expansion (～25 ppm/°C), presumably due to the presence of the disordered graphitic structure. Its high density (～1.21 g/cm³), refractive index (～1.80 at 632 nm), and Young's modulus (～17.0 GPa) are also consistent with the interpretation. This study reveals important details about the effect of microscopic structure on the macroscopic properties of the highly crosslinked polymer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6909–6925, 2006     

Photochemical expulsion of the neutral monodentate ligand L in Ru(terpy*)(diimine)(L)2+: a dramatic effect of the steric properties of the spectator diimine ligand

A series of photoreactive complexes of the type Ru(terpy*)(N-N)(L)(2+), where terpy* is 4'-(3,5-ditertiobutylphenyl)-2,2':6',2' '-terpyridine, N-N is the bidentate chelate phen or dmp (phen = 1,10-phenanthroline, dmp = 2,9-dimethyl-1,10-phenanthroline), and L is the monodentate ligand dms, MeBN, or MeOBN (dms = dimethyl sulfide, MeBN = 2,6-dimethyl benzonitrile, MeOBN = 2,6-dimethoxybenzonitrile), has been synthesized and fully characterized by proton NMR spectroscopy, electrospray mass spectrometry, and UV-vis spectroscopy. The X-ray structures of four complexes were also obtained. In neat pyridine, the quantum yields for the photosubsitution of L by pyridine were measured and showed dramatic variations depending on the steric interactions between the spectator bidentate ligand and the leaving monodentate ligand L. The use of dmp instead of phen multiplied the photosubstitution efficiency by a factor of 20-50, depending on L. This effect could be qualitatively correlated to the distortions observed in the X-ray structures of the corresponding complexes. The highly distorted structure of Ru(terpy)(dmp)(dms)(PF(6))(2) showed a very high photosubsitution quantum yield phi = 0.36 in neat pyridine. The high photoreactivity of some of the compounds makes them particularly promising as components of future light-driven molecular machines.