Characterization of immobilized catalases and their application in pasteurization of milk with H2O2

The catalase (fromAspergillus niger) has been immobilized by a chemical method on the pous SiO₂ modified with γ-aminopropyltrietoxysilane, followed with glutaraldehyde and by a physical method in alginate and γ-carrageenan gel. Optimum support:enzyme ratios and pH values were determined for modified SiO₂ in a series of immobilization reactions of catalase in the presence of the crosslinking agent glutaraldehyde, and for alginate and γ-carrageenan in the presence of hemoglobin and bovine serum albimine. pH and temperaturedependent activity variations and the stability properties of immobilized catalase preparations were investigated. Rate constants for H₂O₂ decomposition and catalase deactivation were determined. The decomposition rate of H₂O₂ used in the cold pasteurizatioan of milk were investigated in a discontinuous batch type reactor system. Activity half-lives of immobilized catalase were determined.     

Surface properties of Reactive Yellow 2 immobilised pHEMA and HEMA/chitosan membranes: characterisation of their selectivity to different proteins

Poly(hydroxyethyl methacrylate), pHEMA, and a composite pHEMA/chitosan networks were synthesized in the membrane form via UV initiated photo-polymerisation in the presence of an initiator ,′-azoisobutyronitrile. Reactive Yellow 2 (RY-2) was covalently immobilised as a dye–ligand onto both membranes. The polarity and surface energy of the investigated membranes were determined by contact angle measurement. The incorporation of chitosan in the pHEMA networks produced more hydrophilic surface, as indicated by contact angle analysis. The binding characteristics of lysozyme, γ-globulins, human serum albumin (HSA) and bovine serum albumin (BSA) to pHEMA-RY-2 and pHEMA/chitosan-RY-2 affinity membranes have been investigated from aqueous solution and their dye–ligand free forms were used as control systems. When chitosan was incorporated in the pHEMA network as a cationic polymer led to higher adsorption capacity for the lysozyme. Selective adsorption behaviour was also observed in the case of pHEMA/chitosan-RY-2 membrane for the lysozyme. The non-specific adsorptions of the lysozyme on the pHEMA and pHEMA/chitosan membranes were about 1.9 and 7.2 mg/ml, respectively. These were negligible for all others investigated proteins. The lysozyme adsorption data was analysed using the first-order and the second-order models. The first-order equation in both affinity membrane systems is the most appropriate equation to predict the adsorption capacities of the adsorbents. The adsorption isotherms well fitted the combined Langmuir–Freundlich model. A theoretical analysis has been conducted to estimate the thermodynamic contributions (changes in enthalpy, entropy and Gibbs free energy) for the adsorption of lysozyme to both dye–ligand immobilised membranes. The adsorption capacities of both dye–ligand immobilised membranes increased with increasing the temperature while decreased with increasing the NaCl concentration. Both affinity membranes are stable when subjected to sanitization with sodium hydroxide after repeated separation–elution cycles.     

New Copper（Ⅱ） and Nickel（Ⅱ） Complexes of 4-Morpholinoacetophenone Thiosemicarbazone： Structural, Electrochemical and Antimicrobial Studies

4-Morpholinoacetophenone thiosemicarbazone, MAPT, and its nickel（Ⅱ） and copper（Ⅱ） complexes have been prepared and characterized by elemental analysis, magnetic susceptibility, spectral methods （FT-IR, ^1H NMR） and cyclic voltammetry. Electrochemical behaviors of the complexes have been studied by cyclic voltammetry in DMF media showing metal centered reduction processes for both of them. The redox properties, nature of the electrode processes and the stability of the complexes were discussed. [Cu（MAPT）2]Cl2 complex shows Cu（Ⅱ）/Cu（Ⅰ） couple and quasi-reversible wave associated with the Cu（Ⅲ）/Cu（Ⅱ） process. The reduction/oxidation potential values depend on the structures of complexes. Also, the antimicrobial activities of these complexes were determined against S. aureus, E. coli and B. subtilis.     

Production of citric acid using immobilized conidia of Aspergillus niger

Conidia of Aspergillus niger were immobilized in calcium alginate gel for the production of citric acid. First, the type of the preactivation medium, together with the preactivation period, was investigated. It was found that A. niger requires a 2-d preactivation period at a 0.05 g/L NH₄NO₃ concentration. Second, preactivated cells were used to determine the effects of nitrogen concentration and the flow rate of oxygen and air on the production of citric acid. Maximum citric acid production was attained with medium containing 0.01 g/L of NH₄NO₃. The rate of citric acid production in the nitrogenous medium was 33% higher when oxygen was used instead of air during the production phase. This corresponds to an increase of 85% when compared to production when neither oxygen nor air was fed into the system. In the nonnitrogenous medium citric acid concentration remained similar regardless of the use of air or oxygen. However, in the nonnitrogenous production medium, citric acid production was not influenced considerably when oxygen was used instead of air. The advantage of using immobilized cells is that production is achieved easily in the continuous system. Therefore, citric acid production was also tested using a packed-bed bioreactor, and an increase in productivity by a factor of 22 was achieved compared to the batch system.     

Charge carrier mobility,photovoltaic, and electroluminescent properties of anthracene‐based conjugated polymers bearing randomly distributed side chains

This article reports on the synthesis, characterization, and properties of various anthracene‐containing poly (p‐phenylene‐ethynylene)‐alt‐poly(p‐phenylene‐vinylene) (PPE‐PPV) polymers (AnE‐PVs) bearing statistical distributions of various side chains. Primarily, the ratio of linear octyloxy and branched 2‐ethylhexyloxy side chains at the poly(p‐phenylene vinylene) (PPV) parts was varied, leading to the polymers stat, stat1, and stat2. Furthermore, polymers also containing asymmetric substituted PPV and poly(p‐phenylene ethynylene) units (bearing methoxy and 2‐ethylhexyloxy side chains) were prepared yielding stat3, stat4, and stat5. These materials exhibit a broad variation in their photovoltaic properties. It is once more shown that side chains and their distribution can crucially affect the photovoltaic device performance. The introduction of units with asymmetric substitution into these systems seems to be harmful for their utilization in photovoltaic applications. Organic field‐effect transistors were fabricated to investigate hole mobilities in these new materials. Large variance was observed, falling in the range of almost two orders of magnitude, indicating rather different π–π stacking behavior of the polymer backbones owing to side‐chain modifications. Moreover, a selection of the new polymeric systems was investigated regarding their potential for light‐emitting diode (LED) applications. Polymer LEDs using the polymers AnE‐PVstat, ‐stat3, ‐stat4, and ‐stat5, as the active layer showed turn‐on voltage of ～2 V and exhibited red light emission. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Pharmacological properties of dicyanidoaurate(I)-based complexes: characterization and single crystal X-ray analysis

The synthesis of three bimetallic cyanido complexes with edbea [2,2′-(ethylenedioxy)bis(ethylamine)] ligand is reported. [Ni^II(μ-edbea)₂{Au(μ-CN)₂}₂]_n (1), [{Cu^II(edbea)}₂{Au(μ-CN)₂}₄]_n (2) and [Cd^II(edbea)₂][Au(CN)₂]₂·H₂O (3) were fully characterized by elemental, infrared, XRD (3), ESI-MS and thermal analysis. The DNA/BSA binding properties of these complexes were evaluated by spectrophotometric titration, fluorometric ethidium bromide kinetics, and DNA electrophoresis studies and their partially minor groove binding mode between the base pairs of DNA and electrostatic interaction between the amino acid residues of BSA were explained. The complexes were tested for their pharmacological properties. These molecules had excellent in vitro antiproliferative activity and also exhibited a strong tumor inhibiting effect against HT29, HeLa, C6 and Vero cell lines. These complexes had metastatic features as they are able to reduce cell migration activity and suppress tumor growth in vitro. Analysis of the DNA topoisomerase I relaxing activity indicates that the complexes do not inhibit topoisomerase I which regulates the topological states of the DNA double helix during DNA processing reactions. The TUNEL and DNA laddering assay results indicated that these compounds may destroy cell maintenance by triggering apoptosis. Immunohistochemistry staining analysis demonstrated that these complexes significantly decreased the expression of Bcl-2 in HeLa and HT29 cells while increasing the expression of P53 levels. Overall, the potent antiproliferative activity, low cytotoxic effect, good solubility, and micro molar range dosage observed for these complexes emphasizes their potential as anticancer drug candidates.     

89Zr Labeled Fe3O4@TiO2 Nanoparticles: In Vitro Afffinities with Breast and Prostate Cancer Cells

In this study, Fe₃O₄@TiO₂ nanoparticles were synthesized as a new Positron Emission Tomography/Magnetic Resonance Imaging (PET/MRI) hybrid imaging agent and radiolabeled with ⁸⁹Zr. In addition, Fe₃O₄ nanoparticles were synthesized and radiolabeled with ⁸⁹Zr. Df-Bz-NCS was used as bifunctional ligand. The nanoconjugates were characterized with transmission electron microscopy, scanning electron microscopy, and dynamic light scattering. Radiolabeling yields were 100%. Breast and prostate cancer cell affinities and cytotoxicity were determined using in vitro cell culture assays. The results demonstrated that Fe₃O₄@TiO₂ nanoparticles are promising for PET/MR imaging. Finally, unlike Fe₃O₄ nanoparticles, Fe₃O₄@TiO₂ nanoparticles showed a fluorescence spectrum at an excitation wavelength of 250 nm and an emission wavelength of 314 nm. Therefore, in addition to bearing the magnetic properties of Fe₃O₄ nanoparticles, Fe₃O₄@TiO₂ nanoparticles display fluorescence emission. This provides them with photodynamic therapy potential. Therefore multimodal treatment was performed with the combination of PDT and RT by using human prostate cancer cell line (PC3). The development of ⁸⁹Zr-Df-Bz-NCS-Fe₃O₄@TiO₂ nanoparticles as a new multifunctional PET/MRI agent with photodynamic therapy and hyperthermia therapeutic ability would be very useful.     

Synthesis,characterization and biodistribution of 99mTc-Bioquin-HMPAO (99mTc-BH) as a novel brain imaging agent

Recently, the development of novel brain imaging agents has aroused much interest thanks to limited number of brain cancer or diseases diagnosis agents. It is aimed to synthesize a novel brain imaging agent including a promise for further studies on AD diagnosis potential and investigate its bioaffinity with biodistribution studies on healthy Balb/c mice. A novel radiolabeled agent was synthesized and characterized. Quality control of ^99mTc-BH was performed utilizing solvent extraction and chromatographic (Radio TLC and Radio HPLC) methods. Bioaffinity of the ^99mTc-BH was investigated on male Balb/c mice at various time points (5, 30, 60, 120 min post-injection). Paper electrophoresis showed that ^99mTc-BH has a neutral structure. Radiochemical purity of ^99mTc-BH was over 95 % with appropriate stability for imaging period. Selected brain regions have uptakes over 4 % ID/g following intravenous injection. Hippocampus has uptake approximately 10 % ID/g. ^99mTc-BH has shown brain uptake, so it may prove to be valuable for brain imaging as a novel technetium-labeled agent. Further investigations with AD animal model are our on going effort to show that this agent has AD diagnosis potential.     

Preparation of a 99mTc-labeled graft polymer and its in vitro and in vivo evaluation

Journal of Radioanalytical and Nuclear Chemistry - The aim of this study is the synthesis of a novel 99mTc-labeld graft polymer and the biological evaluation of its in vitro and in vivo properties....