An Efficient Method for the Synthesis of 3-Cyano-6-hydroxy-2(1H)-pyridinones under Microwave Irradiation and Solvent-free Conditions

Summary. Three component condensation of alkylacetoacetates, primary amines, and alkyl cyanoacetates catalyzed by solid supports under microwave irradiation gave N-alkyl 3-cyano-6-hydroxy-2(1H)-pyridinones with high yields. Upon carrying out the reaction under the same condition on acidic alumina, zeolite HY, silica gel, and montmorillonite K-10, the best yields were achieved by silica gel. Corresponding author. E-mail: balalaie@yahoo.com Received August 28, 2002; accepted September 3, 2002     

Fabrication and Determination of Refractive Index Profile of the Planar Waveguides by Wedge Technique

Several planar waveguides have been fabricated. The waveguides have been polished for determination of their refractiveindex profiles (RIP) by wedge method. The RIP determined by inserting the sample in a Mach-Zehnder interferometer andapplying fringe analysis methods.     

E-Beam—a new transfer system for isolator technology

In every aseptic filling application, the sterile transfer of goods into the aseptic area is a challenge, and there are many different ways to do it.

With isolator technology a higher sterility assurance level (SAL) is achieved. This SAL is only as good as the weakest segment in the chain of manufacturing. The transfer of goods into and out of the isolator is one of these critical segments.

Today different techniques, some already well established, others still very new, are available on the market like: dry heat tunnel, autoclave, pulsed light, rapid transfer systems (RTP), H₂O₂ tunnel, UV light, etc. all these systems are either not applicable for continuous transfer, only good for heat-compatible materials like glass, or do not guarantee a 6 log spore reduction.

E-Beam opens new perspectives in this field. With E-beam technology it is possible to transfer heat-sensitive (plastic), pre-sterilised materials at high speed, continuously into an aseptic area.

E-Beam unifies three different technologies, that result in a very efficient and high-speed decontamination machine designed for the pharmaceutical industry. First, there is the electron beam that decontaminates the goods and an accurate shielding that protects the surrounding from this beam. Second, there is the conveyor system that guarantees the output and the correct exposure time underneath the beam. And third, there is the isolator interface to provide correct differential pressure and clean air inside the tunnel as well as the decontamination of the tunnel with H₂O₂ prior to production.

The E-beam is a low-energy electron beam, capable of decontaminating any kind of surface. It penetrates only a few micrometers into the material and therefore does not deform the packaging media.

Currently, machines are being built to transfer pre-sterilised syringes, packed in plastic tubs with a Tyvek cover into an aseptic filling isolator with the following data: decontamination efficiency of 10⁶ (6 log spore reduction), decontamination speed of 6 tubs (600 syringes) per minute.

This is just one of many applications for this new technology.     

The electrocatalytic examination of cephalosporins at carbon paste electrode modified with CoSalophen

The electrocatalytic oxidation of cephalexin and cefazolin has been studied at a carbon paste electrode modified with cobalt salophen (CoSal) by cyclic voltammetry. The selectivity of the carbon paste modified with CoSal in detecting cephalexin and cefazolin was examined. To suggest the electrocatalytic mechanism for electro-oxidation of cefazolin, the electrochemical behavior of ceftriaxone was investigated which has a thiol group out of the beta lactam ring. The electrocatalytic oxidation of these antibiotics is shown to be irreversible at the CoSal modified electrode. Scan rate dependence of cefazolin, which is a sulfur-containing compound, has been examined. The results indicated that the electrocatalytic oxidation of the compounds is diffusion controlled. The responses of the modified electrode were compared with those of unmodified electrode and it has shown that the modified electrode has better sensitivity than unmodified electrode to the detection of cefazolin. The overall number of electrons contributed to the oxidation of cefazolin is obtained 1 by chronoamperometry; the number of electron involved in the rate-determining step was 1. The results of differential pulse voltammetry (DPV) using the modified electrode with high sensitivity were applied for the determination of cefazolin in human synthetic serum samples. The linear range was obtained from 1 × 10⁻⁵ to 1 × 10⁻³ M for DPV determination of cefazolin in buffered solutions (pH 3.0).     

LMI-Based Delayed Output Feedback Controller Design for a Class of Fractional-Order Neutral-Type Delay Systems Using Guaranteed Cost Control Approach

In this research work, we deal with the stabilization of uncertain fractional-order neutral systems with delayed input. To tackle this problem, the guaranteed cost control method is considered. The purpose is to design a proportional–differential output feedback controller to obtain a satisfactory performance. The stability of the overall system is described in terms of matrix inequalities, and the corresponding analysis is performed in the perspective of Lyapunov’s theory. Two application examples verify the analytic findings.     

A Novel Non-enzymatic Selective and Sensitive Glucose Sensor Based on Nickel-Copper Oxide@3D-rGO/MWCNTs

In this work, a modified 3D-rGO/MWCNT with nickel and copper oxide nanoparticles were synthesized. The structural properties of this nanocomposite were investigated by several techniques. The fabricated sensor at optimum condition potential of +0.60 V (vs. Ag/AgCl) and a rotational rate of 1800 rpm gave a detection limit of 0.04 μmol L⁻¹ with two dynamic ranges of 0.10–300 and 300–900 μmol L⁻¹ glucose with high stability. The good accuracy of the fabricated sensor was proved in the determination of glucose in a blood sample (with recoveries between 95 % to 105 % and RSDs of 1.2 to 2.5 %).     

Green and one‐pot surface coating of iron oxide magnetic nanoparticles with natural amino acids and biocompatibility investigation

We report the synthesis of iron oxide magnetic nanoparticles (IONPs) coated with various natural amino acids (AAs) using a one‐pot reaction in an aqueous medium. Several AAs, which contained hydrophilic and hydrophobic groups, were selected to study their effects on size, morphology and toxicity of IONPs. Functionalized IONPs were characterized using X‐ray diffraction, differential scanning calorimetry, thermogravimetric analysis, Fourier transform infrared spectroscopy, and scanning and transmission electron microscopies. Furthermore, vibrating sample magnetometry analysis shows these nanoparticles have excellent magnetic properties. Cellular toxicity of IONPs was also investigated on HFF2 cell lines. The AA‐coated IONPs are non‐toxic and biocompatible. Natural AA‐coated IONPs show a potential for their development in in vitro and in vivo biomedical fields due to their non‐toxicity, good ζ‐potential and related small size and narrow size distribution.     

Blue TiO2 nanotube arrays as semimetallic materials with enhanced photoelectrochemical activity towards water splitting

In the past years there has been a great interest in self-doped TiO₂ nanotubes (blue TiO₂ nanotubes) compared to undoped ones owing to their high carrier density and conductivity. In this study, blue TiO₂ nanotubes are investigated as photoanode materials for photoelectrochemical water splitting. Blue TiO₂ nanotubes were fabricated with enhanced photoresponse behavior through electrochemical cathodic polarization on undoped and annealed TiO₂ nanotubes. The annealing temperature of undoped TiO₂ nanotubes was tuned before cathodic polarization, revealing that annealing at 500 °C improved the photoresponse of the nanotubes significantly. Further optimization of the blue TiO₂ nanotubes was achieved by adjusting the cathodic polarization parameters. Blue TiO₂ nanotubes obtained at the potential of –1.4 V (vs. SCE) with a duration of 10 min exhibited twice more photocurrent response (0.39 mA cm^-2) compared to the undoped TiO₂ nanotube arrays (0.19 mA cm^-2). Oxygen vacancies formed through the cathodic polarization decreased charge recombination and enhanced charge transfer rate; therefore, a high photoelectrochemical activity under visible light irradiation could be achieved.