高压增氧T′相R_2CuO_(4+δ)(R=Nd～Tm)低温磁性研究

T′相R2CuO4稀土铜氧化合物由于尺度效应而产生弱铁磁性行为已经被人们关注,报导了通过高温高氧压(6GPa,1000℃)合成稀土T′相R2CuO4(R=Nd,Sm,Eu,Gd,Tb,Dy,Ho,Er和Tm)化合物的结构和磁学性能。磁化率曲线显示,在低温下所有的高压增氧R2CuO4样品都出现新的低温弱铁磁性反常行为,转变温度在28K附近。新的低温弱铁磁性行为是由于CuO2面上微量氧空穴的掺入,使处于反铁磁有序CuO2面形成局域化的铁磁性团簇造成。实验证明新发现的低温弱铁磁性行为与尺度效应产生弱铁磁性行为属于完全不同的物理机制。结果还预示T′相R2CuO4稀土铜氧化合物很难通过空穴掺杂而实现超导。     

Photoluminescence characteristics of ZnTiO3: Bi nanocrystals

The photoluminescence properties of the Bi³⁺ in sol-gel derived ZnTiO₃ nanocrystals have been investigated. An ultra-violet emission at 360 nm and a visible emission band at 506 nm have been observed, originating from two kinds of emission centers. The former is ascribed to the ³P₁-¹S₀ transition of Bi³⁺ and the latter to the recombination of the electrons with the photo-generated holes trapped in the zinc vacancies. In all cases the latter contribution is predominant.     

On the deformation and fracture of porous materials

The constitutive behavior of porous materials (including the yield loci, the void growth rate, the macro stress-strain relation and the strain to localization instability) is examined based on the lower bound approach proposed by the present authors. These results are then compared with the experimental and the finite element results as well as those predicted by Gurson's equations. Emphasis is placed on approaching the real behavior from the upper and the lower bound analysis. Calculation is also made on the influence of void nucleation on the critical strain to instability and a modified strain-controlled nucleation criterion is proposed. Finally the instability and fracture of AISI4340 steel in plane strain tension is examined and comparison is made between theoretical and experimental results.     

An amino acid based system for CO2 capture and catalytic utilization to produce formates

Herein, we report a novel amino acid based reaction system for CO₂ capture and utilization (CCU) to produce formates in the presence of the naturally occurring amino acid l-lysine. Utilizing a specific ruthenium-based catalyst system, hydrogenation of absorbed carbon dioxide occurs with high activity and excellent productivity. Noteworthy, following the CCU concept, CO₂ can be captured from ambient air in the form of carbamates and converted directly to formates in one-pot (TON > 50 000). This protocol opens new potential for transforming captured CO₂ from ambient air to C1-related products.

A novel amino acid based reaction system for CO₂ capture and utilization (CCU) to produce formates is presented applying a ruthenium-based catalyst. Noteworthy, CO₂ can be captured from ambient air and converted to formates in one-pot (TON > 50 000).     

免跟踪透射式太阳聚光器的设计

针对目前太阳聚光器中因为自动跟踪系统故障率高导致使用成本大幅度增加的主要制约因素,在多年来探讨有效提高太阳能密度的基础上,提出了免跟踪线性菲涅尔透射式太阳聚光器设计的新思路,并对其结构形式和工作原理进行了阐述.     

影响石英单模光纤数值孔径测量的因素及分析

本文采用远场光斑法和光强法测量了石英单模光纤的数值孔径.实验结果表明,由光纤耦合条件不同导致的光斑形状变化,对数值孔径的测量影响不大,单模光纤的纤芯直径小,导致出射光存在较强的衍射现象,对数值孔径的测量造成较大的影响,无论采用光斑法还是光强法,需以衍射第1次极大为计算标准,尽量选择光斑中心为亮斑时测量其数值孔径.此外,...     

脉冲氧碘化学激光器的动力学模拟研究

根据氧碘化学激光器的反应机理建立了一维预混脉冲出光理论模型,从理论上研究了碘原子密度、单重态氧密度及产率、其他组分密度和光学参量(输出耦合率、增益长度等)对单脉冲能量及脉宽的影响.分析了影响单脉冲能量和激光脉宽的内部动力学过程.讨论了出光过程中增益开关效应.计算的结果为优化脉冲氧碘化学激光器提供了理论依据.     

Ammonia-treatment assisted fully encapsulation of Fe2O3 nanoparticles in mesoporous carbons as stable anodes for lithium ion batteries

To improve the initial coulombic efficiency and bulk density of ordered mesoporous carbons, active Fe2O3 nanoparticles were introduced into tubular mesopore channels of CMK-5 carbon, which possesses high specific surface area (>1700 m 2 g-1 ) and large pore volume (>1.8 cm 3 g-1 ). Fine Fe2O3 nanoparticles with sizes in the range of 5 7 nm were highly and homogenously encapsulated into CMK-5 matrix through ammonia-treatment and subsequent pyrolysis method. The Fe2O3 loading was carefully tailored and designed to warrant a high Fe2O3 content and adequate buffer space for improving the electrochemical performance. In particular, such Fe2O3 and mesoporous carbon composite with 47 wt% loading exhibits a considerably stable cycle performance (683 mAh g-1 after 100 cycles, 99% capacity retention against that of the second cycle) as well as good rate capability. The fabrication strategy can effectively solve the drawback of single material, and achieve a high-performance lithium electrode material.