Controlled synthesis of amphiphilic biodegradable polylactide‐grafted dextran copolymers

The whole controlled synthesis of novel amphiphilic polylactide (PLA)‐grafted dextran copolymers was achieved. The control of the architecture of such biodegradable and potentially biocompatible copolymers has required a three‐step synthesis based on the “grafting from” concept. The first step consisted of the partial silylation of the dextran hydroxyl groups. This protection step was followed by the ring‐opening polymerization of D ,L ‐lactide initiated from the remaining OH functions of the partially silylated polysaccharide. The third step involved the silylether group deprotection under very mild conditions. Based on previous studies, in which the control of the first step was achieved, this study is focused on the last two steps. Experimental conditions were investigated to ensure a controlled polymerization of D ,L ‐lactide, in terms of grafting efficiency, graft length, and transesterification limitation. After polymerization, the final step was studied in order to avoid degradation of both polysaccharide backbone and polyester grafts. The chemical stability of dextran backbone was checked throughout each step of the synthesis. PLA‐grafted dextrans and PLA‐grafted (silylated dextrans) were proved to adopt a core‐shell conformation in various solvents. Furthermore, preliminary experiments on the potential use of these amphiphilic grafted copolymers as liquid/liquid interface stabilizers were performed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2577–2588, 2004     

Vehicle and personnel routing optimization in the service sector: application to water distribution and treatment

We present an overview of the author’s Ph.D. thesis, supervised by P. Dejax and N. Bostel, which was defended in February 2006 at école des Mines de Nantes, France. The thesis is written in French, and is available at . It was conducted in the context of a research contract with a water distribution company. In a first section, we define multiperiod routing problems for service technicians. In a second section, we present some heuristics and a memetic algorithm used to solve these problems. The third section introduces optimal and near-optimal approaches based on column generation. Finally, we present some applications to the real-life case. The methods presented in Sects. 2, 3 and 4 were tested over several sets of problems, based on real-life statistics provided by the company.      

Comprehensive study on the formation of polyelectrolyte complexes from (quaternized) poly[2‐(dimethylamino)ethyl methacrylate] and poly(2‐acrylamido‐2‐methylpropane sodium sulfonate)

Polyelectrolyte complexes (PECs) have been prepared from well‐defined (quaternized) poly[2‐(dimethylamino)ethyl methacrylate] (PDMAEMA) and high molecular weight poly(2‐acrylamido‐2‐methylpropane sodium sulfonate) (PAMPSNa) after a thorough study of their viscometric properties. The effect of pH and quaternization degree of PDMAEMA on PECs stoichiometry has been examined. PEC‐based materials have been characterized in terms of thermal stability, equilibrium swelling degree, and free/bound water composition. The stoichiometry and swellability of the physically crosslinked hydrogels obtained from fully quaternized PDMAEMA/PAMPSNa complexes do not depend on pH. In contrast, PECs made of non quaternized PDMAEMA and PAMPSNa are highly affected by pH, and could reversibly disintegrate at pH ≥ 9. Partially quaternized PDMAEMA/PAMPSNa PECs exhibit intermediate properties and form stable loose structures in the whole investigated pH range. Finally, stable dispersions of PECs nanoparticles have been successfully produced from dilute solutions of the complementary polyelectrolytes. The nanoparticle average diameter as determined by dynamic light scattering proved to depend on the molar fraction of DMAEMA‐based subunits and on the initial polyelectrolyte concentration. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5468–5479, 2006     

Structural characterisation of a sol-gel copolymer synthesised from aliphatic and aromatic alkoxysilanes using 29Si-NMR spectroscopy

A hybrid organic-inorganic material was prepared from the hydrolytic co-condensation of 3-trimethoxysilylpropylmethacrylate (MAPTMS) and diphenyldiethoxysilane (DPHDES). The synthesis was performed in three steps: (1) MAPTMS pre-hydrolysis, (2) addition of DPHDES, and (3) further hydrolysis of the obtained mixture. ²⁹Si nuclear magnetic resonance spectroscopy was used to characterise the structural evolution of the mineral network during the synthesis. It revealed the catalytic effect of DPHDES on the condensation reaction of silanol groups, initially observed for pre-hydrolysed MAPTMS. In addition, it was clearly demonstrated that the formation of the highest condensed species of the aromatic oligomers (D₂ species) occurred only in the presence of aliphatic oligomers, which decrease the sterical hindrance about the silicon nuclei.     

Simple and rapid enzymatic assay of ornithine decarboxylase activity

Since the induction of putrescine synthesis by ornithine decarboxylase (ODC) is observed in many pathological and physiological processes, a useful and simple method to assay this enzyme activity should be an interesting tool to quantify the biological importance of its induction. An enzymatic method to assay ODC is reported here. This method is based on the reaction between putrescine and soya diamine oxidase. The reaction releases H(2)O(2), which is measured by a colorimetric method. The validation of this method showed good accuracy (98+/-5% of recovery). High precision and reproducibility were obtained. A linearity with a correlation coefficient of 0.999 in the range of 2.5-25 nmol was obtained. This method is also rugged and specific. The application of the assay of ODC activity showed that it is useful as a rapid and simple tool for assaying ODC activity in vitro. Comparison with the HPLC determination of ODC activity shows strong correlation along with the high accuracy of the two methods.     

One-dimensional quantum description of the bending vibrations of HCN/CNH for high values of the total angular momentum

For high values of the quantum number of the total angular momentum J (up to J = 20), quantum mechanical eigenstates (eigenvalues and eigenfunctions) are calculated by the method of Gatti et al. (J. Mol. Spectrosc. 181 (1997) 403) for the bending deformations of HCN and CNH. In particular, we have examined the l-type resonances in highly excited rovibrational states within the framework of a one-dimensional model, i.e. along the reaction pathway for the isomerization reaction HCN/CNH. The potential energy surface used is that of Bowman et al. (J. Chem. Phys. 99 (1993) 308).     

Reaction de metathese des olefines induite photochimiquement en presence d'un complexe de metal de transition : V. Intervention d'un complexe dinucleaire du tungstene

The photoinduced metathesis [W(CO)₆CCl₄hν] of cis- and trans-RCH=CHMe gives 2-butene in a very high trans but low cis stereoselectivity. Propene behaves like a cis olefin. These results are consistent with the proposal of a dinuclear tungsten intermediate, which requires high steric constraints in the transalkylidenation step.