一类多维指数分布的参数估计

考虑生存函数为(F)(x1,x2,…,xn)=P{X1＞x1,…,Xn＞xn}=exp{-[n∑i=1(xi/θi)1/δ]δ}(0＜xi＜∞,0＜δ≤ 1,0＜θi＜∞,i=(1,n))的一类多维指数分布,给出了它的密度函数的表示式,并讨论了它的性质.提出了相关参数δ的估计(^δ),证明了(^δ)有相合性和渐近正态性,得到了(^δ)的渐近方差σ2δ.最后还给出了若干随机模拟的结果.     

The anion sequence in the phase transformation of mesostructures templated by non-ionic block copolymers

A p6m to Ia3d mesophase evolution is achieved by simply adjusting the acidity and/or anion species in the presence of block copolymers; the unusual anion sequence that affects the phase behavior of block copolymer templated mesostructured solids is revealed to be SO(4)(2-)(HSO(4)(-)) > NO(3)(-) > Br(-) > Cl(-).     

一类酶反应底物的光化学荧光研究

研究了对位取代酚类酶反应底物的光化学荧光反应机理，指出光子不仅可以取代过氧化物酶，而且可以取代氧化剂（Ｈ_２Ｏ_２）。用于测定多种酶反应底物，结果满意。     

硫酸颜色反应用于荧光法测定利血平研究

提出了硫酸颜色反应用于利血平的荧光分析新方法。利用血平与浓硫酸反应，生成强荧光物质，所得产物的荧光强度与利血平的浓度在０－０．６μｇ／ｍＬ范围内有良好的线性关系。检测限为０．２ｎｇ／ｍＬ。本法可直接用于尿液中利血平的定量分析，回收率为８２．５％－８４．２％。     

A New Plate for Planar Electrochromatography

JPC – Journal of Planar Chromatography – Modern TLC - A new bonded RP-18 sintered silica gel plate for use in reversed-phase planar electrochromatography has been prepared in our...     

Understanding effect of wall structure on the hydrothermal stability of mesostructured silica SBA-15

Mesostructured silica SBA-15 materials with different structural parameters, such as pore size, pore volume, and wall thickness, etc., were prepared by varying the postsynthesis hydrothermal treatment temperature and adding inorganic salts. The hydrothermal stabilities of these materials in steam (100% water vapor) were systematically investigated using a variety of techniques including powder X-ray diffraction, transmission electron microscopy, nitrogen sorption, and (29)Si solid-state NMR. The effect of the pore size, microporosity or mesoporosity, and wall thickness on the stability was discussed. The results show that all of the SBA-15 materials have a good hydrothermal stability under steam of 600 degrees C for at least 24 h. N(2) sorption measurements show that the Brumauer-Emmett-Teller surface area of SBA-15 materials is decreased by about 62% after treatment under steam at 600 degrees C for 24 h. The materials with thicker walls and more micropores show relatively better hydrothermal stability in steam of 600 degrees C. Interestingly, we found that the microporosity of the mesostructured silica SBA-15 is a very important factor for the hydrothermal stability. To the materials with more micropores, the recombination of Si-O-Si bonds during the high-temperature steam treatment may not cause direct destruction to the wall structure. As a result, SBA-15 materials with more micropores show better stability in pure steam of 600 degrees C. Nevertheless, these materials are easily destroyed in steam of 800 degrees C for 6 h. Two methods to effectively improve the hydrothermal stability are introduced here: one is a high-temperature treatment, and another is a carbon-propping thermal treatment. Thermal treatment at 900 degrees C can enhance the polymerization degree of Si-O-Si bonds and effectively improve the hydrothermal stability of these SBA-15 materials in 800 degrees C steam for 12 h. But, this approach will cause very serious shrinkage of the mesopores, resulting in smaller pore diameter and low surface area. A carbon-propping thermal treating method was employed to enhance the polymerization of Si-O-Si bonds and minimize the serious shrinkage of mesopores at the same time. It was demonstrated to be an effective method that can greatly improve the hydrothermal stability of SBA-15 materials in 800 degrees C steam for 12 h. Furthermore, the SBA-15 materials obtained by using the carbon-propping method possess larger pores and higher surface area after the steam treatment at 800 degrees C compared to the materials from the direct thermal treatment method after the steam treatment.     

铁铝复合柱撑粘土的制备、柱结构和稳定性(I)

用两种方法合成了一系列不同Fe/Al比的铁铝复合柱撑牯土(FeAl-PlLC). 用~(27)Al-NMR、UV、ESR等手段考察了柱溶液的结构和状态, 用XRD、DTA、UV-DRS 等技术对其结构、稳定性进行了研究. 结果表明, 铁铝柱撑粘土的底面间距为1.98～1.55 nm, Fe/Al比对其柱结构、比表面积、热稳定性均有较大影响. Fe/Al<0.5时, 层间柱主要呈现Keggin结构, Fe/Al≥0.5时, 可能为三聚结构. 随Fc/Al比的增加, d(001)值, 比表面面、热稳定性逐渐下降.     

(NH_4)_2SiF_6预处理改善SBA-15介孔材料的水热稳定性

(NH4)2SiF6 预处理可对 SBA-15 介孔材料的表面缺陷进行补硅修正以及表面疏水化, 从而明显改善 SBA-15 材料的水热稳定性. 结果表明, 用摩尔分数为 5% 的 (NH4)2SiF6 水溶液, 按引入 1% 的 SiO2 计量对 SBA-15 进行处理后, 其水热稳定性明显改善, 在 100 ?C 沸水中处理 14 d, 或在 800 ?C 下用 100% 水蒸气处理 12 h 后, 均保持较好的介观有序度、形貌及六方孔道结构, 比表面积分别高达 310 和 213 m2/g, 但 (NH4)2SiF6 处理量过高, SBA-15 水热稳定性反而下降.