Comprehensive study on the formation of polyelectrolyte complexes from (quaternized) poly[2‐(dimethylamino)ethyl methacrylate] and poly(2‐acrylamido‐2‐methylpropane sodium sulfonate)

Polyelectrolyte complexes (PECs) have been prepared from well‐defined (quaternized) poly[2‐(dimethylamino)ethyl methacrylate] (PDMAEMA) and high molecular weight poly(2‐acrylamido‐2‐methylpropane sodium sulfonate) (PAMPSNa) after a thorough study of their viscometric properties. The effect of pH and quaternization degree of PDMAEMA on PECs stoichiometry has been examined. PEC‐based materials have been characterized in terms of thermal stability, equilibrium swelling degree, and free/bound water composition. The stoichiometry and swellability of the physically crosslinked hydrogels obtained from fully quaternized PDMAEMA/PAMPSNa complexes do not depend on pH. In contrast, PECs made of non quaternized PDMAEMA and PAMPSNa are highly affected by pH, and could reversibly disintegrate at pH ≥ 9. Partially quaternized PDMAEMA/PAMPSNa PECs exhibit intermediate properties and form stable loose structures in the whole investigated pH range. Finally, stable dispersions of PECs nanoparticles have been successfully produced from dilute solutions of the complementary polyelectrolytes. The nanoparticle average diameter as determined by dynamic light scattering proved to depend on the molar fraction of DMAEMA‐based subunits and on the initial polyelectrolyte concentration. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5468–5479, 2006     

Novel polyelectrolyte complexes between N-carboxyethylchitosan and synthetic polyelectrolytes

Novel polyelectrolyte complexes (PEC) between the polyampholyte N-carboxyethylchitosan (CECh) and polyacid or polybase have been prepared. The complex formation between CECh and poly(2-acryloylamido-2-methylpropanesulfonic acid) (PAMPS), poly(acrylic acid) (PAA) or poly(ethylene imine) (PEI) has been studied. The complex CECh/PAMPS is formed in the pH range from 1.2 to 6.0. The complex CECh/PAA is formed in the range 4.8-6.0 and CECh/PEI—from pH 5.4 to 7.0. The stoichiometry of the complexes depends on the pH value of the medium. In case of CECh/PAMPS and CECh/PAA the maximum quantity of complex is formed in excess of CECh and in the case of CECh/PEI—in excess of PEI. It has been shown that PEC formation between CECh and PAMPS improves the haemocompatibility of CECh.     

The influence of heating on the spectral characteristics of pure alkali halide NaCl crystals

The influence of high-temperature heating on the spectral characteristics of pure natural NaCl crystals is studied. It is shown that defects changing spectral characteristics of crystals are formed in them when heated. Temperature dependences of the luminescence intensity growth for these defects are described by the hyperbolic function. The action of X-rays on heated crystals results in the formation of new defects luminescent in regions of 435 and 570–585 nm. The efficiency of formation of these defects is obtained as a function of the temperature of heat pretreatment. Regularities in variations of the location and the intensity of luminescence of the defects obtained under the action of ultraviolet radiation and on long storage are determined.     

Non-isothermal kinetics of thermal degradation of chitin

Thermogravimetric studies of chitin in air atmosphere were carried out at six rates of linear increase of the temperature. The kinetics and mechanism of the thermal decomposition reaction were evaluated from the TG data by iso-conversional calculation procedure of Kissinger–Akahira–Sunose recommended from ICTAC kinetics committee, as well as 27 mechanism functions. The comparison of the results obtained showed that they strongly depend on the selection of proper mechanism function for the process. Therefore, it is very important to determine the most probable mechanism function. In this respect, the iso-conversion calculation procedure turned out to be the most appropriate one. In the present work, the values of the apparent activation energy E, pre-exponential factor A in Arrhenius equation, as well as the changes of entropy ΔS ^≠, enthalpy ΔH ^≠, and Gibbs free energy ΔG ^≠ for the formation of the activated complex from the reagent are calculated. All the calculations were performed using programs compiled by ourselves.     

Polyelectrolyte complexes based on (quaternized) poly[(2-dimethylamino)ethyl methacrylate]: behavior in contact with blood

Polyelectrolyte complexes (PECs) between (quaternized) poly[2-(dimethylamino)ethyl methacrylate] (PDMAEMA) and (crosslinked) N-carboxyethylchitosan (CECh) or poly(2-acrylamido-2-methylpropane sodium sulfonate) (PAMPSNa) were prepared and characterized in terms of their stability, equilibrium water content, and surface morphology. The evaluation of the behavior of the studied PECs in contact with blood revealed that the (crosslinked) CECh/(quaternized) PDMAEMA complexes had lost the inherent PDMAEMA cytotoxicity but still preserved haemostatic activity. In contrast, the complex formation between (quaternized) PDMAEMA and PAMPSNa allowed the preparation of materials with improved blood compatibility.     

Preparation of Well‐Defined Poly[(ethylene oxide)‐block‐(sodium 2‐acrylamido‐2‐methyl‐1‐propane sulfonate)] Diblock Copolymers by Water‐Based Atom Transfer Radical Polymerization

Summary: Well‐defined poly[(ethylene oxide)‐block‐(sodium 2‐acrylamido‐2‐methyl‐1‐propane sulfonate)] diblock copolymers [P(EO_m‐b‐AMPS_n)], have been obtained by water‐based ATRP using α‐methoxy‐ω‐(2‐methylbromoisobutyrate) poly(ethylene oxide)s (MeO‐P[EO]_m‐BrⁱB with m ranging from 12 to 113) and CuBr · 2Bpy (Bpy for 2,2′‐bipyridyl) as macroinitiator and catalytic complex, respectively. Compared to direct polymerization in water, it has been demonstrated that the water/methanol (3:1, v/v) mixture is better suited for predicting the final number‐average molar mass from the initial monomer‐to‐macroinitiator molar ratio and achieving a quite narrow polydispersity, even at high monomer conversion ( ≈ 1.4 at 80% conversion). The effect of temperature, solvent mixture composition and addition of NaCl salt on the polymerization rate and extent of control over the copolymer molecular parameters have been highlighted as well.

     

Electrospun chitosan-coated fibers of poly(L-lactide) and poly(L-lactide)/poly(ethylene glycol): preparation and characterization

Fibrous poly(L-lactide) (PLLA) and bicomponent PLLA/poly(ethylene glycol) mats were prepared by electrospinning and then were coated with chitosan. The presence of chitosan coating was proved by scanning electron microscopy and by fluorescence microscopy. On contact with blood, the chitosan coating led to changes in erythrocyte shape and in their aggregation. The haemostatic activity of the mats increased with increasing chitosan content. Microbiological studies against Staphylococcus aureus revealed that the chitosan coating imparts antibacterial activity to the hybrid mats. The combined haemostatic and antibacterial activities render these novel materials suitable for wound-healing applications.     

Novel electrospun poly(ε-caprolactone)-based bicomponent nanofibers possessing surface enriched in tertiary amino groups

For the first time preparation of electrospun poly(ε-caprolactone) (PCL) based nanofibers possessing surface enriched in tertiary amino groups is shown. For that purpose the pair PCL and poly(ε-caprolactone)-b-poly[(2-dimethylamino)ethyl methacrylate] (PCL-b-PDMAEMA) diblock copolymers was used. PCL-b-PDMAEMA copolymers were synthesized using a combination of ring-opening polymerization and atom transfer radical polymerization (ATRP). Nanofibers with mean diameters ranging from 400 to 800 nm were obtained. Their morphology was evaluated by scanning electron (SEM) and atomic force microscopy (AFM). It was found that the morphology of the fibers depended on the weight ratio between the partners and the length of the PDMAEMA-block in the copolymers. The enrichment of the fiber surface in tertiary amino groups was studied by X-ray photoelectron spectroscopy (XPS). Increasing the copolymer content and the length of the PDMAEMA-block led to increase of the amount of tertiary amino groups on the fiber surface. The AFM analyses of the mechanical properties of the fiber surface showed that increasing the copolymer content led to decrease of the surface stiffness. The increase of the copolymer content led also to decrease of the melting temperature and the crystallinity degree in respect to PCL from the (co)polymer as determined by differential scanning calorimetry.