The Two-Body Interaction with a Circle in Time

We complete our previous^{(1, 2)} demonstration that there is a family of new solutions to the photon and Dirac equations using spatial and temporal circles and four-vector behaviour of the Dirac bispinor. We analyse one solution for a bound state, which is equivalent to the attractive two-body interaction between a charged point particle and a second, which remains at rest. We show this yields energy and angular momentum eigenvalues that are identical to those found by the usual method of solving of the Dirac equation,⁽⁴⁾ including fine structure. We complete our previous derivation⁽²⁾ of QED from a set of rules for the two-body interaction and generalise these. We show that QED may be decomposed into a two-body interaction at every point in spacetime.     

Mössbauer and infrared spectroscopic studies of novel mixed valence states in cobaltous ferrocyanides and ferricyanides

Novel mixed valence states have been obtained by the treatment of cobaltous ferrocyanides (Co⁺²Fe^II) and ferricyanides (Co⁺²Fe^III) in an ozone flow. The CN stretching bands occur at 2085 cm^–1 for Co⁺²Fe^II and at 2160 cm^–1 for Co⁺²Fe^III. After the ozonization process of Co⁺²Fe^II, an intense band approximately at 2125 cm^–1 is detected. This intermediate band must correspond to a mixed valence state of the type: Fe^II–CN–Co²⁺–NC–Fe^III Mössbauer spectra recorded in situ during the ozonization of Co⁺²Fe^II show the presence of two components: a doublet with isomer shift and quadrupole splitting values close to the cobalti ferricyanide and a very broad line for the mixed valence state. From the Mössbauer and infrared spectra of the aged samples of the Co⁺²Fe^II after ozonization, a relaxation process to the initial state of the samples is observed but the mixed valence state is stable.     

Diffusion coefficient measurement in a microfluidic analyzer using dual-beam microscale-refractive index gradient detection. Application to on-chip molecular size determination

We report a microchip-based detection scheme to determine the diffusion coefficient and molecular mass (to the extent correlated to molecular size) of analytes of interest. The device works by simultaneously measuring the refractive index gradient (RIG) between adjacent laminar flows at two different positions along a microchannel. The device, referred to as a microscale molecular mass sensor (micro-MMS), takes advantage of laminar flow conditions where the mixing of two streams occurs essentially by diffusion across the boundary between the two streams. Two flows merge on the microchip, one containing solvent only, referred to as the mobile phase stream and one which contains the analyte(s) of interest in the solvent, i.e. the sample stream. As these two streams merge and flow parallel to each other down the microchannel a RIG is created by the concentration gradient. The RIG is further influenced by analyte diffusion from the sample stream into the mobile phase stream. Measuring the RIG at a position close to the merging point (upstream signal) and simultaneously a selected distance further down the microchannel (downstream signal) provides real-time data related to the extent a given analyte has diffused, which can be readily correlated to analyte molecular mass by taking the ratio of the downstream-to-upstream signals. For the dual-beam RIG measurements, a diode laser output is coupled to a single mode fiber optic splitter with two output fibers. Light from each fiber passes through a graded refractive index (GRIN) lens forming a collimated beam that then passes through the microchannel and then on to a position sensitive detector (PSD). The RIG at both detection positions deflects the two collimated probe beams. The deflection angle of each beam is then measured on two separate PSDs. The micro-MMS was evaluated using polyethylene glycols (PEGs), sugars, and as a detector for size-exclusion chromatography (SEC). Peak purity can be readily identified using the micro-MMS with SEC. The limit of detection was 0.9 ppm (PEG at 11 840 g/mol) at the upstream detection position corresponding to a RI limit of detection (LOD) (3sigma) of 7-10(-8) RI. The pathlength for the RIG measurement was 200 microm and the angular LOD was 0.23 micro(rad) with a detection volume of 8 nl at both positions. The average molecular mass resolution was 9% (relative standard deviation) for a series of PEGs ranging in molecular mass from 106 to 22 800 g/mol. With this excellent mass resolution, small molecules such as monosaccharides, disaccharides, and so on, are readily distinguished. The sensor is demonstrated to readily determine unknown diffusion coefficients.     

Thermogravimetric analysis of polycarbonates and polythiocarbonates with chlorinated aromatic side-rings

The thermal stability and kinetics parameters of polycarbonates and polythiocarbonates derived from diphenols with chlorinated aromatic side-rings were studied. The polycarbonates exhibited a higher thermal stability than the polythiocarbonates, except for polythiocarbonate Ib, which displayed similar behaviour to that of the analogous polycarbonate. The kinetic parameters of the thermal decomposition were determined by using the Arrhenius relationship and a computer program. In the considered temperature range, all the polymers degraded in a single stage with first-order kinetics.

---

Zusammenfassung Es wurde die thermische Stabilität und die kinetischen Parameter von aus Diphenolen mit chlorierten aromatischen Nebenringen abgeleiteten Polycarbonate und Polythiocarbonate untersucht. Polycarbonate zeigen eine höhere thermische Stabilität als Polythiocarbonate. Eine Ausnahme bildet das Polythiocarbonat Ib, das in seinem Verhalten den Polycarbonaten gleicht. Mittels der Arrheniusschen Gleichung und einem Rechnerprogramm wurden die kinetischen Parameter der thermischen Zersetzung ermittelt. Im untersuchten Temperaturbereich zersetzen sich alle Polymere in einer einstufigen Reaktion erster Ordnung.

---

---

The authors acknowledge financial support from the Dirección de Investigación of the Pontificia Universidad Católica de Chile.     

Characterization and complementation of a Pichia stipitis mutant unable to grow on d-xylose or l-arabinose

Pichia stipitis CBS 6054 will grow on d-xylose, d-arabinose, and l-arabinose. d-Xylose and l-arabinose are abundant in seed hulls of maize, and their utilization is important in processing grain residues. To elucidate the degradation pathway for l-arabinose, we obtained a mutant, FPL-MY30, that was unable to grow on d-xylose and l-arabinose but that could grow on d-arabinitol. Activity assays of oxidoreductase and pentulokinase enzymes involved in d-xylose, d-arabinose, and l-arabinose pathways indicated that FPL-MY30 is deficient in d-xylitol dehydrogenase (D-XDH), d- and l-arabinitol dehydrogenases, and d-ribitol dehydrogenase. Transforming FPL-MY30 with a gene for xylitol dehydrogenase (PsXYL2), which was cloned from CBS 6054 (Gen Bank AF127801), restored the D-XDH activity and the capacity for FPL-MY30 to grow on l-arabinose. This suggested that FPL-MY30 is critically deficient in XYL2 and that the d-xylose and l-arabinose metabolic pathways have xylitolas a common intermediate. The capacity for FPL-MY30 to grow on d-arabinitol could proceed through d-ribulose.     

On the synthesis of 3(5)-carbomethoxy-4-hetarylpyrazoles

3(5)-Carbomethoxy-4-hetarylpyrazoles 3 can be obtained by the aromatization of the corresponding cis-3-benzamido-3-carbomethoxy-4-hetaryl-Δ¹-pyrazolines 2 obtained by 1,3-dipolar cycloaddition of diazo-methane with methyl Z-2-benzamido-3-hetarylpropenoates 1. An explanation, based on FMO theory, for the different reactivity of the dipolarophiles with diazomethane is given.     

An electrically conductive plastic composite derived from polypyrrole and poly(vinyl chloride)

An electrically conductive plastic material was obtained by the electrochemical polymerization of pyrrole in a poly(vinyl chloride) matrix. The transmission electron microscopy shows that polypyrrole is uniformly distributed in the matrix. The conductivity of the composites fall in the range of 5 to 50 S/cm, and their mechanical properties, as measured in a stress—strain test, are very similar to those of pure poly(vinyl chloride). These can be further improved by addition of poly(chloroprene) rubber as a plasticizer.     

ULTRAVIOLET SOLAR RADIATION IN THE HIGH LATITUDES OF SOUTH AMERICA

Abstract Measurements of the UV solar irradiance are available from Ushuaia, Tierra del Fuego during the spring and summer seasons of 4 consecutive years beginning in 1989. In addition, column ozone amounts derived from satellite-based measurements exist for this location over the entire period from 1980 through 1991. Monthly mean column ozone over Ushuaia shows a general decline over the observing period, and a large day-to-day variability exists within a given month. Ozone amounts for the years 1980 through 1986 combined with a model of radiative transfer provide a climatological baseline against which to interpret the more recent ground-based irradiance data. We focus on monthly mean noontime irradiances integrated over 5 nm wide spectral bands near 305 nm and 340 nm, respectively. Measurements in the 340 nm band show that cloudiness has a large influence on both the absolute monthly mean irradiances and their interannual variability. For example, during December the 340 nm band irradiance varied from approximately 50% of the clear-sky value in 1992 to 65% in 1991. When the influence of cloudiness is removed, most of the months show irradiances in the 305 nm band that are larger than predicted from the climatological ozone amounts. The largest percentage enhancement occurred in October 1991 when the irradiance exceeded the baseline by 56%. The largest absolute irradiances occur in December, where the measurements range from 5.8% below the baseline in 1991 to 31% above in 1990.     

On the synthesis of geometric isomers of 2-methyl (or phenyl)-4-[α-arylethylidene]-5(4H)-oxazolones

Several Z-2-methyl(or phenyl)-4-[α-arylethylidene]-5(4H)-oxazolones 3Z, 4Z were prepared. The results obtained were compared by diazomethane insertion and condensation procedure. In order to synthesize E-2-phenyl-4-[α-arylethylidene]-5(4H)-oxazolones 4E hydrogen bromide isomerization in dry benzene was used.     

Terephthalamide derivatives as mimetics of helical peptides: disruption of the Bcl-x(L)/Bak interaction

A series of Bcl-x(L)/Bak antagonists, based on a terephthalamide scaffold, was designed to mimic the alpha-helical region of the Bak peptide. These molecules showed favorable in vitro activities in disrupting the Bcl-x(L)/Bak BH3 domain complex (terephthalamides 9 and 26, K(i) = 0.78 +/- 0.07 and 1.85 +/- 0.32 microM, respectively). Extensive structure-affinity studies demonstrated a correlation between the ability of terephthalamide derivatives to disrupt Bcl-x(L)/Bak complex formation and the size of variable side chains on these molecules. Treatment of human HEK293 cells with the terephthalamide derivative 26 resulted in disruption of the Bcl-x(L)/Bax interaction in whole cells with an IC(50) of 35.0 microM. Computational docking simulations and NMR experiments suggested that the binding cleft for the BH3 domain of the Bak peptide on the surface of Bcl-x(L) is the target area for these synthetic inhibitors.