Modification of magnetic anisotropy in metallic glasses using high-energy ion beam irradiation

Heavy ion irradiation in the electronic stopping power region induces macroscopic dimensional change in metallic glasses and introduces magnetic anisotropy in some magnetic materials. The present work is on the irradiation study of ferromagnetic metallic glasses, where both dimensional change and modification of magnetic anisotropy are expected. Magnetic anisotropy was measured using Mössbauer spectroscopy of virgin and irradiated Fe₄₀Ni₄₀B₂₀ and Fe₄₀Ni₃₈Mo₄B₁₈ metallic glass ribbons. 90 MeV ¹²⁷I beam was used for the irradiations. Irradiation doses were 5×10¹³ and 7.5×10¹³ ions/cm². The relative intensity ratios D ₂₃ of the second and third lines of the Mössbauer spectra were measured to determine the magnetic anisotropy. The virgin samples of both the materials display in-plane magnetic anisotropy, i.e., the spins are oriented parallel to the ribbon plane. Irradiation is found to cause reduction in magnetic anisotropy. Near-complete randomization of magnetic moments is observed at high irradiation doses. Correlation is found between the residual stresses introduced by ion irradiation and the change in magnetic anisotropy.     

Three chiral vinyldioxaza­borocanes

The structures of three chiral vinyldioxaza­borocanes are reported, namely (2E)‐ and (2Z)‐6‐benzyl‐2‐buten‐2‐yl‐1,3,6,2‐dioxaza­borocane, C₂₇H₃₀BNO₂, (II) and (III), respectively, and (2Z)‐2‐buten‐2‐yl‐6‐isobutyl‐1,3,6,2‐dioxaza­boro­cane, C₂₄H₃₂BNO₂, (IV). These compounds may be useful in asymmetric reactions. In the structures reported here, the N—B donor–acceptor bond is longer than in any previously reported analogous compounds.     

Validity of the rotational sudden approximation for vibrational relaxation in He + CO

Calculations of cross sections and rate constants are reported for the vibrational relaxation of CO in collision with ³He and ⁴He. Results computed using a semiclassical technique and a vibrational close-coupling, rotational infinite-order sudden method are compared.     

Mechanism of photoinduced changes in the structure and optical properties of amorphous As2S3

We propose a mechanism of photostructural changes in amorphous As2S3 ( a-As2S3) on the basis of ab initio molecular orbital calculations on clusters of atoms modeling the local structure of the amorphous system. We have found that trigonal AsS3 pyramidal units can be transformed into a fivefold coordinated As site having four As-S bonds and one As-As bond via a photoionization process. This photoinduced coordination defect center exhibits a lower photoabsorption energy as compared with the usual pyramidal structure, explaining the observed photodarkening effect of a-As2S3.     

The influence of a transverse magnetic field on a subnormal glow discharge in air

In subnormal glow discharge under d.c. excitation at different pressure in a varying transverse magnetic field (0 to 30 G) some measurements have been carried out for various initial average tube currents. The voltage across the discharge increases and average tube current and residual current decreases in the magnetic field. With the help of Beckman’s expression [4] for the axial field and the electron density distribution in a transverse magnetic field the observed variation of current and voltage can be satisfactorily explained. The variation of axial electric field with transverse magnetic field can be represented to a fair degree of accuracy by the derived equation. The behaviour of residual current with magnetic field has been observed in these oscillations.     

Vortex Counter-Current Chromatography: Performance of a New Preparative Column

A new preparative column for the vortex counter-current chromatograph was fabricated by making many (966) cylindrical separation units to a high-density polyethylene disk and then threading them with 6–40 taps. The resulting column had a total capacity of 364 mL. The performance of this vortex column was examined with three different two-phase solvent systems each using a set of suitable test samples: hexane–ethyl acetate–methanol–0.1 M hydrochloric acid (1:1:1:1, v/v) for the separation of DNP-amino acids; 1-butanol–acetic acid–water (4:1:5, v/v) for the separation of dipeptides; and hexane–acetonitrile–water (20:15:2, v/v) for the separation of Sudan dyes. Most of the separations show high partition efficiency of over a thousand theoretical plates, as expected based on the results previously obtained in preliminary separations with a small column. Overall, the results of the present study suggest that further improvement of the partition efficiency can be obtained by the modifying column configuration.

     

Improved partition efficiency with threaded cylindrical column in vortex counter-current chromatography

Type-I coil planet centrifuge produces a uniformly circulating centrifugal force field to produce vortex motion of two immiscible solvent phases in a cylindrical cavity of the separation column to perform efficient countercurrent chromatography. The partition efficiency obtained from the original vortex column was substantially improved by threading the cylindrical cavity to increase the area of mass transfer between the two phases. Partition efficiency of the threaded column was evaluated by three different two-phase solvent systems with a broad range of hydrophobicity each with a set of suitable test samples. Overall results of the present studies indicated that the threaded cylindrical column substantially improves the partition efficiency in terms of theoretical plate number, peak resolution, and height equivalent of one theoretical plate. The results also indicated that higher peak resolution is produced by eluting either the upper phase in the head to tail direction or the lower phase in the reversed direction. When there is a choice in the mobile phase, a better separation is achieved by using the less viscous phase as the mobile phase. Since the present system gives extremely low column pressure, it may be a potential alternative to the conventional type-J HSCCC system for a large-scale preparative separation.     

Hydride as a leaving group in the reaction of pinacolborane with halides under ambient Grignard and Barbier conditions. One-pot synthesis of alkyl, aryl, heteroaryl, vinyl, and allyl pinacolboronic esters

Grignard reagents (aliphatic, aromatic, heteroaromatic, vinyl, or allylic) react with 1 equiv of 4,4,5,5-tetramethyl-1,3,2-dioxaborolane (pinacolborane, PinBH) at ambient temperature in tetrahydrofuran (THF) to afford the corresponding pinacolboronates. The initially formed dialkoxy alkylborohydride intermediate quickly eliminates hydridomagnesium bromide (HMgBr) and affords the product boronic ester in very good yield. Hydridomagnesium bromide (HMgBr) in turn disproportionates to a 1:1 mixture of magnesium hydride (MgH(2)) and magnesium bromide (MgBr(2)) on addition of pentane to the reaction mixture. DFT calculations (Gaussian09) at the B3LYP/6-31G(d) level of theory show that disproportionation of HMgBr to MgH(2) and MgBr(2) is viable in the coordinating ethereal solvents. This reaction also can be carried out under Barbier conditions, where the neat PinBH is added to the flask prior to the in situ formation of Grignard reagent from the corresponding organic halide and magnesium metal. Pinacolboronic ester synthesis under Barbier conditions does not give Wurtz coupling side products from reactive halides, such as benzylic and allylic halides. The reaction between PinBH and various Grignard reagents is an efficient, mild, and general method for the synthesis of pinacolboronates.     

A multifaceted approach to hydrogen storage

The widespread adoption of hydrogen as an energy carrier could bring significant benefits, but only if a number of currently intractable problems can be overcome. Not the least of these is the problem of storage, particularly when aimed at use onboard light-vehicles. The aim of this overview is to look in depth at a number of areas linked by the recently concluded HYDROGEN research network, representing an intentionally multi-faceted selection with the goal of advancing the field on a number of fronts simultaneously. For the general reader we provide a concise outline of the main approaches to storing hydrogen before moving on to detailed reviews of recent research in the solid chemical storage of hydrogen, and so provide an entry point for the interested reader on these diverse topics. The subjects covered include: the mechanisms of Ti catalysis in alanates; the kinetics of the borohydrides and the resulting limitations; novel transition metal catalysts for use with complex hydrides; less common borohydrides; protic-hydridic stores; metal ammines and novel approaches to nano-confined metal hydrides.