Highly dispersed palladium nanoclusters incorporated in amino‐functionalized silica spheres for the selective hydrogenation of succinic acid to γ‐butyrolactone

Highly dispersed palladium nanoclusters incorporated on amino‐functionalized silica sphere surfaces (Pd/SiO₂‐NH₂) were fabricated by a simple one‐pot synthesis utilizing 3‐(2‐aminoethylamino)propyltrimethoxysilane (AAPTS) as coordinating agent. Uniform palladium nanoclusters with an average size of 1.1 nm can be obtained during the co‐condensation of tetraethyl orthosilicate and AAPTS owing to the strong interaction between palladium species and amino groups in AAPTS. The palladium particle size can be controlled by addition of AAPTS and plays a significant role in the catalytic performance. The Pd/SiO₂‐NH₂ catalyst exhibits high catalytic activity for succinic acid hydrogenation with 100% conversion and 94% selectivity towards γ‐butyrolactone using 1,4‐dioxane as solvent at 240°C and 60 bar for 4 h. Moreover, the Pd/SiO₂‐NH₂ catalyst is robust and readily reusable without loss of its catalytic activity. Copyright © 2015 John Wiley & Sons, Ltd.     

A Photoactivated Cu–CeO2 Catalyst with Cu-[O]-Ce Active Species Designed through MOF Crystal Engineering

Fully utilizing solar energy for catalysis requires the integration of conversion mechanisms and therefore delicate design of catalyst structures and active species. Herein, a MOF crystal engineering method was developed to controllably synthesize a copper–ceria catalyst with well-dispersed photoactive Cu-[O]-Ce species. Using the preferential oxidation of CO as a model reaction, the catalyst showed remarkably efficient and stable photoactivated catalysis, which found practical application in feed gas treatment for fuel cell gas supply. The coexistence of photochemistry and thermochemistry effects contributes to the high efficiency. Our results demonstrate a catalyst design approach with atomic or molecular precision and a combinatorial photoactivation strategy for solar energy conversion.     

As+注入硅的紫外-可见椭圆偏振光谱

本文采用椭圆偏振光谱法研究了剂量为1×10¹⁶—3×10¹²cm^-2的As⁺注入硅,及其在700℃退火后的光学性质。得出:当As⁺注入剂量增大到某一程度后,便呈非晶特性。低于临界剂量的样品,其n-λ,ε₂-λ关系曲线随剂量的增大而往下方移动,呈有规律变化;退火后,在大于4000?波段,n-λ与ε₂-λ曲线基本恢复到单晶硅状态。但在小于4000?的紫外区却未完全恢复,注入剂量越大,偏离单晶硅就越大。并指出,紫外光区是离子注入硅的信息敏感区;用有效质量模型计算出注入剂量与损伤度的关系。计算结果与实验符合得较好。 关键词：     

Self-assembly of Carboxyl Functionalized Polystyrene Nanospheres into Close-packed Monolayers via Chemical Adsorption

The polyacrylic acid functionalized polystyrene nanospheres were synthesized and self-assembled into irregular, densely packed monolayers in non-aqueous media. The polymer nanoparticles were chemically adhered to substrates. The morphologies of the resulting films were investigated. The impact of the volume fraction of alcohol in the mixed solvents on the particle adsorption and fabrication of nanosphere assembled films was examined.     

一种可实时化的多光谱图像融合系统

在多光谱摄影和光电成像技术基础上，本文提出了一种可实时化的多光谱图像融合系统。与多光谱摄影相比，不仅可实现多光谱实时化摄像，而且光谱响应进一步向近红外延伸，并引入图像处理技术。实验表明：这种技术对于增加系统的识别能力具有明显的作用，可进一步构成不同用途的新型多光谱图像融合系统。     

A Nonconforming Arbitrary Quadrilateral Finite Element Method for Approximating Maxwell's Equations

The main aim of this paper is to provide convergence analysis of Quasi-Wilson nonconforming finite element to Maxwell's equations under arbitrary quadrilateral meshes.The error estimates are derived,which are the same as those for conforming elements under conventional regular meshes.     

Fuzzy矩阵方程的摄动问题

讨论了Fuzzy矩阵A的同解简化矩阵A^(2)，指出陈贻源论文《解Fuzzy关系方程》中定量3的错误。研究Fuzzy矩阵方程的摄动问题，解决了汤服成（2000）提出的未解决问题。     

C_nP_4~4(n=1～7)团簇结构与能量的密度泛函研究

使用分子图形软件设计出多种CnP-4(n =1～ 7)的结构模型 ,并进行B3LYP密度泛函几何构型优化和振动频率计算 .最稳定的CP-4和C2 P-3 都是平面环状结构 .最稳定的CnP-4(n =3 ,5 ,7)结构在直碳链的一端连接 1个磷原子且另一端是P3 C的四元环的平面结构 .最稳定的CnP-4(n =4,6)结构在直碳链的一端连接 1个磷原子且另一端是P3 的三元环的锄状结构 .直碳链可与平面环的磷原子生成大π键 .大多数构型是由C2 ,C3 ,C4子结构以环状或链状方式组成的 .碳原子与磷原子以交替方式排列的结构数量少、能量高 .     

O～3岁儿童微量元素检测及纠正150例观察与体会

对西安地区150例0～3岁儿童进行了六种微量元素：钙、锌、铜、铁、镁、硒的检测，发现微量元素缺乏可导致急慢性感染、免疫力低下、小儿营养不良、贫血、发育迟缓等症状。并对小儿营养不良、喂养不当进行矫正。其中铁、钙、锌同时缺乏占50％。     

相位共轭皮秒光脉冲的直接观察和记录

利用条纹照相机直接观察和记录了由全息相位共轭技术产生的相位共轭的皮秒光脉冲。实验结果与理论相符合。 关键词：