蒙脱土负载聚合催化剂用于乙烯原位共聚制备LLDPE

将蒙脱土 (MMT)负载的聚合催化剂rac Et(Ind) 2 ZrCl2 和均相低聚催化剂 { [(2 ArNC(Me) ) 2 C5H3N]FeCl2 } (Ar=2 ,4 C6 H4 (Me) 2 )组成双功能催化体系用于乙烯原位共聚制备线性低密度聚乙烯 (LLDPE) .通过调节两种催化剂之间的比例和MAO的用量制备了一系列支化度不同的LLDPE产品 .聚合反应动力学曲线表明 ,两种催化剂表现出各自的乙烯吸收特征 ,蒙脱土负载化的共聚催化剂催化乙烯聚合时反应平稳易控制 .DSC曲线表明 ,聚合物的熔点和结晶度随Fe Zr的增大而减小 .用密度梯度法测得的聚合物密度随Fe Zr的增大而降低 .从1 3C NMR谱图上可以看到 ,得到的聚合物是LLDPE ,其支化度随Fe Zr的增大而增大 ,聚合物中仍含有未共聚的α 烯烃 ,这一点从GPC上也能得到验证 .扫描电镜 (SEM)照片表明用这种双功能催化剂共聚得到的LLDPE具有良好的形态     

Preparation and structure of calcium peroxide‐templated porous calcium carbonate crystals

Crystalline calcium carbonate with randomly dispersed porous structure was prepared through co‐ crystallization with calcium peroxide and the following template elimination by a post heating treatment and washing with water. The artificial CaCO₃ possess abundant macro‐mesopores structures and high surface area. This approach may open a new general route for the preparation of crystals with high porosity and structure specialty. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

The application of pore size tunable SBA-15 molecular sieves in direct conversion of syngas to ethanol catalyzed by RhCl<Subscript>3</Subscript> and Fe(NO<Subscript>3</Subscript>)<Subscript>3</Subscript>

Four kinds of mesoporous molecular sieve SBA-15 (SBA-15-HCl, SBA-15-HPMo, SBA-15-HPW, and SBA-15-HSiW) were synthesized by different methods or materials. Loaded with RhCl₃ and Fe(NO₃)₃, the SBA-15-HPMo supported catalyst performed well in catalyzing direct conversion of syngas to ethanol.     

双功能催化剂体系催化乙烯原位聚合制备长链支化聚乙烯研究

以蒙脱土负载 β 二酮二氯化锆作为乙烯齐聚催化剂与Et(Ind) 2 ZrCl2 复合组成了原位双功能聚合催化体系 ,成功地以乙烯为唯一单体唯一反应釜制备长链支化聚乙烯 ,该催化剂体系具有乙烯共聚活性高 ,聚合物物性可调等优点     

Preparation of a PE/MT Composite by Copolymerization of Ethylene with In‐Situ Produced Ethylene Oligomers under a Dual Functional Catalyst System Intercalated into MT Layer

The catalyst dichlorobis(acetylacetone)zirconium was intercalated into montmorillonite (MT) together with AlEt₂Cl as a cocatalyst. Reacting ethylene in the presence of this catalyst yields α‐olefin oligomers with over 80% selectivity. [rac‐Et(Ind)₂ZrCl₂]/MAO was then added to form a dual functional catalyst system. An MT particle‐dispersed polyethylene composite was prepared by copolymerization of the in‐situ produced oligomers with ethylene using this dual system.     

乳化结晶法制精蒽新工艺的研究

研究了用乳化结晶法从粗蒽制精蒽的新工艺，考察了溶剂种类、乳化剂种类、乳化剂用量、水／粗蒽质量比、助剂加入量以及结晶终温等因素对精蒽质量的收率的影响，实验结果表明：以糖醛作溶剂，米唑啉物Ｓｐａｎ２０复合型乳化剂，经一次乳化结晶得得精蒽纯度大于９５％，符合国家一级精蒽标准，蒽收率大于８０％。     

Novel layered calcosilicate-immobilized iron-based diimine catalyst for ethylene polymerization

A novel layered calcosilicate (CAS-1) was employed to immobilize an iron-based diimine catalyst 2,6-bis[1-(2,6-diisopropylphenylimino)ethyl]pyridine iron chloride (I) onto it to form a supported catalyst (CC) for the first time. The crystal structure of CAS-1 was determined by X-ray crystallographic analysis in addition to SEM characterization. The CC-catalyzed ethylene polymerization exhibited good catalytic activities with either co-catalyst methylaluminoxane (MAO) or triethylaluminum (TEA). The resulting polyethylenes possessed not only higher molecular weight, melting temperature (T_m), and decomposition onset temperature (T_onset) than those obtained with its homogeneous counterpart, but also a unique morphology.     

Study of a new type linear ultrasonic motor with double-driving feet

A new type linear USM with double-driving feet has been developed. The stator consists of eight piezoelectric ceramic plates and one brass plate. Piezoelectric ceramics plates are polarized along the thickness and are symmetrically bonded to the two surfaces of one rectangle brass plate. Double-driving feet are assembled on the same side of the brass plate. The working vibration mode is a composite in-plane bimode, which consists of the first longitudinal in-plane vibration mode and the second bending one. The basic size of the linear USM is determined carefully by FEA. The characteristics of the prototype motor were measured experimentally.     

螯合型羰基铑配合物催化甲醇羰基化反应的机理研究

报道了螯合型正方平面羰基铑配合物催化甲醇羰基化反应的机理研究. 通过含有两种与铑具有不同配位能力的授体的配体, 与四羰基二氯二铑形成螯合型正方平面阳离子配合物. 研究证明, 该类配合物在催化甲醇羰基化反应过程中, 其活性物种区别于文献报道的[Rh(CO)2I2]－阴离子. 配合物中铑与吡啶环上共轭N形成的N→Rh配键, 在羰基化反应过程中并非通常认为的断裂而是形成新的活性物种, 即配体与铑作为整体参与了CH3I的氧化加成及CH3COI的生成过程. 通过对相应的聚合物配体铑催化剂的研究, 进一步证实了这个反应机理. 这一结果, 对该类催化剂分子设计, 以及克服其工业使用中的催化剂沉淀失活等现象均有重要意义.     

柱状弯曲超声波电机的定转子接触方式和力传递模型

柱状弯曲超声波电机在相机的镜头调焦、电动窗帘以及各种MEMS的微驱动等领域具有广泛的应用前景。本文针对柱状弯曲超声波电机,理论和实验提示了定、转子的单点和双点接触方式,提出了临界预紧力概念,给出了这两种方式下的定、转子间的力接触传递关系,进而给出了电机的机械特性和工作效率计算式,结合研制的电机样机进行分析,验证了本模型的准确性,并分析了电机性能与预紧力的关系。研制的φ14 mm的电机样机,实现堵转转矩达0.11 Nm,空转转速为300 r/min左右。