Synthesis,characterization, and curing kinetics of novel ladder‐like polysilsesquioxanes containing side‐chain maleimide groups

Two ladder‐like polysilsesquioxanes (LPS) containing side‐chain maleimide groups have been synthesized successfully by reacting N‐(4‐hydroxyphenyl)maleimide (HPM) with LPS containing 100 mol % of chloropropyl groups (Ladder A ) and 50 mol % of each methyl and chloropropyl group (Ladder B ). HPM was synthesized by reacting maleic anhydride with 4‐aminophenol, and the resulting amic acid was imidized using p‐toluenesulfonic acid as a catalyst (Scheme 1 ). The LPSs were characterized by Fourier transform infrared (FTIR), ¹H nuclear magnetic resonance (NMR), proton‐decoupled ¹³C NMR, ²⁹Si NMR, wide‐angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). Characterization indicated that these polymers had ordered ladder‐like structures with possible defects. These polymers were soluble in common solvents at ambient temperature, which suggested that they were not crosslinked. Both the polymers and the HPM were cured, and their kinetics were followed by dynamic DSC. The Ozawa and Kissinger methods were used to calculate activation energies for curing. Curing increased the temperature at which both 5% weight loss and maximum rate of weight loss were observed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4036–4046, 2004     

Moisture sorption, transport, and hydrolytic degradation in polylactide

Management of moisture penetration and hydrolytic degradation of polylactide (PLA) is extremely important during the manufacturing, shipping, storage, and end-use of PLA products. Moisture transport, crystallization, and degradation, in PLA have been measured through a variety of experimental techniques including size-exclusion chromatography, differential scanning calorimetry, and X-ray diffraction. Quartz crystal microbalance and dynamic vapor sorption experiments have also been used to measure moisture sorption isotherms in PLA films with varying crystallinity. A surprising result is that, within the accuracy of the experiments, crystalline and amorphous PLA films exhibit identical sorption isotherms.     

CONFLICT AND COOPERATION IN UTILIZING A COMMON PROPERTY RESOURCE

Noncooperative games are used to demonstrate that, while free riding is always an option, the “tragedy of the commons” is not inevitable. When the decision to cooperate or free ride is considered in a dynamic setting, there is no intermediate case where some cooperate and others free ride. The game is only stabilized in either full cooperation or full defection. The important factor in obtaining a cooperative outcome is the critical number of players that decide to cooperate. The concept of commitment is used to demonstrate the necessary and sufficient conditions for full cooperation. Although the analysis is based on a shared water resource, it can be extended to other natural resources with common costs and private benefits, especially in the cases where there are no international authorities or treaties that internalize the externalities involved in privatizing the resource.     

Direkte fluorimetrische Bestimmung von 3,4-Benzpyren im w?\rigen Medium

Zusammenfassung Es wurde eine direkte Bestimmung des 3,4-Benzpyrens in wä\riger Lösung beschrieben, die auf der Löslichkeitserhöhung beruht, die das in Wasser schwer lösliche 3,4-Benzpyren durch Coffein erfährt. Es können so noch 4 ng/ml bei der angegebenen Standardisierung bestimmt werden. Bei der Direktbestimmung des 3,4-Benzpyrens im System Coffein-Wasser ist ein p_H >6,0 einzuhalten, da bei höheren Wasserstoffionenkonzentrationen die Fluorescenzintensität stark abnimmt.

---

Direct fluorimetric determination of benzo(a)pyrene in aqueous medium

A method for the direct determination of benzo(a)pyrene in aqueous solution is based on the increase of its solubility by coffeine. 4 ng of benzo(a)pyrene/ml can be determined by the procedure described. In this direct determination in the system coffeine-water the p_H has to be adjusted to >6.0, as the fluorescence intensity considerably decreases with higher H⁺ concentrations.

---

---

Eine ausführliche Darstellung findet sich in der Dissertation von G. Becker, Univ. Karlsruhe 1968.

---

Die Messungen zu dieser Arbeit -wurden an dem Chemischen Untersuchungsamt für das Saarland, Saarbrücken, mit einem Spektralphotometer der Deutschen Forschungsgemeinschaft ausgeführt. Beiden Institutionen sind wir zu Dank verpflichtet.     

Electrode processes in the oxidation of tetrahydroisoquinoline derivatives

The electrochemical oxidation of the alkaloid laudanosine (Ia) to O-methylflavinantine (II) has been studied in acetonitrile solvent. Using cyclic voltammetry, rotating disc voltammetry and preparative electrolyses on several alkaloids, simple aliphatic amines and aromatic compounds, some aspects of the mechanism of this coupling reaction are elucidated. The first anodic wave for laudanosine at platinum has E_p=0.55 V vs. Ag/Ag⁺. The electrode rapidly becomes partially passivated at potentials above 0.5 V. This is due to a film which “dissolves” below 0.5 V, at a rate independent of the potential. It is shown that the reaction (Ia)→(II) proceeds at 0.5 V by initial oxidation of the amine moiety. If acids such as sodium bicarbonate are added to the anolyte the amine is protonated causing the first wave to disappear. Oxidation at 1.1 V under these acidic conditions produces the same product, but more rapidly and in significantly higher yield because electrode filming and side reactions resulting from the amine oxidation are abrogated.     

Fluorous Synthesis of Biaryl-Substituted Proline Analogs by 1,3-Dipolar Cycloaddition and Suzuki Coupling Reactions

A solution-phase synthesis of bicyclic prolines containing four points of diversity has been developed by a two-step synthesis involving 1,3-dipolar cycloaddition of perfluoroalkylsulfonyl-protected hydroxybenzaldehydes followed by Pd-catalyzed Suzuki coupling reaction of fluorous sulfonates with boronic acids. Both reactions are conducted under microwave irradiation and reaction mixtures are purified by solid-phase extractions without performing chromatography.     

Bivoltametric titrations using electrodes with innovative geometry

Electrodes with different surface areas were investigated for the determination of reversible, quasireversible, irreversible or electroinactive substrates. Two kinds of electrodes were constructed, a helical electrode with a given asymmetry and a platinum array electrode with a variable area. These electrodes were applied for the cerimetry of ammonium iron(II) sulfate and for the bromatometry of various organic substances. The theoretically derived effects on the shape of the voltametric titration curve are verified experimentally. It is possible to sharpen one side of the peak and to broaden the other side, depending on the system and the side of the peak one is interested in. It is possible to improve the bivoltametric determination of hydroquinone, benzocaine and sulfaguanidine by bromatometry by the directed employment of electrodes of different areas. For the bromatometric determination of electrochemically irreversible substrates the use of the electrode geometries proposed is a way to obtain a sharp bend and a steep decrease of titration curves with low values of the constant current which is a basic requirement for the accuracy.     

Selective modification of the 2-position of pyridoxol

Pyridoxol, protected by acetylation of the hydroxyl groups, has been converted to its N-oxide which upon reaction with perfluoroacetie anhydride yields a 2-nor-2-hydroxymethylpyridoxol derivative as an intermediate. This compound undergoes acyl migration from the 3-position. Protection of the pyridoxol hydroxyls by benzylalion followed by the same treatment yields the unrearranged α²-hydroxy derivative. This compound has been converted to a series of α²-substituted pyridoxols (X = -Cl, -Br, -OCOCH₃, -OCH₃, -OC₂H₅).