Characterization of a 4-miktoarm star copolymer of the (PS-b-PI)3 PS type by temperature gradient interaction chromatography

Temperature gradient interaction chromatography (TGIC) was applied for the separation of a complex miktoarm star copolymer which has one polystyrene (PS) arm and three polystyrene-b-polyisoprene (PS-b-PI) diblock copolymer arms. Such miktoarm star polymers are much more difficult to characterize than branched homopolymers since the byproduct, typically polymers with missing arm(s) or coupled products, have not only different molecular weights but also different compositions. TGIC was able to fully separate the byproducts, and the composition of the molecular species corresponding to the different separated elution peaks was determined by two methods, fractionation/NMR and multiple detection (UV and RI). A reasonable agreement between the results of the two methods was obtained. By using the composition found, the corresponding molecular weights were determined by multi-angle light scattering detection. Based on the composition and the molecular weight we were able to identify the structure of the different molecular species.     

Atom transfer radical polymerization of methyl methacrylate by copper(I)‐pyridine‐2‐carboximidate catalysts

Pyridine‐2‐carboximidates [methyl ( 1a ), ethyl ( 1b ), isopropyl ( 1c ), cyclopentyl ( 1d ), cyclohexyl ( 1e ), n‐octyl ( 1f ), and benzyl ( 1g )] were prepared from the reaction of 2‐cyanopyridine with the corresponding alcohols. Cyclopentyl‐substituted 1d was found to be a highly effective ligand for copper‐catalyzed atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA). For example, the observed rate constant for a CuBr/ 1d catalytic system was found to be nearly twice as high as the cyclohexyl‐substituted CuBr/ 1e catalytic system [k_obs = (1.19 vs 0.56) × 10^?4 s^?1). The effects of the solvents, temperature, catalyst/initiator, and solvent/monomer ratio on the ATRP of MMA were studied systematically for the CuBr/ 1d catalytic system. The optimum condition for the ATRP of MMA was found to be a 1:2:1:400 [CuBr]_o/[ 1d ]_o/[ethyl 2‐bromoisobutyrate]_o/[MMA]_o ratio at 60 °C in veratrole solution, which yielded well‐defined poly(MMA) with a narrow molecular weight distribution of 1.14. The catalytically active copper complex 2d was isolated from the reaction of CuBr with 1d . Narrow molecular weight distributions as low as 1.06 were achieved for the CuBr/ 1d catalytic system by employing 10% of the deactivator CuBr₂. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2747–2755, 2004     

Structure of a poly(2,5‐benzimidazole)/phosphoric acid complex

As‐cast films of poly(2,5‐benzimidazole) exhibit uniplanar orientation in which the planes of the aromatic rings lie parallel to the film surface. Upon doping with phosphoric acid, the original crystalline order is lost, but the doped film can be stretched to produce films with uniaxial orientation. After thermal annealing at 540 °C, nine Bragg reflections are resolved in the fiber diagram, and these are indexed by an orthorhombic unit cell with the dimensions a = 18.1 Å, b = 3.5 Å, and c = 11.4 Å, containing four monomer units of two chains. The absence of odd‐order 00l reflections points to a 2₁ chain conformation, which is probably planar so that the aromatic units can be stacked along the b axis. The water and phosphoric acid contents of the crystalline structure cannot be determined exactly because of the presence of extensive amorphous regions that probably have different solvation. The best agreement between the observed and calculated intensities is for an idealized structure containing two phosphoric acids and two water molecules per unit cell. However, the phosphoric acid is probably present mainly in the form of pyrophosphoric acid and its higher oligomers. In addition, the X‐ray data are consistent with a more disordered structure containing chains with random (up and down) polarity and a lack of c‐axis registry. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2576–2585, 2004     

Stability control of the electrooptic effect with new maleimide copolymers containing photoreactive tricyanopyrrolidene‐based chromophores

New photocrosslinkable maleimide copolymers have been synthesized by the attachment of a tricyanopyrrolidene‐based chromophore. The 2‐(3‐cyano‐4‐(2‐{4‐[hexyl‐(6‐hydroxy‐hexyl)‐amino]‐phenyl}‐vinyl)‐5‐oxo‐1‐{4‐[4‐(3‐oxo‐3‐phenyl‐propenyl)‐ phenoxy]‐butyl}‐1,5‐dihydro‐pyrrol‐2‐ylidene)‐malononitrile chromophore exhibits nonlinear optical activity and contains a chalcone moiety that is sensitive to UV light (λ = 330–360 nm) for crosslink formation. The maleimide monomers have also been functionalized with chalcone moieties. The resultant copolymers exhibit great processability, and one of them shows a maximum electrooptic coefficient of 90 pm/V at 1300 nm. We could control the thermal stability of the electrooptic coefficient with the newly synthesized photoreactive copolymers successfully. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 531–542, 2007     

Enhanced ferromagnetic properties of diluted Fe doped ZnO with hydrogen treatment

The single-phase diluted magnetic Fe-ion (5%) doped ZnO powders were prepared by solid-state reaction method. The powders were annealed in Ar or Ar/H₂(5%) atmosphere at 1200 °C. The crystal structure, electric and magnetic properties for the Zn_0.95Fe_0.05O powders have been studied with X-ray diffraction (XRD) vibrating sample magnetometer, resistance and Hall measurement. All the peaks for the XRD pattern of samples belong to the hexagonal (P6₃mc) lattice of ZnO, and no indication of a secondary phase. The lattice parameters for the Zn_0.95Fe_0.05O with an annealing in Ar/H₂(5%) atmosphere were a₀=3.256 Å and c₀=5.206 Å at room temperature. The hysteresis curve for the Zn_0.95Fe_0.05O at room temperature was enhanced ferromagnetic behaviour with an annealing in Ar/H₂(5%) atmosphere. We give an explanation for enhanced ferromagnetic behaviour with H₂ treatment by electric properties.     

Synthesis and electrical characteristics of polyaniline nanoparticles and their polymeric composite

Monodisperse polyaniline nanoparticles (PAPSSA) were synthesized from an oxidative dispersion polymerization using poly(sodium 4-styrenesulfonate) (PSSA) as both a polymeric stabilizer and a dopant agent due to its acidity. The nanoparticles were being stabilized with two different molecular weight of PSSA. Size effect of PAPSSA particles were examined by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and dynamic light scattering (DLS). The d.c. electrical conductivity of composite films on the glass substrate was measured by a four-probe method. It was found that the electrical properties of the composite films are affected by the content of nano-sized polyaniline and different molecular weights of stabilizer in the poly(vinyl alcohol) (PVA) matrix.     

A Reverse of bessel’s inequality in 2-inner product spaces and some grüss type related results with applications

A reverse of Bessel’s inequality in 2-inner product spaces and companions of Grüss inequality with applications for determinantal integral inequalities are given.     

Photodecomposition of several compounds commonly used as sunscreen agents

The photolysis reactions of three compounds commonly used as a sunscreen agents, Parsol 1789 (1-[4-(1,1-dimethylethyl)phenyl]-3-(4-methoxyphenyl)-1,3- propanedione), Oxybenzone ((2-hydroxy-4-methoxyphenyl)phenyl-methanone) and Padimate O (2-ethylhexyl-4-(dimethylamino)benzoate), were investigated to provide a chemical background to aid in the understanding of the photosensitization of the sunscreen agents. Photolysis was carried out in cyclohexane for 70–140 h using a mercury vapor lamp (450W) without excluding oxygen.

Irradation of Parsol 1789 in cyclohexane yielded tert-butylbenzene, p-tert-butylbenzoic acid and p-methoxybenzoic acid; products obtained from the combination of the sunscreen with the solvent included the cyclohexyl esters of p-methoxybenzoic acid, p-tert-butylbenzoic acid and methanoic acid; products obtained from the solvent included cyclohexanol, cyclohexanone and dicyclohexyl ether.

Irradiation of Oxybenzone in the cyclohexane for 100 h produced no detectable products by either gas or liquid chromatographic analysis. Oxybenzone was recovered unchanged and no products were observed from the photoinitiated reaction of oxygen with the solvent.

Irradiation of Padimate O in cyclohexane yielded the ethylhexyl esters of p-aminobenzoic acid, p-monomethylaminobenzoic acid and p-dimethylamino (o/m)-methylbenzoic acid, as well as products from the photoinitiated reaction of oxygen with the solvent.