Rheology and fiber degradation during shear flow of carbon-fiber-reinforced polypropylenes

The processing of fiber-reinforced thermoplastics is often accompanied by a significant fiber fracture. Therefore, it is important to assess the effect of processing variables on the extent of fiber damage occurring during product fabrication, such as extrusion or injection molding. The present paper discusses fiber damage caused by shear forces exerted on the composite by a molten matrix in both experimental and theoretical terms. The degradation process in carbon fiber-polypropylene composites is studied in a broad range of shear rates, although it occurs significantly only under high shearing in a capillary. Changes in fiber length and its distribution during the multi-flow through a capillary, as well as the materials’ rheological properties found in research after shearing, are discussed and the results are compared with a model of fiber-length analysis for the mixing-regrinding process. Published in Russian in Vysokomolekulyamye Soedineniya, Ser. A, 2006, Vol. 48, No. 9, pp. 1628–1639. The text was submitted by the authors in English.     

Correlation between the structure of water in the vicinity of carboxybetaine polymers and their blood-compatibility

The structure and hydrogen bonding of water in the vicinity of carboxybetaine homopolymer (poly[1-carboxy-N,N-dimethyl-N-(2'-methacryloyloxyethyl)methanaminium inner salt] (PolyCMB), and a random copolymer of CMB and n-butyl methacrylate, Poly(CMB-r-BMA), with various molecular weights were analyzed in their aqueous solutions and thin film with contours of O-H stretching of Raman and attenuated total reflection infrared (ATR-IR) spectra, respectively. The relative intensity of the collective band (C value) corresponding to a long-range coupling of O-H stretchings of the Raman spectra for aqueous solution of Poly(CMB-r-BMA) was very close to that for pure water, which is in contrast with the smaller C value in aqueous solution of ordinary polyelectrolytes. The number of hydrogen bonds collapsed by the presence of one monomer residue (N(corr) value) of PolyCMB and Poly(CMB-r-BMA) (CMB, 45 mol %) (M(w), 1.14 x 10(4) and 1.78 x 10(4), respectively) could be calculated from the C value. The N(corr) values were much smaller than those for ordinary polyelectrolytes and close to those for nonionic water-soluble polymers such as poly(ethylene glycol) and poly(N-vinylpyrrolidone). Furthermore, a water-insoluble Poly(CMB-r-BMA) with a large BMA content (M(w) = 347 kD, CMB 27 mol %) could be cast as a thin film (thickness, ca. 10 microm) on a ZnSe crystal for the ATR-IR analyses. At an early stage of sorption of water into the Poly(CMB-r-BMA) film, the O-H stretching band of IR spectra for the water incorporated in the film was similar to that for free water, which is in contrast with the drastic change in the O-H stretching band of water incorporated in polymer films such as poly(methyl methacrylate) (PMMA) and poly(n-butyl methacrylate) (PBMA). The theoretical vibrational frequency for water molecules hydrating a betaine molecule calculated by using a density functional method supported the experimental results. The adhesion of human platelets to Poly(CMB-r-BMA) films was much less than that to PMMA and PBMA. With an increase in the content of CMB residue, the number of platelets adhered to the Poly(CMB-r-BMA) film drastically decreased and then gradually increased, probably due to the increase in the roughness of the film surface. These results suggest that the carboxybetaine monomer residues with a zwitterionic structure do not significantly disturb the hydrogen bonding between water molecules in both aqueous solution and thin film systems, resulting in the excellent blood-compatibility of the carboxybetaine polymers.     

Temperature-Responsiveness of A-B-A Block Telomers at Solid-Liquid Interfaces

Macroinitiators were prepared by coupling disuccinimidyl ester of 4,4'-azobis(cyanovaleric acid) with poly(N-isopropylacrylamide) (PIPA), which had an amino group at its end. Styrene was telomerized with the initiators in THF. When the styrene content in the A-B-A block telomer obtained (PIPA-b-PSt-b-PIPA) was high, the telomer formed an irreversible aggregation resulting in microspheres, whereas the telomer with a much shorter styrene block could be dispersed monomolecularly. The telomers dispersed in water were aggregated by raising the temperature above 32 degrees C due to a coil-globule transition of PIPA moieties. The PIPA-b-PSt-b-PIPA could be strongly adsorbed to polystyrene (PSt) solid surfaces to form a layer, and the PSt blocks might lay on the PSt surface and the PIPA blocks might direct to the solution phase. The contact angle of air bubbles on the surface of telomer-coated PSt in the air-in-water system was dependent on temperature; that is, with the increase in temperature the contact angle of air bubbles largely decreased and leveled off above the coil-globule transition temperature (Tc). Correspondingly, the amount of protein Concanavalin A adsorbed to the telomer layer deposited on the PSt surface increased gradually with an increase in temperature and leveled off above the Tc. These phenomena were attributed to the changes in hydrophobicity of the telomer layer below and above the Tc. The usefulness of macroinitiators in preparing various kinds of block telomers which have responsiveness to external stimuli was strongly suggested. Copyright 1999 Academic Press.     

Electron microscope observation of lattice defects in the FeCr σ-phase

The lattice image of the FeCr σ-phase was observed by high-resolution electron microscopy with the c axis of the tetragonal cell parallel to the incident beam. It was found that bright dots of the observed image correspond to the positions of atoms in the $\text{z = ±}\text{1}\text{4}$ planes of the σ-phase structure. Sequence faults were found in the irregular part of the lattice image. The analysis of the faults shows that an extra plane of $\text{1}\text{2}\text{a}{}_0$ width is inserted into the regular structure and one side of the fault is slightly shifted parallel to the fault plane with respect to the other side, which is consistent with the model proposed by Frank and Kasper. A unit cell step of the sequence faults was found and a model of the step was proposed.     

2,2′-Isopropylidenebis[(4S,5R)-4,5-di(2-naphthyl)-2-oxazoline] ligand for asymmetric cyclization-carbonylation of meso-2-alkyl-2-propargylcyclohexane-1,3-diols

The oxidative cyclization-carbonylation of meso-2-alkyl-2-propargylcyclohexane-1,3-diols mediated by Pd(II) with chiral bisoxazoline (box ligand) afforded bicyclic-β-alkoxyacrylates. Based on a ligand screening, 2,2′-isopropylidenebis[(4S,5R)-4,5-di(2-naphthyl)-2-oxazoline] ligand has been developed. The products with a chiral quaternary carbon were obtained in 71-100% yields with 85-95% ee.     

Peroxotungstate immobilized on ionic liquid-modified silica as a heterogeneous epoxidation catalyst with hydrogen peroxide

Peroxotungstate immobilized on ionic liquid-modified SiO2 is capable of heterogeneously epoxidizing a wide range of olefins with the maintenance of the catalytic activity of homogeneous analogue. The epoxidation was immediately stopped by the removal of the catalyst, and no tungsten species could be found in the filtrate after the removal of the catalyst. These results can rule out any contribution to the observed catalysis from the tungsten species that leached into the reaction solution, and the observed catalysis is truly heterogeneous in nature. Furthermore, the catalyst was reusable without the loss of the catalytic performance.     

Profiling analysis of oligosaccharides in antibody pharmaceuticals by capillary electrophoresis

Carbohydrate chains in glycoprotein pharmaceuticals have important roles for the expression of their biological activities. Therefore, development of an assessment method for the carbohydrate chains is an important parameter for quality control of glycoprotein pharmaceuticals such as newly developed therapeutic antibodies. In this report, we applied capillary electrophoresis with laser-induced fluorescence detection to the analysis of carbohydrate chains after releasing with glycoamidase followed by derivatization with 3-aminobenzoic acid. We found that four major oligosaccharides present in antibody pharmaceuticals were successfully separated with good resolution. The present method showed good precision in both migration times and relative peak areas, and gave comparable accuracy with that using a derivatization method with 8-aminopyrene-1,3,6-trisulfonate.     

Ruthenium‐catalyzed fast living radical polymerization of methyl methacrylate: The R?Cl/Ru(Ind)Cl(PPh3)2/n‐Bu2NH initiating system

A fast living radical polymerization of methyl methacrylate (MMA) proceeded with the (MMA)₂? Cl/Ru(Ind)Cl(PPh₃)₂ initiating system in the presence of n‐Bu₂NH as an additive [where (MMA)₂? Cl is dimethyl 2‐chloro‐2,4,4‐trimethyl glutarate]. The polymerization reached 94% conversion in 5 h to give polymers with controlled number‐average molecular weights (M_n's) in direct proportion to the monomer conversion and narrow molecular weight distributions [MWDs; weight‐average molecular weight/number‐average molecular weight (M_w/M_n) ≤ 1.2]. A poly(methyl methacrylate) with a high molecular weight (M_n ～ 10⁵) and narrow MWD (M_w/M_n ≤ 1.2) was obtained with the system within 10 h. A similarly fast but slightly slower living radical polymerization was possible with n‐Bu₃N, whereas n‐BuNH₂ resulted in a very fast (93% conversion in 2.5 h) and uncontrolled polymerization. These added amines increased the catalytic activity through some interaction such as coordination to the ruthenium center. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 617–623, 2002; DOI 10.1002/pola.10148