New isothermal equation of state of solids applied to high pressures

In the present paper, a new two-parameter inverted equation of state (EOS) is developed which is found to be working very well in the high-pressure region. To check its success and validity, this EOS has been applied in a number of solids. The computed volume compression is found to be in very good agreement with the experimental data in the whole range of pressure in all the solids. The minimum and the maximum pressure range used in the present study is 0–320 kbar and 0–3000 kbar, respectively.     

Synthesis of 1-beta-D-(5-deoxy-5-iodoarabinofuranosyl)-2-nitroimidazole (beta-IAZA): a novel marker of tissue hypoxia

The present work describes the synthesis of the beta-isomer of 1-alpha-D-(5-deoxy-5-iodoarabinofuranosyl)-2-nitroimidazole (IAZA). Radioiodinated IAZA ((123)I-IAZA) has been extensively studied as a radiopharmaceutical for the diagnosis of regional and/or focal tissue hypoxia in a variety of clinical pathologies. The beta-anomer of IAZA, 1-beta-D-(5-deoxy-5-iodoarabinofuranosyl)-2-nitroimidazole (beta-IAZA, 1), was synthesized via an unconventional route starting from 1-beta-D-(ribofuranosyl)-2-nitroimidazole (AZR), with a change of configuration at the C-2'-position to afford 1-beta-D-(arabinofuranosyl)-2-nitroimidazole (beta-AZA, 7). Nucleophilic iodination of the 5'-O-toluenesulfonyl-2',3'-di-O-acetyl precursor of beta-AZA, 9, followed by deprotection, afforded 1 in satisfactory yield. beta-IAZA (1) was also synthesized from 7 using molecular iodine and triphenylphosphine.     

Synthesis and characterization of ETS-10: supported hollow carbon nano-polyhedrons nanosorbent for adsorption of krypton at near ambient temperatures

Hollow carbon nano-polyhedrons (HCNPHs) supported on Engelhard Titanosilicate-10 (ETS-10) were synthesized by wet impregnation technique using tetrahydrofuran as a solvent. Synthesized HCNPHs/ETS-10 nanosorbent was characterized by X-ray diffraction, Raman spectra, N₂-adsorption–desorption isotherm, BET surface area, and scanning electron microscopy to confirm the morphology and uniformity of carbon particles ranging from 50 to 70 nm in diameter. Sorption characteristics of this nanosorbent for krypton at various carbon loadings were determined using a bench-scale column apparatus. The dynamic sorption capacity of HCNPHs/ETS-10 nanosorbent calculated from the breakthrough curve, 0.75 mmol/kg, which was ~15 % higher than for that of activated carbon. The effect of temperature on the adsorption capacity was studied between 263–293 K. Operational capacity of the nanosorbent was found to be 0.45 mmol/kg at 263 K. The experimental results indicate that 10 wt% HCNPHs/ETS-10 nanosorbent showed promising results for krypton adsorption, indicating its potential as an economical and active sorbent for krypton removal from the off-gas streams resulting from operations for recycle of used nuclear fuel.     

Towards a queueing-based framework for in-network function computation

We seek to develop network algorithms for function computation in sensor networks. Specifically, we want dynamic joint aggregation, routing, and scheduling algorithms that have analytically provable performance benefits due to in-network computation as compared to simple data forwarding. To this end, we define a class of functions, the Fully-Multiplexible functions, which includes several functions such as parity, MAX, and kth-order statistics. For such functions we characterize the maximum achievable refresh rate of the network in terms of an underlying graph primitive, the min-mincut. In acyclic wireline networks we show that the maximum refresh rate is achievable by a simple algorithm that is dynamic, distributed, and only dependent on local information. In the case of wireless networks we provide a MaxWeight-like algorithm with dynamic flow-splitting, which is shown to be throughput-optimal.     

Creatinine sensor based on a molecularly imprinted polymer-modified hanging mercury drop electrode

Molecularly imprinted polymers (MIP) have been elucidated to work as artificial receptors. In our present study, a MIP was applied as a molecular recognition element to a chemical sensor. We have constructed a creatinine sensor based on a MIP layer selective for creatinine and its differential pulse, cathodic stripping voltammetric detection (DPCSV) on a hanging mercury drop electrode (HMDE). The creatinine sensor was fabricated by the drop coating of dimethylformamide (DMF) solution of a creatinine-imprinted polymer onto the surface of HMDE. The modified-HMDE, preanodised in neutral medium at +0.4 V versus Ag/AgCl for 120 s, exhibited a marked enhancement in DPCSV current in comparison to the less anodised (≤+0.3 V) HMDE. The creatinine was preconcentrated and instantaneously oxidised in MIP layer giving DPCSV response in the concentration range of 0.0025-84.0 μg mL⁻¹ [detection limit (3σ) 1.49 ng mL⁻¹]. The sensor was found to be highly selective for creatinine without any response of interferents viz., NaCl, urea, creatine, glucose, phenylalanine, tyrosine, histidine and cytosine. The non-imprinted polymer-modified electrode did not show linear response to creatinine. The imprinting factor as high as 9.4 implies that the imprinted polymer exclusively acts as a recognition element of creatinine sensor. The proposed procedure can be used to determine creatinine in human blood serum without any preliminary treatment of the sample in an accurate, rapid and simple way.     

Ultratrace Analysis of Dopamine Using a Combination of Imprinted Polymer-Brush-Coated SPME and Imprinted Polymer Sensor Techniques

A combination approach in solid-phase microextraction, based on a molecularly imprinted polymer-brush coating on an optical fiber coupled with a complementary molecularly imprinted polymer sensor, has been adopted for isolation, preconcentration, and analysis of dopamine at ultratrace levels in highly dilute aqueous samples. This combination enabled enhanced (up to 8.5-fold) preconcentration of the analyte, which is appropriate for achieving a stringent detection limit in clinical diagnosis of several neurodegenerative diseases. The detection limit of dopamine in biological samples was 0.018 ng mL^?1 with a relative standard deviation less than 2.1% and without any non-specific contributions.     

Three component tandem reactions involving protected 2-amino indoles, disubstituted propargyl alcohols, and I2/ICl: iodo-reactant controlled synthesis of dihydro-α-carbolines and α-carbolines via iodo-cyclization/iodo-cycloelimination

Two simple, highly efficient three component tandem reactions for the synthesis of diversified N^aN^b di-carbamate-4,9-dihydro-3-iodo-α-carbolines and N^a-carbamate-3-iodo-α-carbolines have been described. The strategy involves one-pot condensation of bis-carbamate protected 2-amino indoles with disubstituted propargyl alcohols and I₂/ICl. The salient feature of the reaction involves iodocyclo-elimination of N^b-linked carbamate under mild condition in the final step.     

Copolymers comprising 2,7-carbazole and bis-benzothiadiazole units for bulk-heterojunction solar cells

On the basis of theoretical considerations of the intramolecular charge transfer (ICT) effect, we have designed a series of donor (D)–acceptor (A) conjugated polymers based on bis‐benzothiadiazole (BBT). A PPP‐type copolymer of electron‐rich 2,7‐carbazole (CZ) and electron‐deficient BBT units poly[N‐(2‐decyltetradecyl)‐2,7‐carbazole‐co‐7,7′‐{4,4′‐bis‐(2,1,3‐benzothiadiazole)}] ( PCZ‐BBT ), a PPV‐type copolymer poly[N‐(2‐decyltetradecyl)‐2,7‐carbazolevinylene‐co‐7,7′‐{4,4′‐bis‐(2,1,3‐benzothiadiazolevinylene)}] ( PCZV‐BBTV ), and a tercopolymer based on carbazole, thiophene, and BBT poly[N‐(2‐decyltetradecyl)‐2,7‐(di‐2‐thienyl)carbazole‐co‐7,7′‐{4,4′‐bis‐(2,1,3‐benzothiadiazole)}] ( PDTCZ‐BBT ) have been synthesized to understand the influence of BBT acceptor structure and linkage on the photovoltaic characteristics of the resulting materials. Both the HOMO and LUMO of the resulting polymers are found to be deeper‐lying than those of benzothiadiazole‐based polymers. The measured electrochemical band gaps (eV) are in the following order: PDTCZ‐BBT (1.65 eV) < PCZV‐BBTV (1.69 eV) < PCZ‐BBT (1.75 eV). All the polymers provide a photovoltaic response when blended with a fullerene derivative as an electron acceptor. The best cell reaches a power conversion efficiency of 2.07 % estimated under standard solar light conditions (AM1.5G, 100 mW cm^?2). We demonstrate for the first time that BBT‐based polymers are promising materials for use in bulk‐heterojunction solar cells.