Nonlinear modelling and control of a common rail injection system for diesel engines

Modern trends in designing mechatronic systems call for a synergic design of the separated subsystems (mechanic, electronic parts, control modules, etc.) concurring to the overall performance. Following this point of view, this paper presents a control oriented model and a nonlinear control design for a Common Rail injection system. First a model is developed, which is tuned in a virtual simulation environment, representing the injection system in details in a reliable replication of reality. Then a sliding mode control is developed. Both the model of the injection process and of the control law are validated by a virtual detailed simulation environment. The prediction capability of the model and the control efficiency are clearly shown.     

Determination of oxytetracycline, tetracycline, and chlortetracycline in milk by liquid chromatography with postcolumn derivatization and fluorescence detection

A multiresidue method for isolation and liquid chromatographic determination of oxytetracycline (OTC), tetracycline (TC), and chlortetracycline (CTC) in milk is presented. The sensitivity of the method is adequate to meet the needs of regulatory agencies. The European Community established 100 micrograms/kg as the maximum residue limit (MRL) in milk for TC, CTC, and OTC. Recoveries exceeded 80% for all tetracyclines at all levels, with good precision. Correlation coefficients of standards curves for individual tetracyclines isolated from fortified samples ranged from 0.991 for CTC to 0.998 for OTC. Other antibiotics that might interfere with analysis did not interfere with elution times of OTC, TC, and CTC. The procedure is rapid, precise, and quantitative and requires minimal preparation and minimal use of organic solvents. It can be applied to routine surveillance programs. We can prepare 10 samples for analysis in about 1.45 h.     

Estimation of precision and efficiency mass transfer steps for the determination of pesticides in vegetables aiming at the expression of results with reliable uncertainty

A 'bottom-up' approach for the expression of results obtained from analytical methods that include analytical steps with recovery inherently different from 100% [mass transfer steps (MTS): extraction, evaporation, clean-up procedures, digestion, etc.] is presented. The estimation of the combination of all MTS uncertainty involves the comparison of the experimental dispersion of replicated analyses of spiked samples with the estimation of the uncertainty obtained for the combination of all uncertainty sources except MTS ones ('incomplete' estimation). The estimation of MTS uncertainty by difference is performed after evaluating the statistical difference between the 'incomplete' estimation and the experimental dispersion (F-test). When the two estimations are statistically equivalent, the MTS uncertainty is considered to be negligible in relation to the other sources budget. The assumption of constancy of MTS performance within the analytical range is tested through single analyses at several concentration levels and is evaluated by the inclusion of the expected values at the intervals resulting from the combination of the MTS uncertainty estimation performed at one concentration level and the 'incomplete' estimation. The developed methodology can also be useful for method optimisation and validation and for the detection of small trends in results. The determination of pesticides in sweet peppers by GC-NPD was used to explore the above concepts.     

Y-shaped two-photon absorbing molecules with an imidazole-thiazole core

Two new classes of two-photon absorbing Y-shaped molecules have been developed to possess an imidazole-thiazole core and a stilbene-type conjugation pathway with either nitro or sulfonyl as terminal electron-accepting group.     

Fractal relaxed Dirichlet problems

Given aself similar fractal K ? ? ⁿ of Hausdorff dimension α>n?2, andc ₁>0, we give an easy and explicit construction, using the self similarity properties ofK, of a sequence of closed sets? _h such that for every bounded open setΩ?? ⁿ and for everyf ∈ L²(Ω) the solutions to $$\left\{ \begin{gathered} - \Delta u_h = f in \Omega \backslash \varepsilon _h \hfill \\ u_h = 0 on \partial (\Omega \backslash \varepsilon _h ) \hfill \\ \end{gathered} \right.$$ converge to the solution of the relaxed Dirichlet boundary value problem $$\left\{ \begin{gathered} - \Delta u + uc_1 \mathcal{H}_{\left| K \right.}^\alpha = f in \Omega \hfill \\ u = 0 on \partial \Omega \hfill \\ \end{gathered} \right.$$ (H _∣ ^α denotes the restriction of the α-dimensional Hausdorff measure toK). The condition α>n?2 is strict.     

Anaerobic reduction of a sulfonated azo dye, Congo Red, by sulfate-reducing bacteria

The capacity for anaerobic decolorization of a sulfonated azo dye, Congo Red, by a strain of a sulfate-reducing bacterium was evaluated. After optimizing the growth rate of the bacteria on a simple carbon source and terminal electron acceptor pair, lactate and sulfate, respectively, the effect of the dye concentration on their growth rate was analyzed. The decolorization rate was affected by the dye concentration in the growth medium. The azo-bond cleavage mechanism of reductive decolorization with the formation of benzidine was consistent with the results, as this metabolite was identified by high-performance liquid chromatography. Several fractions of the culture medium, including lysed cell extracts, were examined for the capacity to reduce the azo dye. This reduction capacity was found in the culture medium in which the cells had previously grown. The results showed that the mechanism of reductive decolorization of this sulfonated azo dye was extracellular and nonenzymatic, consistent with the production of sulfide anion by the microorganisms while growing on lactate and sulfate. The sulfide anions were the cause of the reduction leading to the disappearance of color in the medium. To increase the rate of decolorization, the presence of ferrous ion was also necessary together with the lactate and sulfate substrates.     

Detection of a stable nitroxide during chemical depolymerization of heparin

The use of low-molecular-weight heparins (LMWHs) has become common, since compared to unfractionated heparin (UFH), they have a much longer plasma half-life and lower incidence of side effects. LMWHs are derived from the depolymerization of UFH, obtained either chemically, physically or enzymatically. We employed electron spin resonance (ESR) spectroscopy to study the depolymerization of UFH by copper in the presence of hydrogen peroxide. A stable nitroxide radical was detected. This could be generated by the hydroxyl radical attack either to the N-SO⁻₃ group or to free amino groups present in the UFH preparation.     

Exploring intramolecular reactions in complex systems with metadynamics: the case of the malonate anions

We have determined the optimized structures, relative energies and intramolecular reactions for two anionic forms of malonic acid, anion malonate(-1) (HO(2)CCH(2)CO(2)(-)) and malonate(-2) ((-)O(2)CCH(2)CO(2)(-)). For this purpose we employed accurate quantum chemistry calculations using second-order M?ller-Plesset perturbation theory and Density Functional Theory with an aug'-cc-p-VTZ basis set to determine the structures and energies, and a novel metadynamics method based on Car-Parrinello molecular dynamics for the thermal reactions. For both malonates, we found new isomers (keto and enol structures) characterized by CO(2) rotations and intramolecular proton transfers. These proton transfers characterize the keto-enol tautomerism that takes place both in the monoanion and dianion. In all cases, the keto tautomer is the more stable configuration. The metadynamics method allows the system to explore the potential energy surface in a few picoseconds, crossing activation barriers of 20-50 kcal/mol.     

Solubility of 1-Butene in Water and in a Medium for Cultivation of a Bacterial Strain

Solubility measurements of 1-butene in water, from 20 to 50°C and at atmospheric pressure, were carried out using a Ben-Naim/Baer-type apparatus. The experimental results have a precision of about ±0.3%. Using accurate thermodynamic relations, the Ostwald coefficients at the experimental conditions and at infinite dilution, the mole fractions of the dissolved gas at the gas partial pressure of 101.325 kPa and the Henry coefficients at the water vapor pressure were calculated. The mole fraction of dissolved gas were fitted to the Clarke, Glew, and Weiss equation and thermodynamic quantities, standard molar Gibbs energy, entropy, and enthalpy changes, for the process of transferring the 1-butene molecules from the gaseous to the water phase, were computed. Moreover, solubility measurements of 1-butene in an aqueous medium for the cultivation of Xanthobacter Py2 in the same temperature range were also performed at atmospheric pressure. These solubility data are approximately 2.6% lower than those observed in pure water.