Laser spectroscopic investigation of a new precursor-type polyparaphenylenevinylene

Optical, structural and morphological properties of thin films of polyparaphenylenevinylene (PPV) formed by an alkyl sulfinyl precursor route have been studied. Thin films were fabricated on an optical glass and on quartz glass either by spin-coating of the precursor solution or by layer-by-layer deposition using Langmuir–Blodgett technique. PPV precursor films were also spin-coated on gold-coated glass in order to study thin-film optical parameters by surface plasmon spectroscopy. We have been successful in forming about 40 precursor mono layers on quartz glass by Langmuir–Blodgett technique using optimized surface pressure and dipping conditions. After thermal conversion of the precursor layers good quality fluorescent PPV films of yellow colour have been obtained. Optical characterization of the films was carried out by linear absorption and emission spectroscopy, ellipsometry, and surface plasmon spectroscopy. Structural and morphological studies on the thin films were carried out by using X-ray scattering and atomic force microscopy. Wave-guided travelling-wave laser action has been achieved in a PPV film on quartz glass. The sample was transversally pumped with picosecond laser pulses (wavelength 347.15 nm, duration 35 ps). Laser emission occurred at 550 nm for pump pulse energy densities above .     

Formation, isolation and characterization of an AB-biaryl atropisomer of oritavancin

Oritavancin is a semi-synthetic glycopeptide antibiotic which is structurally related to vancomycin. When oritavancin bisphosphate is dried in vacuo with heat, a new compound forms. This new compound is stable only in the solid state and reverts to oritavancin in solution. Highly enriched samples of this compound were obtained by preparative HPLC and the structure of this compound was elucidated by using one and two-dimensional (¹H and ¹³C) NMR spectroscopy in conjunction with computer-assisted molecular modeling. It has been determined that oritavancin adopts a conformation similar to that of vancomycin in solution, while the new compound is the unnatural R-AB-biaryl atropisomer of oritavancin. This is the first observation and isolation of an AB-biaryl atropisomer in an intact member of the vancomycin family of glycopeptide antibiotics.     

Thiol–norbornene materials: Approaches to develop high Tg thiol–ene polymers

The ability to prepare high T_g low shrinkage thiol–ene materials is attractive for applications such as coatings and dental restoratives. However, thiol and nonacrylated vinyl materials typically consist of a flexible backbone, limiting the utility of these polymers. Hence, it is of importance to synthesize and investigate thiol and vinyl materials of varying backbone chemistry and stiffness. Here, we investigate the effect of backbone chemistry and functionality of norbornene resins on polymerization kinetics and glass transition temperature (T_g) for several thiol–norbornene materials. Results indicate that T_gs as high as 94 °C are achievable in thiol–norbornene resins of appropriately controlled chemistry. Furthermore, both the backbone chemistry and the norbornene moiety are important factors in the development of high T_g materials. In particular, as much as a 70 °C increase in T_g was observed in a norbornene–thiol specimen when compared with a sample prepared using allyl ether monomer of analogous backbone chemistry. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5686–5696, 2007     

The total synthesis of coleophomones B, C, and D

Members of the coleophomone family of natural products all possess several intriguing and challenging architectural features, as well as exhibit unusual biological activity. They, therefore, constitute attractive targets for synthesis. In this Article, we describe the total synthesis of coleophomones B (2), C (3), and D (4). The highly strained and congested 11-membered macrocycle of coleophomones B (2) and C (3) was constructed using an impressive olefin metathesis reaction. Furthermore, both of the requisite geometric isomers of the Delta(16,17) within the macrocycle could be accessed from a common precursor, facilitating a divergence that lent the coleophomone B (2)/C (3) synthesis an unusually high degree of efficiency. The synthesis of coleophomone D (4) confirmed that it exists as a dynamic mixture of isomeric forms with a different aromatic substitution pattern from the other family members.     

Synthesis, Characterization, and Bonding of Two New Heteropolychalcogenides: alpha-CsCu(S(x)()Se(4-x)) and CsCu(S(x)()Se(6-x))

The Cs-Cu-Q (Q = S, Se) system has been investigated using copper metal, cesium chloride, and alkali-metal polychalcogenide salts under mild hydrothermal reaction conditions. Heteropolychalcogenide salts and mixtures of known polysulfide and polyselenide salts have been used as reagents. The reaction products contain the alpha-CsCuQ(4) and CsCuQ(6) structures. The alpha-CsCuQ(4) phase exhibits a smooth transition in lattice parameters from the pure sulfur to the pure selenium phases, based on Vegard's law. The CsCuQ(6) phase has been prepared as the pure sulfur analog and a selenium rich analog. The single-crystal structures of the disordered compounds alpha-CsCuS(2)Se(2) (P2(1)2(1)2(1), Z = 4, a = 5.439(1) ?, b = 8.878(2) ?, c = 13.762(4) ?) and CsCuS(1.6)Se(4.4) (P&onemacr;, Z = 2, a = 11.253(4) ?, b = 11.585(2) ?, c = 7.211(2) ?, alpha = 92.93 degrees, beta = 100.94 degrees, gamma = 74.51 degrees ) have been solved using a correlated-site occupancy model. These disordered structures display a polychalcogenide geometry in which the sulfur atoms prefer positions that are bound to copper. The optical absorption spectra of these materials have been investigated. The optical band gap varies as a function of the sulfur-selenium ratio. Extended Hückel crystal orbital calculations have been performed to investigate the electronic structure and bonding in these compounds in an attempt to explain the site distribution of sulfur and selenium.     

Relaxation processes in room temperature ionic liquids: the case of 1-butyl-3-methyl imidazolium hexafluorophosphate

A detailed investigation on the nature of the relaxation processes occurring in a typical room temperature ionic liquid (RTIL), namely, 1-butyl-3-methyl imidazolium hexafluorophosphate ([bmim][PF(6)]), is reported. The study was conducted using both elastic and inelastic neutron scattering over a wide temperature range from 10 to 400 K, accessing the dynamic features of both the liquid and glassy amorphous states. In this study, the inelastic fixed energy scan technique has been applied for the first time to this class of materials. Using this technique, the existence of two relaxation processes below the glass transition and a further diffusive process occurring above the glass-liquid transition are observed. The low temperature processes are associated with methyl group rotation and butyl chain relaxation in the glassy state and have been modeled in terms of two Debye-like, Arrhenius activated processes. The high temperature process has been modeled in terms of a Kohlraush-Williams-Watts relaxation, with a distinct Vogel-Fulcher-Tamman temperature dependence. These results provide novel information that will be useful in rationalizing the observed structural and dynamical behavior of RTILs in the amorphous state.     

High-resolution photoelectron spectroscopy through deconvolution

A new iterative deconvolution algorithm for the development of very high resolution Hc(I)-excited photoelectron spectra of gases is presented. The algorithm accepts as input a medium-resolution spectrum and an instrument function obtained by scanning intrinsically narrow line (e.g. the Ar²P_3/2 line) under conditions identical to those used to acquire the medium resolution spectrum. The deconvolved partial spectrum of an O₂H₂O mixture is presented as a test case prior to presentation of results for three nitrogen lines. For comparison purposes directly obtained high-resolution spectra of the nitrogen lines are included. The shapes of the nitrogen lines are discussed within the framework of a one-center expansion theory of photoionization. The conditions under which deconvolution can be profitably applied are briefly discussed and an attempt is made to establish the deconvolution (contrary to still popular belief) is not in any way equivalent to curve fitting.     

Automated multi-attribute method sample preparation using high-throughput buffer exchange tips

Rationale

The multi-attribute method (MAM) has become a valuable mass spectrometry (MS)-based tool that can identify and quantify the site-specific product attributes and purity information for biotherapeutics such as monoclonal antibodies (mAbs) and fusion molecules in recent years. As we expand the use of the MAM at various stages of drug development, it is critical to enhance the sample preparation throughput without additional chemical modifications and variability.

Methods

In this study, a fully automated MAM sample preparation protocol is presented, where rapid desalting in less than 15 minutes is achieved using miniaturized size-exclusion chromatography columns in pipette tips on an automated liquid handler. The peptide samples were analyzed using an electrospray ionization (ESI) orbitrap mass spectrometer coupled to an ultra-high-performance liquid chromatography (UHPLC) system with a dual column switching system.

Results

No significant change was observed in product attributes and their quantities compared with manual, low-artifact sample preparation. The sample recovery using the buffer exchange tips was greatly enhanced over the manual spin cartridges while still demonstrating excellent reproducibility for a wide variety of starting sample concentrations. Unlike a plate desalting system, the individual columns provide flexibility in the number of samples prepared at a time and sample locations within plates.

Conclusions

This automated protocol enables the preparation of up to 96 samples with less “at-bench” time than the manual preparation of a smaller batch of samples, thereby greatly facilitating support of process development and the use of the MAM in quality control.

     

Separation and quantitation of fatty acids by high-performance liquid chromatography

To facilitate the determination of the fatty acid composition of tissues and the investigation of fatty acid metabolism, we developed a method for the rapid separation by high-performance liquid chromatography and quantitation (by ultraviolet light absorption) of p-bromophenyl esters of fatty acids which vary in chain length from 10 to 22 carbon atoms. The utility of the method was demonstrated by evaluating the fatty acid composition of human uterine decidua vera tissue and human endometrial stromal cells that are maintained in monolayer culture.