Mercury removal from aqueous solution and flue gas by adsorption on activated carbon fibres

The use of two activated carbon fibres, one laboratorial sample prepared from a commercial acrylic textile fibre and one commercial sample of Kynol^®, as prepared/received and modified by reaction with powdered sulfur and H₂S gas in order to increase the sulfur content were studied for the removal of mercury from aqueous solution and from flue gases from a fluidized bed combustor. The sulfur introduced ranged from 1 to 6 wt.% depending on the method used. The most important parameter for the mercury uptake is the type of sulfur introduced rather than the total amount and it was found that the H₂S treatment of ACF leads to samples with the highest mercury uptake, despite the lower sulfur amount introduced. The modified samples by both methods can remove HgCl₂ from aqueous solutions at pH 6 within the range 290-710 mg/g (ACF) which can be favourably compared with other studies already published. The use of a filter made with an activated carbon fibre modified by powdered sulfur totally removed the mercury species present in the flue gases produced by combustion of fossil fuel.     

Ferromagnetic spin alignment in head-to-tail coupled oligo(1, 4-phenyleneethynylene)s and Oligo(1,4-phenylenevinylene)s bearing pendant p-phenylenediamine radical cations

The intramolecular and long-range ferromagnetic coupling between p-phenylenediamine radical cations in head-to-tail coupled oligo(1, 4-phenyleneethynylene)s and oligo(1,4-phenylenvinylene)s between neighbors and next-nearest neighbors is described. UV/vis/near-IR experiments show that the radical cations are localized in the pendant p-phenylenediamine units of the conjugated oligomers. The ESR spectra of these oligo(1,4-phenyleneethynylene) and oligo(1, 4-phenylenvinylene) di(radical cation)s are consistent with those of a triplet state. A linear behavior is observed for the doubly integrated ESR intensity of the DeltaM(s) = +/-1 and DeltaM(s) = +/-2 signals with the inverse temperature (I approximately 1/T), consistent with Curie's law. This behavior indicates a triplet ground-state diradical with a large triplet-singlet energy gap or possibly a degeneracy of singlet and triplet states.     

Supramolecular phthalocyanine dimers based on the secondary dialkylammonium cation/dibenzo-24-crown-8 recognition motif

[formula: see text] New unsymmetrically substituted DB24C8-phthalocyanines, which are able to form complexes with suitable dialkylammonium cations, have been prepared. These complexes most probably have a pseudorotaxane geometry.     

Adsorption of toluene and toluene–water vapor mixture on almond shell based activated carbons

The aim of work is to study the adsorption of a common volatile organic compound such as toluene using activated carbons prepared by chemical activation with phosphoric acid of a lignocellulosic precursor, almond shell, under different conditions. The Impregnation ratio, temperature and time of activation were modified to obtain activated carbons with different characteristics. Regarding the characteristics of the activated carbons, the effects of porous structure and surface chemistry on the toluene adsorption capacity from toluene isotherms have been analysed. Results show that the control of properties of the activated carbons, particularly porous structure, highly dependent on the preparation conditions, plays a decisive role on the toluene adsorption capacity of the activated carbons. Concerning the experiments of toluene adsorption conducted in dynamic mode, activated carbons prepared at low temperatures of activation show higher breakthrough times than those obtained for activated carbons prepared at higher activation temperatures. The amount of toluene adsorbed in presence of water vapor in the gas stream lead to a decrease ranging from 33 to 46 % except for carbons prepared at higher temperatures activated that show only a slight decrease in the amount of toluene adsorbed. Activated carbons can be regenerated with soft heat treatment showing a slight decrease in the adsorption capacity. The high toluene adsorption capacities as well as the high breakthrough times obtained in presence of water vapor make these activated carbons suitable for commercial applications.