ParaHydrogen Polarized Ethyl-[1-13C]pyruvate in Water,a Key Substrate for Fostering the PHIP-SAH Approach to Metabolic Imaging

An efficient synthesis of vinyl-[1-¹³C]pyruvate has been reported, from which ¹³C hyperpolarized (HP) ethyl-[1-¹³C]pyruvate has been obtained by means of ParaHydrogen Induced Polarization (PHIP). Due to the intrinsic lability of pyruvate, which leads quickly to degradation of the reaction mixture even under mild reaction conditions, the vinyl-ester has been synthesized through the intermediacy of a more stable ketal derivative. ¹³C and ¹H hyperpolarizations of ethyl-[1-¹³C]pyruvate, hydrogenated using ParaHydrogen, have been compared to those observed on the more widely used allyl-derivative. It has been demonstrated that the spin order transfer from ParaHydrogen protons to ¹³C, is more efficient on the ethyl than on the allyl-esterdue to the larger J-couplings involved. The main requirements needed for the biological application of this HP product have been met, i. e. an aqueous solution of the product at high concentration (40 mM) with a good ¹³C polarization level (4.8 %) has been obtained. The in vitro metabolic transformation of the HP ethyl-[1-¹³C]pyruvate, catalyzed by an esterase, has been observed. This substrate appears to be a good candidate for in vivo metabolic investigations using PHIP hyperpolarized probes.     

Derivatives of pentamidine designed to target the Leishmania lipophosphoglycan

The Leishmania lipophosphoglycan (LPG) is the most abundant cell surface glycoconjugate of a family of infectious protozoa. Pentamidine, a common drug used in the treatment of Leishmania infections, has been modified with boronic acids so that it might bind more selectively to the phosphodisaccharide repeating unit of the LPG. This could serve to target the drug to the protozoan surface and increase its efficacy in vivo.     

Determination of delta 9-tetrahydrocannabinol in pharmaceutical vehicles by high-performance liquid chromatography

A procedure for the determination of delta 9-tetrahydrocannabinol (delta 9-THC) in the presence of its degradation products in pharmaceutical vehicles by high-performance liquid chromatography (HPLC) is described. The method compares favorably with a standard gas-liquid chromatographic procedure used for the analysis of delta 9-THC in sesame oil USP. The HPLC method is suitable for quantitating delta 9-THC in the presence of several pharmaceutical vehicles and excipients including: sesame oil USP, polyvinylpyrrolidone, Emulphor EL620 and Cremophor EL. Extractions are not required and samples require little preparation. Only the addition of an internal standard in an appropriate solvent is necessary before injection. The procedure has been applied to stability studies of delta 9-THC in various pharmaceutical vehicles.     

Comparison of formats for the development of fiber-optic biosensors utilizing sol-gel derived materials entrapping fluorescently-labelled protein

The development of fiber-optic biosensors requires that a biorecognition element and a fluorescent reporter group be immobilized at or near the surface of an optical element such as a planar waveguide or optical fiber. In this study, we examined a model biorecognition element-reporter group couple consisting of human serum albumin that was site-selectively labelled at Cys 34 with iodoacetoxy-nitrobenzoxadiazole (HSA-NBD). The labelled protein was encapsulated into sol-gel derived materials that were prepared either as monoliths, as beads that were formed at the distal tip of a fused silica optical fiber, or as thin films that were dipcast along the length of a glass slide or optical fiber. For fiber-based studies, the entrapped protein was excited using a helium-cadmium laser that was launched into a single optical fiber, and emission was separated from the incident radiation using a perforated mirror beam-splitter, and detected using a monochromator-photomultiplier tube assembly. Changes in fluorescence intensity were generated by denaturant-induced conformational changes in the protein or by iodide quenching. The analytical parameters of merit for the different encapsulation formats, including minimum protein loading level, response time and limit-of-detection, were examined, as were factors such as protein accessibility, leaching and photobleaching. Overall, the results indicated that both beads and films were suitable for biosensor development. In both formats, a substantial fraction of the entrapped protein remained accessible, and the entrapped protein retained a large degree of conformational flexibility. Thin films showed the most rapid response times, and provided good detection limits for a model analyte. However, the entrapment of proteins into beads at the distal tip of fibers provided better signal-to-noise and signal-to-background ratios, and required less protein for preparation. Hence, beads appear to be the most viable method for interfacing of proteins to optical fibers.     

Rigidified calixarenes bearing four carbamoylmethylphosphineoxide or carbamoylmethylphosphoryl functions at the wide rim

Conformationally rigidified tetraCMPO derivatives have been prepared from calix[4]arene bis(crown ether) 4a in which adjacent oxygens are bridged at the narrow rim by two diethylene glycol links. Acylation of the tetraamine 4c with the CMPO-active ester 5b gave the tetraphosphine oxide 6a, while the tetraphosphinate 6b and the tetraphosphonate 6c were obtained by Arbuzov reaction of tetrabromoacetamido derivative 7 with PhP(OEt)2 or P(OEt)3. The extraction ability of these CMPO derivatives was checked for selected lanthanides and actinides and compared with the analogous compounds 1b, 10b and 10d derived from calix[4]arene tetrapentyl ether. All rigidified bis(crown ether) ligands are more effective extractants than their pentyl ether counterparts and require only 1/10 of the concentration (cL= 10 4M) to obtain the same distribution coefficients, while with CMPO itself a 2,000-fold concentration is necessary. This could be a consequence of a better preorganisation of the ligating functions owing to the rigidity which on the other hand did not change the observed selectivity for americium (DAm/DEu=9-19) and for light lanthanides over heavy ones. NMR relaxivity titration curves show that the complex of Gd3+ with ligand 6a is highly oligomerised in anhydrous acetonitrile over a large range of ligand:metal concentration ratios. Nuclear magnetic relaxation dispersion (NMRD) profiles also showed that large oligomers were formed, and their mean tumbling times were deduced from the Solomon-Bloembergen-Morgan equations. The NMR spectra of dia- and paramagnetic lanthanide complexes with 6a agreed with the presence of two conformers with an elongated calix[4]arene skeleton in which the distances between opposite methylene groups are different. Contrary to what was observed with ligand 2a, the addition of nitrate ions does not labilize the metal complexes, presumably because of the rigidification effect of the ether bridges. Single-crystal X-ray structures were obtained for the active ester 5b and for diphenylphosphorylacetic acid 5a.     

Application of a simple high-performance liquid chromatographic method for the determination of melphalan in the presence of its hydrolysis products

A procedure for the separation and quantitation of melphalan (L-PAM) and its hydrolysis products by high-performance liquid chromatography is described. The hydrolysis of L-PAM at 25 +/- 0.1 degrees and 41 +/- 0.1 degrees was studied between pH 3.0 and 9.0. The pattern of hydrolysis suggested that L-PAM decomposes via two consecutive pseudo first-order reactions. Pseudo first-order rate constants (k1) were determined for the disappearance of L-PAM at various pH values in buffered solutions and in a formulated product. At both temperatures L-PAM solutions were found to be most stable at low pH. Chloride ion was found to reduce the rate of hydrolysis.     

Gadolinium‐Decorated Silica Microspheres as Redox‐Responsive MRI Probes for Applications in Cell Therapy Follow‐Up

The redox microenvironment within a cell graft can be considered as an indicator to assess whether the graft is metabolically active or hypoxic. We present a redox‐responsive MRI probe based on porous silica microparticles whose surface has been decorated with a Gd‐chelate through a disulphide bridge. Such microparticles are designed to be interspersed with therapeutic cells within a biocompatible hydrogel. The onset of reducing conditions within the hydrogel is paralleled by an increased clearance of Gd, that can be detected by MRI.     

Refined hierarchical kinematics quasi-3D Ritz models for free vibration analysis of doubly curved FGM shells and sandwich shells with FGM core

In this paper, the Ritz minimum energy method, based on the use of the Principle of Virtual Displacements (PVD), is combined with refined Equivalent Single Layer (ESL) and Zig Zag (ZZ) shell models hierarchically generated by exploiting the use of Carrera's Unified Formulation (CUF), in order to engender the Hierarchical Trigonometric Ritz Formulation (HTRF). The HTRF is then employed to carry out the free vibration analysis of doubly curved shallow and deep functionally graded material (FGM) shells. The PVD is further used in conjunction with the Gauss theorem to derive the governing differential equations and related natural boundary conditions. Donnell–Mushtari's shallow shell-type equations are given as a particular case. Doubly curved FGM shells and doubly curved sandwich shells made up of isotropic face sheets and FGM core are investigated. The proposed shell models are widely assessed by comparison with the literature results. Two benchmarks are provided and the effects of significant parameters such as stacking sequence, boundary conditions, length-to-thickness ratio, radius-to-length ratio and volume fraction index on the circular frequency parameters and modal displacements are discussed.     

MWCNTs-ZrO2 as a reusable heterogeneous catalyst for the synthesis of N-heterocyclic scaffolds under green reaction medium

A simple, efficient, and facile heterogeneous multi-walled carbon nanotubes-zirconia nanocomposite (MWCNTs-ZrO₂) has been synthesized using natural feedstock coconut juice (água-de-coco do Ceará). The synthesized catalyst was characterized by Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy, and X-ray photoelectron spectroscopy analysis. The heterogeneous nanocomposite has been used for one-pot synthesis of various N-heterocyclic compounds like pyrazoles, 1,2-disubstituted benzimidazoles, 2-arylbenzazoles, and 2,3-dihydroquinazolin-4(1H)-ones under green reaction medium at room temperature. This novel method has several advantages, such as short reaction time, simple work-up, excellent yield, and green reaction conditions. The catalyst was recycled up to four times without significant loss in catalytic activity.     

Design and Synthesis of a γ1β8‐Cyclodextrin Oligomer: A New Platform with Potential Application as a Dendrimeric Multicarrier

We report the synthesis and characterization of a water‐soluble, star‐shaped macromolecular platform consisting of eight β‐cyclodextrin (β‐CD) units anchored to the narrower rim of a γ‐CD core through bis(triazolyl)alkyl spacers. The efficient synthetic protocol is based on the microwave (MW)‐promoted Cu‐catalyzed 1,3‐dipolar cycloaddition of CD monoazides to CD monoacetylenes. The ligand‐hosting capability of the construct has been assessed by relaxometric titration and nuclear magnetic relaxation dispersion (NMRD) profiling, which showed it to be good, and this was supported by molecular dynamics simulations. To demonstrate the feasibility of obtaining supramolecular structures with high hosting ability, we designed a dimeric platform, formed by joining two nonamers through the γ‐CD cores through a bis(lithocholic acid) linker. With a view to the potential biological applications, cytotoxicity and extent of binding to human serum albumin were assessed. The properties of this dendrimeric multicarrier make it suitable for pharmaceutical and diagnostic purposes, ranging from targeted drug delivery to molecular imaging.