Additions of enantiopure alpha-sulfinyl carbanions to (S)-N-sulfinimines: asymmetric synthesis of beta-amino sulfoxides and beta-alphamino alcohols

The addition of the lithium anions derived from (R)- and (S)-methyl and -ethyl p-tolyl sulfoxides to (S)-N-benzylidene-p-toluenesulfinamide provides an easy access route to enantiomerically pure beta-(N-sulfinyl)amino sulfoxides. Stereoselectivity can be achieved when the configurations at the sulfur atoms of the two reagents are opposite (matched pair), thus resulting in only one diastereoisomer, even for the case in which two new chiral centers are created. The N-sulfinyl group primarily controls the configuration of the carbon bonded to the nitrogen, whereas the configuration of the alpha-sulfinyl carbanion seems to be responsible for the level of asymmetric induction, as well as for the configuration of the new stereogenic C-SO carbon in the reactions with ethyl p-tolyl sulfoxides. An efficient method for transforming the obtained beta-(N-sulfinyl)amino sulfoxides into optically pure beta-amino alcohols, based on the stereoselective non-oxidative Pummerer reaction, is also reported.     

(Z)-3-p-tolylsulfinylacrylonitrile as a chiral dienophile: diels-alder reactions with furan and acyclic dienes

The behavior of (Z)-3-p-tolylsulfinylacrylonitrile (1) as a chiral dienophile has been evaluated from its reactions with furan and acyclic dienes. Electrostatic interactions of the cyano group with the sulfinyl one restrict the conformational mobility around the C-S bond, thus controlling the pi-facial selectivity, which is almost complete in all cases, the approach of the diene from the less-hindered face of the dienophile (that bearing the lone electron pair) in the predominant rotamer being the favored one. The regioselectivity is also completely controlled by the cyano group. Additionally, the reactivity of compound 1 as well as its endo-selectivity are both higher than those observed for the corresponding (Z)-3-sulfinylacrylates, thus proving the potential of sulfinylnitriles as chiral dienophiles.     

Discussion of parameters associated with the ultrasonic solid-liquid extraction for elemental analysis (total content) by electrothermal atomic absorption spectrometry. An overview

Ultrasonic solid-liquid extraction (USLE) of trace metals from biological and environmental samples and its subsequent quantification by electrothermal atomic absorption spectrometry (ET-AAS) is nowadays an emerging methodology in the analytical laboratory. However, this methodology is far from maturity as can be readily demonstrated from the controversial data reported by different workers. In the light of our own experience and a survey of published data, a general approach for USLE-ET-AAS is discussed, taking into account the different variables which affect ultrasonic solid-liquid extraction, namely, the ultrasonic device chosen for ultrasonic extraction (e.g. ultrasonic bath or ultrasonic probe), particle size, acid concentration, sonication time and sonication amplitude, sample mass and analyte-matrix binding.     

Spin-singlet clusters in the ladder compound NaV2O5

The space group of alpha(')-NaV2O5 turns below T(c) = 34 K from Pmmn with all V sites equivalent, into Fmm2 with three independent vanadium sites per layer. This is incompatible with models of charge ordering into V4+ and V5+. Our structure determination indicates that the phase transition consists of a charge ordering with three distinct valence states, formally V4+, V4.5+, and V5+. The singlet formation is not associated with dimerization on the spin ladder, but with the formation of spin clusters. Finally, we ascribe the quadrupling of the c axis to the large polarizability of the V2O5 skeleton.     

Dependence of pulser driving responses on electrical and motional characteristics of NDE ultrasonic probes

Acoustic performance in ultrasonic transmitters can be improved by means of a suitable electrical driving response and matching/tuning networks. It is important to predict this electrical response, but doing so is not easy because it departs notably from the nominal pattern with the loading probes. In practice, the analysis of HV pulser spikes in NDE applications requires fairly complex models in the transient regime and, in addition, non-linear problems could arise, especially in the case of tuned transmitters. In this paper, the most relevant influences of loading characteristics of NDT ultrasonic probes on the pulser electrical driving responses are evaluated in time and frequency domains. Conventional pulse generators and typical NDE pulsers are considered. Driving responses are analysed across commercial ultrasonic probes and, alternatively, across similar purely electrical loads. Distinct influences on pulser responses from electrical and motional sections of the probes are identified. All these aspects are studied on the basis of experimental and computer results.     

A Review of Synthetic Polymer Characterization by Pyrolysis–GC–MS

Pyrolysis–GC with mass spectrometry detection (Py–GC–MSD) study of the thermal degradation products of synthetic polymers is reviewed. Due to the high heating speed, accurate temperature reproducibility and a wide temperature range, Py–GC–MSD has been applied successfully for polymer characterization. Introduction of samples using the pyrolysis carrier gas through the split injection port, followed by sub-ambient cryofocusing of the pyrolysis products, has shown to give reproducible chromatograms (pyrograms). One of the advantages of this method is that all compositions of the polymers and additives can be investigated without any pretreatment, providing important compositional and structural information in a simple way. The method is a convenient method for compositional analysis of complex polymer materials. The aim of this review is to describe the kinds of applications for which Py–GC–MSD has been found to be suitable; to present guidelines for method optimization; to survey innovations that have recently been developed or are currently being researched; to point to problems in our understanding of the pyrograms; and to suggest areas in which research efforts might be most effective in realizing the full potential of this technique.     

Novel small stable gold nanoparticles bearing fluorescent cysteine-coumarin probes as new metal-modulated chemosensors

Emissive molecular probes based on amino acid moieties are very appealing because of their application as new building blocks in peptide synthesis. Two new bioinspired coumarin probes (L1 and L2) were synthesized and fully characterized by elemental analysis, infrared, (1)H NMR, (13)C NMR, UV-vis absorption and emission spectroscopy, matrix-assisted laser desorption-ionization time-of-flight mass spectrometry (MALDI-TOF-MS), lifetime measurements, and X-ray crystal diffraction. Their sensing ability toward alkaline earth, transition, and post-transition metal ions (Ca(2+), Zn(2+), Cd(2+), Cu(2+), Ni(2+), Hg(2+), Ag(+), and Al(3+)) and their acid-base behavior (H(+), OH(-)) were explored in absolute ethanol by absorption and fluorescence spectroscopy. Compound L1 shows a strong complexation constant with the soft metal ions Zn(2+), Cd(2+), and Ag(+). Compound L2 shows a high fluorescence quantum yield, and it could be used as a non-pH-dependent fluorescent biological probe. Very small gold nanoparticles (AuNPs) using compounds L1 and L2 as stabilizers were obtained by using a reductive method and were characterized by UV-vis, light scattering, and transmission electron microscopy (TEM). Dynamic light scattering and TEM studies show that the formation of small nanoparticles is around 4.27 ± 0.64 nm for L1 and around 2.69 ± 0.96 nm for L2. The new stable Cou@AuNPs behaved as supramolecular chemosensors, which have been selective for the heavy element Hg(2+), with a concomitant change of color from pink to dark red/brown and an increase of size up to 100-fold.     

Ultrasonic-assisted enzymatic digestion (USAED) for total elemental determination and elemental speciation: a tutorial

Due to its potential as sample treatment for Analytical Chemistry, the Ultrasonic-Assisted Enzymatic Digestion (USAED) for total elemental determination and elemental speciation is described under the most recent achievements published in literature, focusing on the variables that critically affect the performance of this relatively new sample treatment, such as the type of enzymes or the type of ultrasonic system used for the acceleration of the solid-liquid extraction process. Moreover, analytical chemists are aware of common errors produced in data interpretation concerning USAED. In addition, a guide for the rapid application of this methodology is also provided along with detailed explanations. Finally, future trends regarding USAED are also given and commented.     

New findings for in-gel digestion accelerated by high-intensity focused ultrasound for protein identification by matrix-assisted laser desorption ionization time-of-flight mass spectrometry

New findings in sample treatment based on high-intensity focused ultrasound (HIFU) for protein digestion after polyacrylamide gel electrophoresis separation are presented. The following variables were studied: (i) sample volume; (ii) sonotrode diameter; (iii) previous protein denaturation; (iv) cooling; (v) enzyme concentration; and (vi) protein concentration. Results showed that positive protein identification could be done after protein separation by gel electrophoresis through peptide mass fingerprint (PMF) in a volume as low as 25 microL. The time needed was less than 2 min and no cooling was necessary. The importance of the sonotrode diameter was negligible. On the other hand, protein denaturation before sonication was a trade-off for the success of procedure here described. The protein coverage was raised from 5 to 30%, and the number of peptides matching the proteins was also increased in a percentage ranging 10-100% when the classical overnight treatment is compared with the proposed HIFU procedure. The minimum amount of protein that can be identified using the HIFU sample treatment by matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF-MS) was 0.06 microg. The lower concentration of trypsin successfully used to obtain an adequate protein digestion was 3.6 microg/mL.