Trace analysis of rapamycin in human blood by micellar electrokinetic chromatography

A capillary electrophoretic method with UV detection at 278 nm has been developed for analysis of the immunosuppressant rapamycin (sirolimus) in human blood at low microgram per liter levels. Separation has been achieved in an acidic carrier electrolyte containing sodium dodecylsulfate and 30% (v/v) acetonitrile. For sample clean-up and preconcentration, an off-line solid-phase extraction step using a silica-based reversed-phase material and an on-capillary focussing technique were employed. The latter allows the injection of increased sample volumes without excessive band broadening. Although this new method is less sensitive than existing liquid chromatographic procedures combined with mass spectrometry, it is fully suited to routine analysis of rapamycin in blood from patients treated with this drug. Last but not least the low costs make it an attractive alternative to established methods.     

Metal ion capillary zone electrophoresis with direct UV detection: determination of transition metals using an 8-hydroxyquinoline- 5-sulphonic acid chelating system

The application of capillary zone electrophoresis to the separation and determination of metal ions after the precolumn formation of negatively charged chelates is described. Multi-component mixtures of transition metal complexes with 8-hydroxyquinoline-5-sulphonic acid (HQS) were separated in about 10 min in a fused-silica capillary column with a borate buffer of pH 9.2 at an applied voltage of 15 kV followed by direct UV detection. The capillary pretreatment with an electroosmotic flow modifier, namely a tetraalkylammonium salt, is necessary to achieve resonable migration times of these metal complexes. Incorporating the chelating reagent in the electrophoretic buffer markedly improves the detectability of relatively unstable chelates, such as those of Co(II), Zn(II) and Cd(II), and allows the separation of metal ions that form unstable HQS chelates, such as Mn(II) and alkaline earth metals. The effects of electrophoretic buffer parameters affecting the complexation reaction and migration behaviour are discussed. Linearity of calibration graphs is observed for about three orders of magnitude with sub-ppm detection limits. The applicability of the method to the analysis of real samples is demonstrated.     

Determination of organic acids in food samples by capillary zone electrophoresis

A comprehensive survey of the use of capillary zone electrophoresis for the determination of organic acids in food and beverage samples is presented. The analytes discussed in this paper include low-molecular-mass organic acids, amino acids, vitamin related compounds and free fatty acids.     

Detection techniques in ion analysis: what are our choices?

Trends in detection techniques for ion analysis by ion-exchange chromatography and capillary zone electrophoresis are reviewed. Special attention is paid to conductivity, UV-Vis absorbance, amperometric and potentiometric detection, mass spectrometry (including inductively coupled plasma MS and atmospheric pressure ionization MS) and post-separation reaction detection. Applications reported within the last few years are summarized.     

Determination of low-molecular-mass quaternary ammonium compounds by capillary electrophoresis and hyphenation with mass spectrometry

The determination of quaternary ammonium ions by capillary electrophoresis (CE) is reviewed. The analytes include tetraalkylammonium and alkylbenzyldimethylammonium compounds frequently used as antiseptic and antibacterial agents as well as in various household products, several plant growth regulators and herbicides, by-products in bile acid sequestrants, and a range of anticholinergic drugs. Besides direct and indirect UV detection, hyphenation with electrospray mass spectrometry is particularly suited for quaternary ammonium ions and may lower the detection limits by two orders of magnitude. In comparison with established liquid chromatographic techniques, CE may exhibits superior separation efficiency. Applications in routine analysis have demonstrated that CE is reliable and robust enough to represent a real alternative to chromatography.     

Determination of the Insect Repellent Bayrepel® in Pool and Lake Water by Gas Chromatography after Preconcentration with Solid-Phase Extraction and Stir-Bar-Sorptive Extraction

A method for the determination of the new insect repellent Bayrepel in bathing lakes and public pools is presented. Sample preconcentration is performed either by solid-phase extraction (SPE) or stir bar sorptive extraction (SBSE). Analysis of the enriched analyte using gas chromatography-mass spectrometry (GC-MS) led to almost identical limits of detection (LOD) of 25ngL^–1 for Bayrepel with both extraction methods. Because of the slightly reduced handling effort involved, the method based on preconcentration by SBSE was finally chosen for the analysis of real samples.     

Electrochemical detectors – tailormade techniques for liquid chromatography and capillary electrophoresis?

Electrochemical detectors for liquid chromatography and capillary electrophoresis are reviewed with special emphasis on electrode materials that allow the amperometric detection of otherwise non-electroactive compounds such as aliphatic alcohols, carbohydrates or amino acids. Noble metal electrodes can catalyze the oxidation of aliphatic compounds in alkaline media if multistep potential-time waveforms are employed. Various metal and metal oxide electrodes such as Ni, Cu or Co allow the detection of carbohydrates and similar compounds under constant potential conditions. Metallic copper electrodes operating in an amperometric mode or in a potentiometric mode can also serve as selective detectors for complexing species. A range of applications in combination with chromatography and electrophoresis is summarized. The current state of electrochemical detectors indicates that both amperometric and potentiometric detectors are on the verge of becoming tailormade detectors for micro-separation techniques.     

Identification of polyimide materials using quantitative CE with UV and QTOF‐MS detection

Polyimides (PIs) are a group of widely used synthetic materials that service a variety of different purposes including microelectronics, insulating films and aerospace applications. Depending on the requirements (defined by the particular final product), the actual composition of PIs may show substantial chemical variation. To study this variation in chemical structure, CE‐MS can be employed for the determination of PI composition following chemical degradation of the polymer sample. PI is chemically decomposed to corresponding aromatic diamine and carboxylic acid components using an alkali fusion reaction. Solid polymer samples are fused in a potassium hydroxide melt yielding reaction products that are diluted in acid and can be immediately analysed by CE coupled to a Q/TOF‐MS with quantification performed using conventional UV detection. This approach involves a simple and rapid sample preparation yielding both qualitative and quantitative information regarding the chemical composition of the polymer. Application of the CE‐MS approach is shown for a range of commercially available PI and poly(amide–imide) materials and the results are used to infer the respective chemical compositions.     

Current approaches to trace analysis of pharmaceuticals and personal care products in the environment

A large number of xenobiotics including pharmaceuticals and personal care products are continuously released into the environment. Effluents from sewage treatment plants are well known to be the major source for introduction of pharmaceuticals and personal care products into the aquatic system. In recent years, reliable methods have been established for residue analysis of these pollutants down to low ng/L levels. In this review, the different approaches to their trace determination are reviewed with special attention being paid to sample preparation procedures, state-of-the-art high-performance separation methods hyphenated with mass spectrometry, and immunochemical methods.