Novel fixed‐site–carrier polyvinylamine membrane for carbon dioxide capture

Fixed‐site–carrier membranes were prepared for the facilitated transport of CO₂ by casting polyvinylamine (PVAm) on various supports, such as poly(ether sulfone) (PES), polyacrylonitrile (PAN), cellulose acetate (CA), and polysulfone (PSO). The cast PVAm on the support was crosslinked by various methods with glutaraldehyde, hydrochloric acid, sulfuric acid, and ammonium fluoride. Among the membranes tested, the PVAm cast on polysulfone and crosslinked by ammonium fluoride showed the highest selectivity of CO₂ over CH₄ (>1000). The permeance of CO₂ was then measured to be 0.014 m³ (STP)/(m² bar h) for a 20 μm thick membrane. The effect of the molecular weight of PVAm and feed pressure on the permeance was also investigated. The selectivity increased remarkably with increasing molecular weight and decreased slightly with increased pressure in the range of 1 to 4 bar. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4326–4336, 2004     

Soft vesicles formed by diblock codendrimers of poly(benzyl ether) and poly(methallyl dichloride)

The synthesis of a block codendrimer (g3-PBE-b-g3-PMDC), composed of a third-generation poly(benzyl ether) (PBE) monodendron and an aliphatic polyether (PMDC) monodendron is reported. In THF/diiospropyl ether (1:1) the PMDC block functions as a "hydrophilic" block, while the PBE acts as a "hydrophobic" block. The codendrimer can form interdigitated layers leading to vesicle formation. Tapping mode atomic force microscopy (AFM), dynamic light scattering (DLS), and transmission electron microscopy (TEM) were used to characterize the vesicles. The effect of molecular architecture on the formation of the interdigitated layers and vesicles was studied.     

Determination by X-ray absorption spectroscopy of the Fe-Fe separation in the oxidized form of the hydroxylase of methane monooxygenase alone and in the presence of MMOD

The diiron active site in the hydroxylase of Methylococcus capsulatus (Bath) methane monooxygenase (MMOH) has been studied in the oxidized form by X-ray absorption spectroscopy (XAS). Previous investigations by XAS and X-ray crystallography have identified two different distances (3.0 and 3.4 angstroms) between the two Fe atoms in the dinuclear site. The present study has employed a systematic extended X-ray absorption fine structure (EXAFS) fitting methodology, utilizing known and simulated active site and relevant model structures, to determine unambiguously the Fe-Fe separation in the oxidized form of MMOH. Consistent and unique fits were only possible for an Fe-Fe distance of 3.0 angstroms. This methodology was then applied to study potential changes in the active site local structure in the presence of MMOD, a protein of unknown function in multicomponent MMO. Fe K-edge and EXAFS analyses revealed negligible changes in the diiron site electronic and geometric structure upon addition of MMOD to oxidized MMOH.     

Sulfur K-edge XAS and DFT calculations on [Fe4S4]2+ clusters: effects of H-bonding and structural distortion on covalency and spin topology

Sulfur K-edge X-ray absorption spectroscopy of a hydrogen-bonded elongated [Fe4S4]2+ cube is reported. The data show that this synthetic cube is less covalent than a normal compressed cube with no hydrogen bonding. DFT calculations reveal that the observed difference in electronic structure has significant contributions from both the cluster distortion and from hydrogen bonding. The elongated and compressed Fe4S4 structures are found to have different spin topologies (i.e., orientation of the delocalized Fe2S2 subclusters which are antiferromagnetically coupled to each other). It is suggested that the H-bonding interaction with the counterion does not contribute to the cluster elongation. A magneto-structural correlation is developed for the Fe4S4 cube that is used to identify the redox-active Fe2S2 subclusters in active sites of HiPIP and ferredoxin proteins involving these clusters.     

Crystal structure of a partly self-complementary peptide nucleic acid (PNA) oligomer showing a duplex-triplex network

The X-ray structure of a partly self-complementary peptide nucleic acid (PNA) decamer (H-GTAGATCACT-l-Lys-NH(2)) to 2.60 A resolution is reported. The structure is mainly controlled by the canonical Watson-Crick base pairs formed by the self-complementary stretch of four bases in the middle of the decamer (G(4)A(5)T(6)C(7)). One right- and one left-handed Watson-Crick duplex are formed. The two PNA units C(9)T(10) change helical handedness, so that each PNA strand contains both a right- and a left-handed section. The changed handedness in C(9)T(10) allows formation of Hoogsteen hydrogen bonding between C(9)T(10) and G(4)A(5) of a PNA strand in an adjacent Watson-Crick double helix of the same handedness. Thereby, a PNA-PNA-PNA triplex is formed. The PNA unit A(3) forms a noncanonical base pair with A(8) in a symmetry-related strand of opposite handedness; the base pair is of the A-A reverse Hoogsteen type. The structural diversity of this PNA demonstrates how the PNA backbone is able to adapt to structures governed by the stacking and hydrogen-bonding interactions between the nucleobases. The crystal structure further shows how PNA oligomers containing limited sequence complementarity may form complex hydrogen-bonding networks.     

Spin-free approach for evaluation of electronic matrix elements using character operators of ℒN

A spin-free method is presented for evaluating electronic matrix elements over a spin-independent many-electron Hamiltonian. The spin-adapted basis of configuration state functions is obtained using a nonorthogonal spin basis consisting of projected spin eigenfunctions. The general expressions for the matrix elements are given explicitly, and it is demonstrated how the matrix elements may be obtained simply from the knowledge of the irreducible characters of the permutation group ℒ_N. The presented formulas are very general and may be applied in connection with both spin-coupled valence bond studies and in conventional configuration interaction (CI) methods based on an orthonormal orbital basis. © 1996 John Wiley & Sons, Inc.     

The Effects of Formulation on Imidacloprid Dissipation in Grapes and Vine Leaves and on Required Pre-Harvest Intervals under Lebanese Climatic Conditions

In this study, imidacloprid, a systemic insecticide, currently having a specified European Commission MRL value for vine leaves (2 mg kg⁻¹), was applied on a Lebanese vineyard under different commercial formulations: as a soluble liquid (SL) and water dispersible granules (WDG). In Lebanon, many commercial formulations of imidacloprid are subject to the same critical good agricultural practice (cGAP). It was, therefore, important to verify the variability in dissipation patterns according to matrix nature and formulation type. Random samplings of grapes and vine leaves were performed starting at 2 days until 18 days after treatment. Residue extractions were performed according to the QuEChERS method and the analytical determination using liquid chromatography coupled to tandem mass spectrometry (LC-MS-MS). The SL formulation yielded significantly higher initial deposit than the WDG formulation on grapes and vine leaves. The formulation type did not significantly affect the dissipation rates; the estimated half-lives in grapes and vine leaves were 0.5 days for all imidacloprid formulations. No pre-harvest intervals were necessary on grapes. PHIs of 3.7 days for the SL formulation and 2.8 days for the WDG formulation were estimated on vine leaves. The results showed that the type of formulation and the morphological and physiological characteristics of the matrix had an effect on the initial deposits, and thus residue levels, but not on the dissipation patterns.