Design and synthesis of Ru(II-bipyridyl-containing conjugated polymers

A series of novel π-conjugated polymers containing ruthenium bipyridine complexes was synthesized by a cross-coupling reaction and characterized. These polymers exhibit absorption maxima around 330–350 nm (π-π*) and 460–500 nm metal-to-ligand charge transfer (MLCT), respectively. They are soluble in common organic solvents, and all polymers can be converted into transparent films. We investigated the influence of different donating and acceptor diethynylarenes of the ultraviolet-visible spectra. The oxidation potential, which was measured by cyclic- and square-wave voltametry, showed a typical Ru^2+/3+ exhibited at 1.25 V versus the saturated calomel electrode. The polymers were further characterized with photoluminescence measurements. When excited at 442 nm ( 11a ), the polymer exhibited an emission peak at 690 nm. This peak was attributed to the MLCT states. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 722–732, 2004     

N-Vinyl as N-H protecting group. Synthesis of cyclic imines from N-vinyllactams and organolithium reagents

On reaction with organolithium reagents followed by hydrolysis and distillation, N-vinylpyrrolidone ( 1 ) gives five-membered ring imines 3-8 , whereas N-vinylcaprolactam ( 2 ) gives mixtures of seven-membered ring imines and the corresponding ∈-amino ketones.     

A new general-purpose isothermal microcalorimeter for use at temperatures up to 200 °C

The design and some properties of a new general-purpose isothermal microcalorimeter are reported. The instrument is a twin thermopile heat conduction calorimeter, which is designed for use up to 200 °C. The calorimetric units and surrounding heat sink are suspended inside a hollow aluminium construction, which is thermostated. Above that unit a second thermostated block is positioned and the whole assembly is suspended inside a Dewar vessel. When the instrument is used at room temperature and below, the thermostated units are cooled by use of an insertion Peltier effect cooler. The instrument can be used with a wide range of different reaction vessels (diameter 14 mm). Baseline experiments have been conducted in the temperature range 15-200 °C. Typical values obtained during 10 h periods at 200 °C are ±3 and ±10 nW for the baseline drift and baseline fluctuations, respectively. The heat detection limit, determined by release of electrical energy, is about 2 μJ. Preliminary stability measurements have been conducted at 100 °C on samples of stabilised and non-stabilised polyamide film.     

FLUORESCENCE PROPERTIES OF PORPHYRIN-GLOBIN FROM HUMAN HEMOGLOBIN

Fluorescence excitation and emission spectra, decays, and quantum yields are reported for the porphyrin-globin of hemoglobin (Hb^desFe) in aqueous solution of pH 8, at 4°C. A very weak fluorescence was observed in the UV (maximum at 334 nm), due to tryptophan and tyrosine residues, in addition to the strong porphyrin emission in the visible (maxima at 624 and 692 nm) reported previously. The absorption and fluorescence properties of the porphyrins of Hb^desFe were compared to those for free porphyrin in organic solvents and in aqueous solution. The close similarity of the fluorescence decays and quantum yields in Hb^desFe and in solution indicate the absence of stronger, specific porphyrin-protein interactions; however, slight spectral shifts point to the existence of water molecules in the Hb^desFe porphyrin environment. The fluorescence study also demonstrates the existence of efficient Trp-porphyrin energy transfer of Förster type. The extent of transfer is in satisfactory agreement with the value expected from crystallographic data for hemoglobin. The results are discussed and compared to previous fluorescence studies of hemoglobin and apohemoglobin. An improved method for the preparation of Hb^desFe is reported.     

Microfabrication of stacks of acoustic matching layers for 15 MHz ultrasonic transducers

This paper presents a novel method used to manufacture stacks of multiple matching layers for 15 MHz piezoelectric ultrasonic transducers, using fabrication technology derived from the MEMS industry. The acoustic matching layers were made on a silicon wafer substrate using micromachining techniques, i.e., lithography and etch, to design silicon and polymer layers with the desired acoustic properties. Two matching layer configurations were tested: a double layer structure consisting of a silicon–polymer composite and polymer and a triple layer structure consisting of silicon, composite, and polymer. The composite is a biphase material of silicon and polymer in 2-2 connectivity. The matching layers were manufactured by anisotropic wet etch of a (1 1 0)-oriented Silicon-on-Insulator wafer. The wafer was etched by KOH 40 wt%, to form 83 μm deep and 4.5 mm long trenches that were subsequently filled with Spurr’s epoxy, which has acoustic impedance 2.4 MRayl. This resulted in a stack of three layers: The silicon substrate, a silicon–polymer composite intermediate layer, and a polymer layer on the top. The stacks were bonded to PZT disks to form acoustic transducers and the acoustic performance of the fabricated transducers was tested in a pulse-echo setup, where center frequency, −6 dB relative bandwidth and insertion loss were measured. The transducer with two matching layers was measured to have a relative bandwidth of 70%, two-way insertion loss 18.4 dB and pulse length 196 ns. The transducers with three matching layers had fractional bandwidths from 90% to 93%, two-way insertion loss ranging from 18.3 to 25.4 dB, and pulse lengths 326 and 446 ns. The long pulse lengths of the transducers with three matching layers were attributed to ripple in the passband.     

Amorphous/crystalline silicon heterojunction solar cells with black silicon texture

Excellent passivation of black silicon surfaces by thin amorphous silicon layers deposited with plasma enhanced chemical vapor deposition is demonstrated. Minority charge carrier lifetimes of 1.3 milliseconds, enabling an implied open‐circuit voltage of 714 mV, were achieved. The influence of amorphous silicon parasitic epitaxial growth and thickness, as well as of the texture depth is investigated. Furthermore, quantum efficiency gains for wavelengths above 600 nm, as compared to random textured solar cells, are demonstrated in 17.2% efficient amorphous–crystalline silicon heterojunction solar cells with black silicon texture. (© 2014 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Slow-light enhanced optical detection in liquid-infiltrated photonic crystals

Slow-light enhanced optical detection in liquid-infiltrated photonic crystals is theoretically studied. Using a scattering-matrix approach and the Wigner–Smith delay time concept, we show that optical absorbance benefits both from slow-light phenomena as well as a high filling factor of the energy residing in the liquid. Utilizing strongly dispersive photonic crystal structures, we numerically demonstrate how liquid-infiltrated photonic crystals facilitate enhanced light–matter interactions, by potentially up to an order of magnitude. The proposed concept provides strong opportunities for improving existing miniaturized absorbance cells for optical detection in lab-on-a-chip systems.     

Neuronal integration of dynamic sources: Bayesian learning and Bayesian inference

One of the brain's most basic functions is integrating sensory data from diverse sources. This ability causes us to question whether the neural system is computationally capable of intelligently integrating data, not only when sources have known, fixed relative dependencies but also when it must determine such relative weightings based on dynamic conditions, and then use these learned weightings to accurately infer information about the world. We suggest that the brain is, in fact, fully capable of computing this parallel task in a single network and describe a neural inspired circuit with this property. Our implementation suggests the possibility that evidence learning requires a more complex organization of the network than was previously assumed, where neurons have different specialties, whose emergence brings the desired adaptivity seen in human online inference.     

Sensitivity of a tucuxi (Sotalia fluviatilis guianensis) to airborne sound

Auditory systems of cetaceans are considered highly specialized for underwater sound processing, whereas the extent of their hearing capacity in air is still a point of issue. In this study, the sensitivity to airborne sound in a male tucuxi (Sotalia fluviatilis guianensis) was tested by means of a go/no go response paradigm. Auditory thresholds were obtained from 2 to 31.5 kHz. Compared to the hearing thresholds of other dolphins as well as of amphibian mammals, the sensitivity to airborne sound of the test subject is low from 2 to 8 kHz, with the highest threshold at 4 kHz. Thresholds at 16 and 31.5 kHz reveal a sharp increase in hearing sensitivity. Thus, although not obtained in this study, the upper aerial hearing limit is in the ultrasonic range. A comparison of the present data with the underwater audiogram of the same test subject referred to sound intensity indicates that the sensitivity of Sotalia to underwater sound is generally better than to airborne sound.