Application of microcrystalline cellulose as an efficient and cheap sorbent for the extraction of metoprolol from plasma and wastewater before HPLC–MS/MS determination

A dispersive solid-phase extraction method based on a new sorbent has been performed on plasma and wastewater samples to determine metoprolol by high-performance liquid chromatography–tandem mass spectrometry. In this study, the analyte was adsorbed from the samples onto microcrystalline cellulose as a green and efficient sorbent and then eluted for use in the determination step. In the mass spectrometer, the analyte was detected in the positive mode and selectivity of the analysis was increased by sequential mass analysis through multiple reaction monitoring. All of the effective parameters in the extraction of metoprolol from plasma and wastewater were optimized. Under optimal conditions the method was linear in the ranges of 1–1,000 and 0.1–1,000 ng/ml in plasma and wastewater samples, respectively. The detection limits of the method were 0.30 and 0.03 ng/ml in plasma and wastewater samples, respectively. The data showed that the method provides low detection limit, wide linear range, good precision and high extraction recovery. Finally several plasma and wastewater samples were successfully analyzed using the method. The use of a small amount of a green and inexpensive sorbent and a low volume of plasma without the need for further pretreatment steps are the main advantages of the method.     

Ergodic theory of amenable semigroup actions

In this paper, among other things, we state and prove the mean ergodic theorem for amenable semigroup algebras.     

A portable positron accumulator for antihydrogen formation

A pulsed source of positrons has been developed which may be useful for antihydrogen ( ) formation because it is portable when compared to accelerator-based sources. This positron accumulator uses a Penning-style trap to collect moderated positrons from a radioactive source. The positron pulses may be emitted with repetition rates in the range of 50–1000 Hz, which is appropriate for production schemes involving laser-induced recombination. Bunching techniques may be used to vary the width of the positron pulses over the range 30–120 ns (FWHM) to match the width of the antiproton and/or laser pulses. The efficiency of the accumulator increases from ∼ 10% at 100 Hz to ∼ 50% at 1000 Hz. 250 Hz the efficiency is ∼ 25% and the accumulator has delivered up to 8 e⁺/pulse per mCi of positron activity. This translates into ∼ 1.2 × 10⁵ e⁺/pulse for a 100 Ci⁵⁸Co source.     

Palladium on magnetic Irish moss: A new nano‐biocatalyst for suzuki type cross‐coupling reactions

A novel heterogeneous magnetic palladium nano‐biocatalyst was designed by utilizing Irish moss, a family of sulfated polysaccharides extracted from algae, as a natural biopolymer. This magnetic Irish moss decorated with palladium (Pd–Fe₃O₄@IM) to form a biomagnetic catalytic system was synthesized and well characterized by FT–IR analysis, X‐ray powder diffraction, field emission scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, atomic absorption spectroscopy and transmission electron microscopy. The catalyst was stable to air and moisture and displayed high catalytic activity in ligand‐free Suzuki–Miyaura cross‐coupling reactions conducted under green chemistry reaction conditions. The aromatic ketones are produced by the cross‐coupling reaction between acid chlorides and aryl boronic acid derivatives in high yields.     

Silica-Supported MnII Sites as Efficient Catalysts for Carbonyl Hydroboration,Hydrosilylation, and Transesterification

Manganese, the third most abundant transition-metal element after iron and titanium, has recently been demonstrated to be an effective homogeneous catalyst in numerous reactions. Herein, the preparation of silica-supported Mn^II sites is reported using Surface Organometallic Chemistry (SOMC), combined with tailored thermolytic molecular precursors approach based on Mn₂[OSi(OtBu)₃]₄ and Mn{N(SiMe₃)₂}₂⋅THF. These supported Mn^II sites, free of organic ligands, efficiently catalyze numerous reactions: hydroboration and hydrosilylation of ketones and aldehydes as well as the transesterification of industrially relevant substrates.     

聚乙烯基吡啶高氯酸盐作为高效固体酸催化剂在无溶剂条件下催化醛化学选择性制备二乙酸盐(英文)

Poly(4-vinylpyridinium) perchlorate has been used as a supported,recyclable,environmentally-benign catalyst for the formation of acylals from aliphatic and aromatic aldehydes in good to excellent yields under solvent-free conditions.Notably,the reaction conditions were tolerant of ketones.This methodology offers several distinct advantages,including its operational simplicity and high product yield,as well as being green in terms of avoiding the use of toxic catalysts and solvents.Furthermore,the catalyst can be recovered and reused several times without any loss in its activity.     

1,3-Dibromo-5,5-dimethylhydantoin(DBH)/kaolin:An efficient reagent system for the synthesis of 14-aryl-14H-dibenzo[a,j]xanthenes under solvent-free conditions

1,3-Dibromo-5,5-dimethylhydantoin,has been used as an efficient catalyst for the synthesis of 14-aryl-14H-dibenzo[a,j]xanthenes in the presence of kaolin.All reactions are performed in the absence of solvent in relatively short reaction times in good to high yields.     

Generation and recombination in two-dimensional bipolar transistors

We study the effects of recombination and generation process on the operation of bipolar junction transistor based on two-dimensional materials, and in particular, graphone. Here, we use Shockley–Read–Hall model to study these process. First, we investigate the current–voltage characteristics of a graphone p–n junction considering generation and recombination process. Then, we calculate the estimated changes in current gain, cutoff frequency, and output characteristics of a graphone bipolar junction transistor designed in a recent study.     

Surface characteristics and electrochemical behaviour of sputter-deposited NiTi thin film

Thin nanocrystalline amorphous NiTi film was deposited on Si substrate using DC magnetron sputtering. The as-deposited NiTi thin film was crystallized by heat treatment at 500 °C for 1 h. The crystal structure, surface morphology, microstructure and surface chemistry of the deposited films were studied using X-ray diffraction, atomic force microscopy, scanning electron microscopy and X-ray photoelectron spectroscopy (XPS), respectively. Corrosion behaviour was assessed in Ringer’s solution at 37 °C by open circuit potential (OCP), potentiodynamic polarization and electrochemical impedance spectroscopy as a function of exposure time. OCP values indicate that the tendency for the formation of a spontaneous oxide film is greater for the NiTi thin films than the bulk NiTi. Long time exposure to Ringer’s solution was found to have a great effect on the corrosion behaviour of the samples. Significantly low corrosion current density was obtained for the annealed NiTi film from the potentiodynamic polarization curves indicating a typical passive behaviour, but as-deposited film and bulk NiTi alloy exhibited breakdown of passivity at potentials approximately +1.4 V (vs. SCE). XPS showed that the oxide film formed on the annealed NiTi thin film mainly composed of Ti oxides, and no evidence of Ni was found up to 8.2 nm beneath the top surface, suggesting the excellent corrosion resistance of this sample in Ringer’s solution.