Functional Carbazole Liquid‐Crystal Block Codendrimers with Optical and Electronic Properties

The synthesis and characterisation of a family of block codendrimers consisting of highly versatile mesogenic and carbazole‐containing 2,2‐bis(hydroxymethyl)propionic acid (bis‐MPA) dendrons are reported. The liquid‐crystal behaviour was investigated by means of differential scanning calorimetry, polarised‐light optical microscopy and X‐ray diffraction. Depending on the chemical structure of the constituent dendrons, the codendrimers show lamellar or columnar mesophases. On the basis of the experimental results, models both at the molecular level and in the mesophase are proposed. The physical properties of the block codendrimers derived from the presence of the carbazole moiety in their structure were investigated: photoluminescence in solution and in the mesophase, electrochemical behaviour and hole transport. Electrodeposition of carbazole dendrons afforded a globular supramolecular conformation in which the mesogenic molecular side plays a key role.     

Fluorine containing phosphazene polymers

In this paper we highlighted the synthesis, characterization, and practical exploitation of different types of polyphosphazenes substituted with fluorinated groups. There are several ways in which fluorine atoms can be inserted into polyphosphazenes, all of which leading to different polymers showing a wide range of characteristics. In general it is true that the insertion of fluorine atoms into phosphazene macromolecules leads to an enhancement of the thermal stability, flame resistance, low-temperature elastomericity, and chemical inertness of the phosphazenes obtained. The contribution of Italian research groups to the preparation and exploitation of organic commercial macromolecules grafted onto fluorinated polyphosphazenes is also reviewed.     

Planning District‐Wide Professional Development: Insights Gained From Teachers and Students Regarding Mathematics Teaching in a Large Urban District

This paper describes the mechanism used to gain insights into the state of the art of mathematics instruction in a large urban district in order to design meaningful professional development for the teachers in the district. Surveys of close to 2,000 elementary, middle school, and high school students were collected in order to assess the instructional practices used in mathematics classes across the district. Students were questioned about the frequency of use of various instructional practices that support the meaningful learning of mathematics. These included practices such as problem solving, use of calculators and computers, group work, homework, discussions, and projects, among others. Responses were analyzed and comparisons were drawn between elementary and middle school students' responses and between middle school and high school responses. Finally, fifth‐grade student responses were compared to those of their teachers. Student responses indicated that they had fewer inquiry‐based experiences, fewer student‐to‐student interactions, and fewer opportunities to defend their answers and justify their thinking as they moved from elementary to middle school to high school. In the elementary grades students reported an overemphasis on the use of memorization of facts and procedures and sparse use of calculators. Results were interpreted and specific directions for professional development, as reported in this paper, were drawn from these data. The paper illustrates how student surveys can inform the design of professional development experiences for the teachers in a district.     

Preconcentration of trace antimony in tap and sea water on activated alumina. Determination by graphite furnace atomic absorption spectrometry

Summary A method is described for antimony preconcentration based on retention on a column of activated alumina. Recovery is 80% when no pH-control and 4 mol/l HCl as eluent are used. The preconcentration factor is 400. The method was applied to the determination of antimony in spiked tap and sea water. The analytical performance of the method is discussed.     

Evaluation of a purge-and-trap injection system for capillary gas chromatography-microwave induced plasma-atomic emission spectrometry for the determination of volatile selenium compounds in water

A method is presented for the selective determination of the volatile selenium species dimethylselenide and dimethyldiselenide, using a commercially available purge-and-trap injection system coupled to capillary gas chromatography-microwave induced plasma-atomic emission spectrometry. The efficiency of the purging step was evaluated and the parameters affecting the purge and trap processes were optimized. The method was applied to the determination of volatile selenium compounds in lake water. Relative detection limits of 2ng/l for dimethylselenide and dimethyldiselenide, corresponding to an absolute detection limit of 10 pg, were achieved.     

Preparation and Characterization of Compositions Based on PbO-MgO-Nb2O5 Using the Sol-Gel Method

Lead Magnesium Niobate, Pb(Mg_1/3Nb_2/3)O₃ (PMN), is an important relaxor ferroelectric material. A significant problem exists, however, in the preparation of this material: it is very difficult to prepare pure phase, without the presence of a pyrochlore impurity phase which degrades the dielectric properties. Depending on the processing conditions, the amount of pyrochlore phase varies.Considering the ternary diagram PbO-MgO-Nb₂O₅, different compositions have been prepared by a simple sol-gel method at room temperature using Pb(CH₃COO)₂, Mg(CH₃COO)₂, Nb(OC₂H₅)₅ as precursors. After the heat treatment, the samples obtained were analyzed by XRD and EPMA with the purpose of studying the compositions formed.From the analysis of these results, it seems to be that the appearance of pyrochlore can be related to the reactivity of the MgO and/or the presence of other phases of the binary system PbO-Nb₂O₅. An excess of Pb and Mg is necessary for compositions to be formed near the PMN. The control of the amount of these two elements is very important because an excess of MgO would lead to rich compositions in Mg as a secondary phase.     

Determination of degree of conversion as a function of depth of a photo-initiated dental restoration composite—III application to commercial Prodigy Condensable™

In this third work, we evaluated the degree of conversion (DC) versus depth of dental filling composite named Prodigy Condensable™ using infrared spectroscopy. Confirming previous results, there was a gradual reduction of DC with increasing depth but the composite exhibited extreme values of DC, an upper value (45.9%) on the surface and a lower one (6.1%) at a depth of 5 mm. The composite presented the worst performance among materials studied. The composite formulation was 80% of inorganic fillers and BisfenolA/dimethacrylate (BisGMA) (18%)/triethyleneglycoldimethacrylate (TEGDMA) (2.0%) as monomers. As stated before, type/ratio/viscosity of monomers and type, amount, size and size distribution of fillers all together had an important role in the cure reaction contributing to the final performance of the composite.     

Synthesis and hydrolysis of substituted tetrahydropyrimidinium salts. Behaviour of the degradation products on varying pH

Reaction of 1,2-diaryl-3-methyl-1,4,5,6-tetrahydropyrimidinium iodides 1a-i with alkaline solutions afforded N-aroyl-N-aryl-N'-methyltrimethylenediamines 2a-i . Compounds 2 are stable under acid conditions but in neutral or alkaline media spontaneously rearrange giving N-aroyl-N'-aryl-N-methyltrimethylenediamines 3a-i . Treating compounds 3 with concentrated acids reverse reaction takes place. Kinetic studies were performed on this intramolecular N → N' aroyl transfer over the H_o-pH range -0.9 to 2.30. Compounds 3 undergo acyl transfer to give 2 by a mechanism which involves a change in the rate determining step from formation to acid-catalysed decomposition of a six-membered heterocyclic intermediate on going from H_o to pH values. The existence of maxima in the pH rate profile allow to determine apparent pKa values of the hexahydropyrimidine intermediates which gave good correlation with the Swain F substituent constants. Stability of these heterocycles was also predicted by determination of thermodinamic parameters. Comparisons are made with the behaviour of five-membered heterocyclic intermediates (imidazolidine derivatives) which were studied in an earlier paper.