Ce-promoted Fe–Cu–ZSM-5 catalyst: SCR-NO activity and hydrothermal stability

Research on Chemical Intermediates - Fe–Cu–ZSM-5 and Ce–Fe–Cu–ZSM-5 solids prepared using solid-state ion exchange method (SSIE) were tested in the NH3–SCR of NO...     

Stability of AgIII towards Halides in Organosilver(III) Complexes

The involvement of silver in two-electron Ag^I/Ag^III processes is currently emerging. However, the range of stability of the required and uncommon Ag^III species is virtually unknown. Here, the stability of Ag^III towards the whole set of halide ligands in the organosilver(III) complex frame [(CF₃)₃AgX]⁻ (X=F, Cl, Br, I, At) is theoretically analyzed. The results obtained depend on a single factor: the nature of X. Even the softest and least electronegative halides (I and At) are found to form reasonably stable Ag^III−X bonds. Our estimates were confirmed by experiment. The whole series of nonradiative halide complexes [PPh₄][(CF₃)₃AgX] (X=F, Cl, Br, I) has been experimentally prepared and all its constituents have been isolated in pure form. The pseudohalides [PPh₄][(CF₃)₃AgCN] and [PPh₄][(CF₃)₃Ag(N₃)] have also been isolated, the latter being the first silver(III) azido complex. Except for the iodo compound, all the crystal and molecular structures have been established by single-crystal X-ray diffraction methods. The decomposition paths of the [(CF₃)₃AgX]⁻ entities at the unimolecular level have been examined in the gas phase by multistage mass spectrometry (MSⁿ). The experimental detection of the two series of mixed complexes [CF₃AgX]⁻ and [FAgX]⁻ arising from the corresponding parent species [(CF₃)₃AgX]⁻ demonstrate that the Ag−X bond is particularly robust. Our experimental observations are rationalized with the aid of theoretical methods. Smooth variation with the electronegativity of X is also observed in the thermolyses of bulk samples. The thermal stability in the solid state gradually decreases from X=F (145 °C, dec.) to X=I (78 °C, dec.) The experimentally established compatibility of Ag^III with the heaviest halides is of particular relevance to silver-mediated or silver-catalyzed processes.     

Efficient and green syntheses of novel γ-aminophosphonate and phosphine oxide derivatives

Two synthetic protocols leading to novel γ-aminophosphonate and phosphine oxide derivatives, by reductive amination of γ-phosphonylketones, are reported. The first method involved a two-step procedure. Imine intermediates were first isolated from the p-toluenesulfonic acid-catalyzed reaction of primary amines with γ-ketophosphonates and phosphine oxides, then reduced with NaBH₄ in refluxing ethanol. The second method consists of a one-pot procedure which includes the condensation of γ-ketophosphonates and phosphine oxides with primary amines, in the presence of molecular sieves, followed by reduction with NaBH₄. These methods offer significant advantages over prior reports, such as efficiency, generality, and good yields. Furthermore, they are green protocols avoiding hazardous hydrides and solvents.     

Instant controlled pressure drop extraction of lavandin essential oils: Fundamentals and experimental studies

Détente Instantanée contrôlée (DIC), French for Instant Controlled Pressure Drop, was performed on laboratory apparatus as well as on a pilot plant for proving its feasibility, and identifying the optimized processing conditions and recognizing the energy consumption and the quantity of water used for such an operation. GC–MS and SPME analysis of the extracts and residue material were carried out to assess the extracts and solid residues. The lavandin essential oils obtained by using the new DIC extraction process was studied, modeled and quantitatively and qualitatively compared to the conventional hydrodistillation method. The most important differences between the two essential oils were reflected in the yields, with 4.25 as against 2.3 g EO/100 g of raw matter, and in the extraction time, with 480 s as against some hours for respectively the DIC and the hydrodistillation operations. These differences have been previewed through the fundamental analysis. They can normally explain the great decreasing of energy consumption to be 662 kWh/t of raw material. The amount of water to be added was about 42 kg water/t of raw material.     

An operationally simple,fast and green synthesis of novel γ-hydroxyphosphonate and phosphine oxide derivatives

A green and versatile method for the preparation of γ-hydroxyphosphonate and phosphine oxide derivatives in 5?min, is accomplished through the reduction of γ-phosphonylketones with sodium borohydride supported on alumina, at room temperature, under solvent free conditions.     

Solid-state ion exchange of ammonium heptamolybdate tetrahydrate into ZSM-5 zeolite

Journal of Thermal Analysis and Calorimetry - Thermal decomposition (2 K min?1) of ammonium heptamolybdate tetrahydrate, performed between room temperature and...     

A microwave-assisted and heteropolyacids-catalysed cyclocondensation reaction for the synthesis of 4(3H)-quinazolinones

We have investigated a microwave-assisted synthesis of 4(3H)-quinazolinones by condensation of anthranilic acid, orthoesters (or formic acid) and substituted anilines,using Keggin-type heteropolyacids (H(3)PW(12)O(40).13H(2)O, H(4)SiW(12)O(40).13H(2)O,H(4)SiMo(12)O(40).13H(2)O or H(3)PMo(12)O(40).13H(2)O) as catalysts. We found that the the use of H(3)PW(12)O(40).13H(2)O acid coupled to microwave irradiation allows a solvent-free, rapid (approximately 13min) and high-yielding reaction.     

Effect of the nature of the metal atom on hydrogen bonding and proton transfer to [Cp*MH3(dppe)]: tungsten versus molybdenum

The hydrogen-bonding and proton-transfer pathway to complex [Cp*W(dppe)H(3)] (Cp*=eta(5)-C(5)Me(5); dppe=Ph(2)PCH(2)CH(2)PPh(2)) was investigated experimentally by IR, NMR, UV/Vis spectroscopy in the presence of fluorinated alcohols, p-nitrophenol, and HBF(4), and by using DFT calculations for the [CpW(dhpe)H(3)] model (Cp=eta(5)-C(5)H(5); dhpe=H(2)PCH(2)CH(2)PH(2)) and for the real system. A study of the interaction with weak acids (CH(2)FCH(2)OH, CF(3)CH(2)OH, (CF(3))(2)CHOH) allowed the determination of the basicity factor, E(j)=1.73+/-0.01, making this compound the most basic hydride complex reported to date. A computational investigation revealed several minima for the [CpW(dhpe)H(3)] adducts with CF(3)CH(2)OH, (CF(3))(2)CHOH, and 2(CF(3))(2)CHOH and confirms that these interactions are stronger than those established by the Mo analogue. Their geometries and relative energies are closely related to those of the homologous Mo systems, with the most stable adducts corresponding to H bonding with M-H sites, however, the geometric and electronic parameters reveal that the metal center plays a greater role in the tungsten systems. Proton-transfer equilibria are observed with the weaker proton donors, the proton-transfer step for the system [Cp*W(dppe)H(3)]/HOCH(CF(3))(2) in toluene having DeltaH=(-3.9+/-0.3) kcal mol(-1) and DeltaS=(-17+/-2) cal mol(-1) K(-1). The thermodynamic stability of the proton-transfer product is greater for W than for Mo. Contrary to the Mo system, the protonation of the [Cp*W(dppe)H(3)] appears to involve a direct proton transfer to the metal center without a nonclassical intermediate, although assistance is provided by a hydride ligand in the transition state.     

EGB-promoted electrochemical synthesis of 6-thioxo-[1,3,5]-triazinane-2,4 dione derivatives

A simple method for the synthesis of 6-thioxo-[1,3,5]-triazinane-2,4-dione derivatives was reported. The electrogenerated cyanomethyl base obtained from electroreduction of neat acetonitrile assisted the reaction between thiourea derivatives and alkyl or aryl isocyanate. This protocol had the advantage of giving good yields using mild conditions. The obtained products have been identified by spectroscopic data, mass spectrometry, and high-resolution mass spectra or elemental analysis.     

Synthesis,Structure, and Electrochemical Properties of Sterically Protected Molybdenum Trihydride Redox Pairs: A Paramagnetic “Stretched” Dihydrogen Complex?

Complexes [MoCp(#)(PMe(3))(2)H(3)] (Cp(#)=1,2,4-C(5)H(2)tBu(3), 2 a; C(5)HiPr(4), 2 b) have been synthesized from the corresponding compounds [MoCp(#)Cl(4)] (1 a, 1 b) and fully characterized, including by X-ray crystallography and by a neutron diffraction study for 2 a. Protonation of 2 a led to complex [Mo(1,2,4-C(5)H(2)tBu(3))(PMe(3))(2)H(4)](+) (3 a) in THF and to [Mo(1,2,4-C(5)H(2)tBu(3))(PMe(3))(2)(MeCN)H(2)](+) (4 a) in MeCN. Complex 4 b analogously derives from protonation of 2 b in MeCN, whereas the tetrahydride complex 3 b is unstable. One-electron oxidation of 2 a and 2 b by [FeCp(2)]PF(6) produces the EPR-active 17-electron complexes 2 a(+) and 2 b(+). The former is thermally more stable than the latter and could be crystallographically characterized as the PF(6) (-) salt by X-ray diffraction, providing evidence for the presence of a stretched dihydrogen ligand (H...H=1.36(6) angstroms). Controlled thermal decomposition of 2 a(+) yielded the product of H(2) elimination, the 15-electron monohydride complex [Mo(1,2,4-C(5)H(2)tBu(3))(PMe(3))(2)H]PF(6) (5 a), which was characterized by X-ray crystallography and by EPR spectroscopy at liquid He temperature. The compound establishes an equilibrium with the solvent adduct in THF. An electrochemical study by cyclic voltammetry provides further evidence for a rapid H(2) elimination process from the 17-electron complexes. In contrast to the previously investigated [MoCp*(dppe)H(3)](+) system (dppe=1,2-bis(diphenylphosphino)ethane; Cp*=pentamethylcyclopentadienyl), the decomposition of 2 a(+) by H(2) substitution with a solvent molecule appears to follow a dissociative pathway in MeCN.