T-x-y diagram of the Ni-Bi-Se system

Some polythermal sections of the Ni-Bi-Se system have been investigated by DTA, X-ray powder diffraction, microstructural analysis, and microhardness measurements. The liquidus surface has been constructed for this system. The compounds NiBi₂Se₄ and Ni₃Bi₂Se₂ are formed by dystectic reactions and melt at 1088 and 980 K, respectively. The regions of primary and joint phase crystallization have been determined. A commutation of Bi₂Se₃-based thermoelements with a metal nickel bus-bar has been proposed.     

Interactions of surface states of copper with transition metals and cesium

The pseudopotential augmented-plane-wave method was used to study the surface structure of thin copper films with monolayers of Co, Ni, and Cs. Local densities of electron states, distributions of charge densities in the layers, and electron energy spectra are analyzed. The effect of adsorbates on the electronic properties of the Cu(001) surface and work function are discussed. Satisfactory agreement with available experimental data has been obtained.     

Optical properties of a new photorecording polymer based on 2,2-difluoro-4-(9-anthracyl)-6-methyl-1,3,2-dioxaborine

The optical properties of a new photorecording polymer based on 2,2-difluoro-4-(9-anthracyl)-6-methyl-1,3,2-dioxaborine have been investigated. This material is found to change its absorption coefficient and refractive index in the visible range under illumination with a wavelength λ = 405.9 nm. This circumstance makes it possible to record static holograms with a spatial frequency up to 2500 lines/mm, a diffraction efficiency above 60%, and a lifetime more than 6 months. A dynamic change in the effective refractive index of this material under 405.9-nm irradiation is found, due to which one can form control optical elements of the light-light type with a modulation frequency up to 50 Hz in it.     

The Pharmacokinetic Profiles of Pre-Operative Prophylactic Cefepime Application in Pregnant and Non-Pregnant Women Undergoing Surgical Interventions Using a Fully Validated Liquid Chromatographic Method

Pregnancy alters pharmacokinetic profile of many drugs, because of altering body volume and metabolism rate. Therefore, dosage rates and concentrations of drugs must be controlled during pregnancy. Here, we identified the pharmacokinetic profile of pre-operatively given cefepime in caesarean section and gynecological operations using a simple, rapid, cost-effective and valid liquid chromatographic method. The chromatographic separation was performed using 40 mM, pH 3.2 phosphate buffer containing 6 % methanol as mobile phase at 0.30 mL min^?1 flow rate. Gradient elution with methanol was applied to get shorter analysis time without any interference from plasma endogens. During analyses, temperature of column, autosampler and detector were set as 30, 10 and 40 °C, respectively. The detection wavelength was 260 nm and ceftizoxime was used as internal standard. At the optimum conditions, the cefepime analysis from plasma samples was completed in 7 min. Cefepime was extracted from plasma samples using perchloric acid with a very high recovery rate (99.3 %). The method was fully validated according to the Food and Drug Administration guidelines for bioanalytical method validation, and found to be selective, linear, repeatable, reproducible and robust. After validation studies, the method was applied to five caesarean-sectioned and four non-pregnant sectioned women treated with pre-operative, prophylactic single intravenous dose of cefepime (1 g Maxipime^®) in order to determine pharmacokinetic profile of cefepime. Peak serum concentrations of cefepime in caesarean-sectioned women at the arterial port after infusion was 70.11 ± 10.74 μg mL^?1. The mean elimination half-life, volume of distribution and calculated area under the concentration–time curve (AUC)_0–∞ were 1.10 ± 0.23 h, 14.22 ± 2.29 L and 101.55 ± 10.99 μg h mL^?1 for caesarean-sectioned women; and 1.14 ± 0.21 h, 14.76 ± 2.92 L and 104.71 ± 36.34 μg h mL^?1 for non-pregnant sectioned women, respectively. The area under curve, elimination half-life, maximum plasma concentration and the mean distribution volume of cefepime were not changed in case of pregnancy.     

Electrochemical Properties of Hollow‐Structured MnS–Carbon Nanocomposite Powders Prepared by a One‐Pot Spray Pyrolysis Process

Spherical, hollow MnS? C composite powders were prepared from a solution of manganese salt, thiourea, and sucrose by one‐pot spray pyrolysis. The MnS? C composite powders were generated by direct sulfidation of MnO with hydrogen sulfide gas generated in situ by decomposition of thiourea during spray pyrolysis. Sucrose, which is used as a carbon source material, plays a key role in the formation of the MnS? C composite powders by improving the reducing atmosphere around the powders. Dot‐mapping images of the composite powders demonstrated uniform distribution of the manganese, sulfur, and carbon components within the MnS? C composite powder. Fine crystals of MnS were uniformly mixed with carbon derived from polymerization and carbonization of sucrose. The carbon content of the MnS? C composite powders was 26 wt %. The discharge capacities of the MnS? C composite powders in the 2nd and 200th cycles were 863 and 967 mA h g^?1, respectively, at a current density of 1000 mA g^?1. The spherical and hollow morphology of the MnS? C composite powders was completely retained, even after 200 cycles. The enhanced cycling and rate performance of the MnS? C composite powders is ascribed to the structural stability of the composite powders.     

Supramolecular structure of electroactive polymer thin films

This paper presents the results of an experimental investigation of the supramolecular structure of polydiphenylenephthalide thin films that exhibit effects of resistive switching. The supramolecular structure of the polymer has been investigated using small-angle neutron scattering in conjunction with atomic force microscopy. It has been found that the internal structure of polymer films consists of structural elements in the form of spheroids. The sizes of the structural elements, which were obtained from the neutron scattering data and analysis of the atomic force microscopy images, correlate well with each other. A model of the formation of polymer layers has been proposed. The observed structural elements in polymer films are formed due to the association of macromolecules in the initial polymer solution.     

Transport and ferromagnetism in InGaAs quantum well structures delta-doped with Mn

Samples containing InGaAs quantum wells with p-type conductivity delta-doped by Mn were synthesized and studied. Magnetic moment measurements on a SQUID magnetometer revealed the presence of ferromagnetism at temperatures T from 4.2 to 400 K. Anomalous Hall effect caused by additional sample magnetization was observed at temperatures of from about 30 to 80 K. The Shubnikov-de Haas effect was recorded at 4.2 K. Negative magnetoresistance changed sign for positive at T ≈ 30 K as the temperature increased.     

Effects of alumina phases on CO2 sorption and regeneration properties of potassium-based alumina sorbents

A range of potassium-based alumina sorbents were fabricated by impregnation of alumina with K₂CO₃ to examine the effects of the structural and textural properties of alumina on the CO₂ sorption and regeneration properties. Alumina materials, which were used as supports, were prepared by calcining alumina at various temperatures (300, 600, 950, and 1,200 °C). The CO₂ sorption and regeneration properties of these sorbents were examined during multiple tests in a fixed-bed reactor in the presence of 1 vol% CO₂ and 9 vol% H₂O. The regeneration capacities of the potassium-based alumina sorbents increased with increasing calcination temperature of alumina. The formation of KHCO₃ increased with increasing calcination temperature during CO₂ sorption, whereas the formation of KAl(CO₃)(OH)₂, which is an inactive material, decreased. These results is due to the fact that the structure of alumina by the calcination temperature is related directly to the formation of the by-product [KAl(CO₃)(OH)₂]. The structure of alumina plays an important role in enhancing the regeneration capacity of the potassium-based alumina sorbent. Based on these results, a new potassium-based sorbent using δ-Al₂O₃ as a support was developed for post-combustion CO₂ capture. This sorbent maintained a high CO₂ capture capacity of 88 mg CO₂/g sorbent after two cycles. In particular, it showed a faster sorption rate than the other potassium-based alumina sorbents examined.     

Fullerides: heterometallic superconductors with composition M<Subscript>2</Subscript>M′C<Subscript>60</Subscript> (M = K,Rb; M′ = Yb,Lu, Sc)

One- or two-step reactions of potassium and rubidium fullerides with composition M_k C₆₀ (M = K, Rb; k = 3—6) and K₆C₆₀ + m K mixtures (m = 1, 3) with anhydrous salts MCl₃ (M = La, Pr, Nd, Sm, Gd, Tb, Yb, Lu, Y, Sc) and YbI₂ in a toluene—THF medium afforded heterometallic fullerides M_3–nM_nC₆₀ (n = 1—3). Among these compounds, substituted fullerides with composition M₂MC₆₀ (M = Yb, Lu, Sc) display superconducting properties with critical temperatures of 14—20 K.Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1623–1628, August, 2004.     

Dendrimer Templated Synthesis of Carbon Nanotube Supported PdAu Catalyst and its Application as Hydrogen Peroxide Sensor

At present, CNT supported catalysts were prepared by two different methods as NaBH₄ reduction and dendrimer templated NaBH₄ reduction method to observe the effect of preparation method on the sensitivity and activity of H₂O₂ reduction. Then, CNT supported Pd_xAu_y bimetallic nanocatalysts having various atomic ratio were synthesized via novel dendrimer templated NaBH₄ reduction method. The resulting materials were characterized employing XRD and TEM. Crystallite size of 10 %Pd_0.7Au_0.3/CNT_dendrimer was obtained from XRD 17.1 nm and mean particle size obtained from TEM is about 15 nm. Moreover, the electrochemical behavior of these catalysts was characterized by cyclic voltammetry (CV) and chronoamperometry (CA) techniques. Pd_xAu_y bimetallic nanocatalysts have excellent electrocatalytic properties and great potential for applications in electrochemical detection. The sensitivity and the limit of detection values for the prepared sensor with monometallic 10 % Pd/CNT_dendrimer catalysts are 219.78 μA mM^?1cm^?2 and 2.6 μM, respectively. However, the sensor constructed with 10 %Pd_0.7Au_0.3/CNT_dendrimer modified electrode has a very high sensitivity of 316.89 μA mM^?1 cm^?2 with a quick response time of 2 s and a wide linear range of 0.001–19.0 mM. In addition, the interference experiment indicated that the 10 % Pd_0.7Au_0.3/CNT_dendrimer nanoparticles have good selectivity toward H₂O₂.