Influence of the characteristics of soil and fly ash on the supercritical carbon dioxide extraction of dioxins.

Several investigations on the extraction of dioxins from soil and fly ash with supercritical fluid have been reported; however, few of them describe the influence of components on the extraction. We extracted dioxins from eight samples with different values of organic carbon content and surface area with supercritical CO(2) at a temperature of 463 K, a pressure of 40 MPa, and using 10% toluene as an entrainer. We researched the influence of the characteristics of soil and fly ash on supercritical CO(2) extraction of dioxins. The results revealed that the extraction efficiencies of PCDD/DFs and PCBs were high for all soil samples, while that of fly ash samples decreased with the increase in organic carbon content and surface area. The extraction efficiencies of dioxins from four standard samples, activated carbon, humic acid, alumina, and florisil, were also examined. The results revealed that the extraction efficiencies were strongly influenced by activated carbon like components present in the samples.     

Micro-phase sorbent extraction for trace analysis via in situ sorbent formation: application to the spectrophotometric determination of nitrite in environmental waters.

A micro-phase sorbent in situ formation from an aqueous solution was proposed for the sensitive spectrophotometric determination of nitrite in environmental waters. Nitrite in a 10 mL sample solution was converted into a cationic azo dye by the reaction with 4-trifluoromethylanilinium ion and N-1-naphthylethylenediammonium ion in an acidic medium. Addition of dodecylbenzenesulfonate ion caused the formation of a suspension of ion associate in the solution. Centrifugation of the solution led to the isolation of a liquid organic phase that extracted the azo dye at the bottom of the centrifuge tube. The volume of the new phase was ca. 5 microL. After the aqueous phase was discarded, the organic phase was dissolved with 1 mL of 2-methoxyethanol to measure the absorbance. Nitrogen as NO2- at concentrations from 1.5 to 30 microg L(-1) was determined with sufficient precision. When 0.2 mL of 2-methoxyethanol was applied to dissolve the organic phase, 0.3-4.8 microg NO2--N L(-1) was determined. The recovery tests for nitrite added to some river water and seawater were satisfactory. This method is very simple and rapid. It takes only 30 min from the dye formation to the measurement of the absorbance.     

Synthesis of self‐photosensitizing polyesters containing donor–acceptor norbornadiene moieties and benzophenone groups and their photochemical reactions

The ring‐opening copolymerization of a glycidyl ester derivative having a benzophenone group and the donor–acceptor norbornadiene (D‐A NBD) dicarboxylic acid, 5‐(4‐methoxyphenyl)‐1,4,6,7,7‐pentamethyl‐2,5‐norbornadiene‐2,3‐dicarboxylic acid, monoglycidyl ester derivatives with D‐A NBD dicarboxylic anhydride using tetraphenylphosphonium bromide as a catalyst proceeded smoothly to give novel self‐photosensitizing NBD polymers in good yields. The molecular weight of these polyesters was about 4,000, and lower than that of analogous NBD polymers having no benzophenone group. All the synthesized NBD polymers isomerized smoothly to the corresponding quadricyclane (QC) polymers upon UV irradiation in tetrahydrofuran (THF) solution and in the film state. The rate of the photoisomerization of the D‐A NBD moieties in these polymers was higher than that of the D‐A NBD moieties in the polymer having no photosensitizing group. Furthermore, the rate of the photoisomerization of the D‐A NBD moieties in these polymers was also higher than that of the NBD polymer with low molecular weight photosensitizer in dilute solution. The photo‐irradiated polymers having QC moieties released thermal energies of 146–180 J/g. The D‐A NBD moieties contained in these NBD polymers possessed fair to good fatigue resistance. The degradation of the NBD moieties in these polymers was 15–30% after 50 repeated cycles of interconversion. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2978–2988, 2007     

Temperature-induced crystallization and compactibility of spray dried composite particles composed of amorphous lactose and various types of water-soluble polymer

The purpose of this study was to investigate the temperature-induced crystallization and the compactibility of the composite particles containing amorphous lactose and various types of polymers. The composite particles were prepared by spray-drying an aqueous solution of lactose and various types of gel forming water-soluble polymers at various formulating ratios. The stabilizing effect of hydroxypropylcellulose (HPC) and polyvinyl pyrrolidone (PVP) on amorphous lactose in the composite particles was smaller than that of sodium alginate in comparing at the same formulating ratios. The difference in the stability of amorphous lactose in the composite particles was attributed to the difference in the glass transition temperature (Tg) of the composite particles caused by the polymers formulated. The tensile strength of compacted spray-dried composite particles containing the polymers was higher than commercial lactose for direct tabletting (DCL21). The tensile strength of the composite particles was increased with an increase in water content in the particles. The difference in compactibility of the composite particles containing the different amount of polymer and water could be explained by the difference in Tg of the particles.     

Formulation design of ointment base suitable for healing of lesions in treatment of bedsores

We intended to develop a desired ointment base suitable for treatment of bedsores including the proliferation of granulation and epidermis. The main bedsore bacteria detected in our hospital were S. aureus in gram-positive coccus and P. aeruginosa in gram-negative bacillus. As the macrogol ointment (MO) was found to have bactericidal effects on these bacteria, MO was adopted as the base for the objective ointment. To improve the properties of the ointment base such as regulating the humidity of the exudation and controlling the release of antibiotics formulated in the ointment, co-formulating effects of various additives to MO were evaluated. The sustained release function of the ointment base was obtained by adding hydrophilic petrolatum (HP) to MO. However, the resultant ointment was found to have a poor humidity regulating property. On the other hand, MO containing 5% of hydroxypropyl cellulose (HPC) showed both the humidity regulating and the controlled drug releasing properties. It was considered that HPC particles dispersed in the ointment could be swelled by absorbing water to form a gel network. The curd tension meter tests for the ointments prepared with the various polymers showed that the MO-HPC base, which showed the highest sustained drug releasing property, was found to have the highest hardness. This result means that HPC formulated into the base forms the most rigid gel structure to resist the erosion of the ointment and to control the drug release.     

Indomethacin sustained-release suppositories containing sugar ester in polyethylene glycol base

Indomethacin (IM) sustained-release suppositories were prepared by the fusion method using sugar ester and polyethylene glycol 4000 (PEG). The suppositories were evaluated by in vitro release testing, X-ray analysis and in vivo absorption testing in rabbits. X-ray analysis showed that IM was amorphous in PEG-base suppositories. In a release test, slow-release was obtained when the sugar ester content of a suppository was 60%. The IM plasma level following the administration of the suppository was well sustained in the absorption test. The main slow-release mechanism is considered to be the release of IM from the matrix composed of sugar ester and PEG, which is represented by the Higuchi equation. A good correlation between the release test and the absorption test was obtained. It is considered that the amorphous state of IM in this type of sustained-release suppository would enhance the release and absorption of IM in the rectum of the rabbit, whose rectal fluid volume is small.     

Catalytic flow-injection determination of copper at nanogram levels by using color formation of N-phenyl-p-phenylenediamine with m-phenylenediamine in the presence of pyridine and ammonia as activators

A spectrophotometric flow-injection method for determining copper(II) has been developed. It is based on the catalytic effect of copper(II) on the oxidative coupling of N-phenyl-p-phenylenediamine with m-phenylenediamine in the presence of hydrogen peroxide. Pyridine and ammonia as activators increased the absorbance for the copper(II)-catalyzed coloration, and the dye formed was stabilized by adding a non-ionic surfactant. The working range of the method was 0.1-2.0 ng ml(-1) of cooper(II) with a relative standard deviation 2.4% at a sampling rate of 30 h(-1). Interference from iron(III) was effectively suppressed by citric acid. Copper in natural water samples can be determined easily.     

Reactivity control of an allylsilane bearing a 2-(phenylazo)phenyl group by photoswitching of the coordination number of silicon

Photoswitching of the coordination number of silicon between four and five in allyldifluoro[2-(phenylazo)phenyl]silane, which was confirmed by X-ray analysis and multinuclear NMR spectroscopy, caused multistep reactions to proceed or stop, yielding tetrafluoro[2-(1-allyl-2-phenylhydrazino)phenyl]silicate without altering other reaction conditions.