Pinacol-Pinacolone Rearrangement of 1, 2-Di-(p-methoxyphenyl)-ethane-1, 2-diol and Bis-(4-methoxyphenyl)-acetaldehyde in Acid Media

1, 2-Di-(p-methoxyphenyl)-ethane-1, 2-diol gave in acid media bis-(4-methoxy-phenyl)-acetaldehyde, 4-4′-dimethoxy-deoxybenzoin, and 1, 2-di-(p-methoxyphenyl)-ethylene oxide; their respective yields being influenced by at least 3 factors: (i) the acid, (ii) its concentration, and (iii) the reaction period. Bis-(4-methoxyphenyl)-acetaldehyde rearranged to the deoxybenzoin in boiling sulfuric (50%) or phosphoric (75%) acids (w/w), and to two isomeric 1, 2-diacetoxy-1, 2-di-(p-methoxyphenyl) ethanes when it was heated with acetic anhydride. The mechanisms of these reactions are discussed.     

Thermal degradation studies of alkyl-imidazolium salts and their application in nanocomposites

Increasing the thermal stability of organically-modified layered silicates is one of the key points in the successful technical application of polymer-layered silicate nanocomposites on the industrial scale. To circumvent the detrimental effect of the lower thermal stability of alkyl ammonium-treated montmorillonite, a series of alkyl-imidazolium molten salts were prepared and characterized by elemental analysis, thermogravimetry (TGA) and thermal desorption mass spectroscopy (TDMS). The effect of counter ion, alkyl chain length and structural isomerism on the thermal stability of the imidazolium salts was investigated. Alkyl-imidazolium-treated montmorillonite clays were prepared by ion exchange of the imidazolium salts with Na-montmorillonite. These organically-modified clays were characterized by X-ray diffraction (XRD), TDMS and thermogravimetry coupled with Fourier transform infrared spectroscopy (TGA-FTIR), and compared to the conventional quaternary alkyl ammonium montmorillonite. Results indicate that the counter ion has an effect on the thermal stability of the imidazolium salts, and that imidazolium salts with PF₆⁻, N(SO₂CF₃)₂⁻ and BF₄⁻ anions are thermally more stable than the halide salts. A relationship was observed between the chain length of the alkyl group and the thermo-oxidative stability; as the chain length increased from propyl, butyl, decyl, hexadecyl, octadecyl to eicosyl, the stability decreased. The results also show that the imidazolium-treated montmorillonite has greater thermal stability compared to the imidazolium halide. Analysis of the decomposition products by FTIR provides an insight about the decomposition products which are water, carbon dioxide and hydrocarbons.     

Development and validation of routine analysis methods for the determination of essential, nonessential, and toxic minor and trace elements in cereal and cereal flour samples by inductively coupled plasma-atomic emission spectrometry

Various digestion procedures were carefully investigated and accurately evaluated with respect to their effect on the analysis of cereals and cereal flours. Multielement methods were selected and well developed for the determination of essential (Cr, Cu, Fe, Mg, Mn, and Zn), nonessential (Ag, Al, Ba, Bi, In, and Ga), and toxic (Cd and Pb) minor and trace elements by inductively coupled plasma-atomic emission spectrometry. Only Ag could be determined, either with aqueous standard or standard addition calibration methods, while the standard addition methods were more accurate for the determination of other elements. The recoveries were mostly within the range of 84.1-113% for the expected values of all analytes with respect to certified reference material NIST SRM 1586a (rice flour). The results proved that, for cereals and cereal flours, the use of H2O2 for wet digestion and HNO3 for dry ashing were not necessary. Linear regression analysis and Student's paired t-test were applied to evaluate the significant differences between different procedures and type of samples.     

Kinetic studies of cobalt alginate gels

Summary Sodium alginate sol can be converted into ionotropic gels by diffusion of di/or trivalent metal ions. The kinetics of this phase transition is studied by two different methods. It is found that the rate of gel membrane formation at the earlier stages is greater than that of the further gel growth. The kinetic studies of gel formation in the presence of a mixture of Cu²⁺ ions with either Co²⁺ or Ni²⁺ ions show that the exhaust of Co²⁺ and Ni^2- ions is remarkable only at the first stage of gel formation. Meanwhile the Cu²⁺ ions continue exchanging all the time with Na²⁺ ions in the alginate sol. The activation energy of gel formation is found to range between 17–23 kJ mol^–, indicating the diffusion control of the process.With 6 figures and 3 tables     

Modification of the resistance of two epoxy resins to accelerated weathering using calcium sulfate as a photostabilizer

Epoxy-timber composites have received increasing attention during the last decades because there are many advantages related to their uses as construction materials in applications such as timber bridges. However, the durability of epoxy-timber composites under outdoor conditions has become a concern for many epoxy resins. This study evaluated the chemical, thermal, and mechanical properties of two cured epoxies, the product of the diglycidyl ether of bisphenol A with 2,4-trimethyl-1,6-hexanediamine (DGEBA-TMDA) and the analogous resin prepared with the hydrogenated diglycidyl ether of bisphenol A (HDGEBA-TMDA), each mixed with 2?wt. % calcium sulfate (CS). We hypothesized that the use of CS, as an inorganic UV absorber, could decrease undesirable effects arising from exposure to UV light, moisture, and extreme temperatures.

An accelerated aging chamber simulated natural weathering for 1, 2, 3, 4, and 6?months. Chemical changes in cured epoxy systems over time in the presence and absence of CS fillers were determined using Fourier transform infrared spectroscopy (FT-IR). Thermal degradation profiles before and after exposure to accelerated weathering were followed by thermogravimetric analysis (TGA). The glass transition temperatures (T_g) before and after accelerated weathering were measured, and the effect of accelerated weathering on the surface morphology of the epoxy systems was investigated by scanning electron microscopy (SEM). In the presence of CS, after 6?months accelerated weathering the tensile strength of DGEBA-TMDA reduced by 23.8?±?2.4%, compared to 46.5?±?5.5% in its absence, while the corresponding values for HDGEBA-TMDA were 21.4?±?2.1% and 28.7?±?1.8%.     

Microdetermination of the fluoride ion using an amplification reaction

Summary A new simple, rapid and accurate amplification micro method for fluoride determination is described. It is based on the reaction between the sparingly soluble calcium iodate and the fluoride ion. After adding isopropyl alcohol to the solution, so that its final concentration is 65%, and filtering, an equivalent amount of the iodate is obtained. The latter is titrated iodometrically resulting in a six-fold amplification of the titre. The method is reproducible over a range from 0.4–8 mg fluoride ion. The mean recovery is 99.69%, after applying a correction factor due to potassium iodate solubility.

---

Zusammenfassung Ein Multiplikationsverfahren zur Mikrobestimmung von Fluorid wurde beschrieben. Es beruht auf der Umsetzung zwischen dem schlecht löslichen Calciumjodat und Fluorid. Nach Zusatz von i-Propylalkohol, bis die Lösung 65% davon enthält, wird filtriert. Die äquivalente Jodatmenge wird jodometrisch titriert. Zwischen 0,4 und 8 mg Fluorid sind die Ergebnisse reproduzierbar. Bei Anwendung eines Korrekturfaktors wegen der Löslichkeit von Kaliumjodat wurden 99,69% Fluorid wieder gefunden.

     

Purification and characterization of recombinant pyrrolidone carboxyl peptidase of Bacillus subtilis.

Bacillus subtilis pyrrolidone carboxyl peptidase (Pcp) overexpressed in Escherichia coli was purified to homogeneity in less than 12 h using ammonium sulphate precipitation and hydrophobic interaction chromatography. The enzyme, which removes amino-terminal L-pyroglutamic acid from peptides, appears to be a tetramer of 25,200 molecular mass subunits. The protein cross-reacted with polyclonal antibodies raised against Pcp from Streptococcus pyogenes. The overexpressed enzyme exhibits an absolute substrate specificity towards N-terminal pyroglutamyl residues with a Michaelis constant of 1.04 mM for L-pyroglutamyl-beta-naphthylamide. The enzyme could be used for the removal of pyroglutamyl residues that block amino termini of proteins and peptides before performing Edman sequential degradation.     

Analysis of the lattice thermal conductivity and phonon-phonon scattering relaxation rate: Application to Mg2Ge and Mg2Si

The lattice thermal conductivities of Mg₂Ge and Mg₂Si have been analysed in the entire temperature range 2–1000 K in the frame of a new expression for the phonon-phonon scattering relaxation rate proposed by Dubey as $$\tau _{3ph}^{ - 1} = (B_{N,I} + B_{U,I} e^{ - \theta /\alpha T} )g(\omega )T^{m_I (T)} + (B_{N,II} + B_{U,II} e^{ - \theta /\alpha T} )g(\omega )T^{m_{II} (T)}$$ based on the Guthrie classification of the phonon-phonon scattering events, and a very good agreement has been obtained between the calculated and experimental values of the lattice thermal conductivity for both samples in the entire temperature range of the study. The separate percentage contributions due to three-phonon normal and umklapp processes towards the three-phonon scattering relaxation rate have also been studied. The role of the four-phonon processes has been included in the present analysis.     

Deprotonation of chloropyridines using lithium magnesates

4-Chloropyridine was deprotonated on treatment with 1/3 equiv of the highly coordinated magnesate Bu₃(TMP)MgLi₂ in THF at −10 °C, as evidenced by trapping with I₂. The use of Bu(TMP)₂MgLi in Et₂O allowed the reaction of 2-chloropyridine, giving the 3-functionalized derivative as the main product. Mixtures of 3- and 4-functionalized derivatives were obtained when 2,6-dichloropyridine was involved in the reaction. Performing the reaction on 3-chloropyridine with lithium magnesates in THF, either the 4,4′-dimer or the 4-iodo derivative was formed after quenching by I₂, the former using 1/3 equiv of Bu₂(TMP)MgLi and the latter using 1 equiv of (TMP)₃MgLi. Similar results were observed with 3,5-dichloropyridine, 2,5-dichloropyridine and 3-chloro-2-fluoropyridine. 1,2-Migration of the lithium arylmagnesate formed by deprotonation was proposed to justify the dimers formation.     

Chloroplast Biogenesis 77: Two Novel Monovinyl and Divinyl Light-Dark Greening Groups of Plants and Their Relationship to the Chlorophyll a Biosynthetic Heterogeneity of Green Plants

Abstract— On the basis of the steady-state accumulation of divinyl (DV) or monovinyl (MV) protochlorophyllide (Pchlide) a in darkness (D) or in the light (L), green plants have been classified into three different greening groups namely dark divinyl-light divinyl (DDV-LDV), dark monovinyl-light divinyl (DMV-LDV) and dark monovinyl-light monovinyl (DMV-LMV) (Ionannides et al., Biochem. Syst. Ecol. 22, 211-220,1994). Interruption of the L phase of the photoperiod by a brief period of darkness (LD condition) revealed a predominance of different chlorophyll (Chl) a biosynthetic routes, depending upon the greening group affiliation of the plant species. For example, in DMV-LDV and DMV-LMV plants, the predominant Chl a biosynthetic routes under the LD condition appear to be the MV Chi a biosynthetic route and/or a mixed DV-MV Chi a biosynthetic route that bifurcates at the level of DV Pchlide a. On the basis of DV and MV Pchlide a accumulation rates after re-darkening, this greening group is designated as a light-dark MV (LDMV) subgroup. In DDV-LDV plants, the predominant LD Chi a biosynthetic routes appear to be the DV Chi a biosynthetic route and/or a mixed DV-MV Chi a biosynthetic route that bifurcates at the level of DV Chlide a. This greening group is designated as a light-dark DV (LDDV) subgroup. It is proposed that upon inhibiting the conversion of Pchlide a to Chi a by interruption of the L phase of the photoperiod by a brief period of D, the rates of DV and MV Pchlide a regeneration may reflect the carryover rates of DV and MV Pchlide a biosynthesis in L instead of reflecting a differential use of DV and MV carboxylic biosynthetic rates in D. It is also shown that in LDMV plants, MV Chlide a and MV Chi a are formed without the participation of [4-vinyl] Chlide a reductase. On the basis of recently published evidence, it is also argued that Pchlide oxidoreductase-A (POR-A) may be active in LDDV plants, while POR-B may predominate in LDMV plant species. The evolutionary significance of the LDDV and LDMV greening subgroups is discussed.