Three-dimensional mesoporous titanosilicates prepared by modified sol-gel method: Ideal gold catalyst supports for enhanced propene epoxidation

Mesoporous titanosilicates with 1-12 mol % Ti content and with three-dimensional wormhole-like mesoporosity are prepared by a modified sol-gel technique. Sorption analysis shows that there is little change in the surface properties with increasing Ti concentration in the samples, implying that Ti atoms either are well-dispersed on the walls of the silica matrix or are present inside the framework with no pore blocking effect. Spectroscopic analysis shows that the Ti atoms are atomically dispersed in the silica matrix even at very high Ti concentration and there is no observable Ti aggregate (anatase) present in the samples. These titanosilicate samples after Au deposition followed by trimethylsilylation (for enhanced hydrophobicity) are highly efficient catalysts for vapor-phase propene epoxidation using O2 and H2. It was possible to achieve commercially desirable performance with about 7% propene conversion, >90% propene oxide selectivity, and about 40% hydrogen efficiency.     

Determination of kinetic parameters for pyrolysis of cellulose and cellulose treated with ammonium phosphate by differential thermal analysis and thermal gravimetric analysis

Activation energy E, pre-exponential factor k₀, and reaction order n for the pyrolysis of α-cellulose and cellulose modified with dihydrogen ammonium phosphate were determined by means of TGA and DTA. The results obtained are E = 53.5 kcal./mole, k₀ = 10^18.8 min.^?1, n = 1 for α-cellulose and E = 32 kcal./mole, k₀ = 10¹² min.^?1, n = 1 for modified cellulose. A new theory of DTA was also developed. This theory, in which it is concluded that the peak value of DTA curve coincides with the maximum rate of reaction, may be used not only for the present work but is generally applicable to DTA studies. Detailed procedures of experiment and theory are described.     

Synthesis and dehydrative condensation of square-planar mono- and dinuclear hydroxopalladium complexes with the hydrotris(3,5-diisopropylpyrazolyl)borato ligand (TpiPr2), TpiPr2(Py)Pd-OH,and (mu-OH)2[PdTpiPr2(H2O)]2

Mono- and dinuclear hydroxopalladium complexes (kappa 2-TpiPr2,X)(py)Pd-OH (1; X = H, Br) and (mu-OH)2[Pd(kappa 2-TpiPr2)(H2O)]2 (2) are prepared by base hydrolysis of the corresponding chloride complexes (kappa 2-TpiPr2,X)(py)Pd-Cl (3) and (mu-Cl)2[Pd(kappa 3-TpiPr2)]2 (4), respectively. Functionalization of the OH part in 1 is effected via dehydrative condensation with protic substrates (H-A) to give a series of substituted products, (kappa 2-TpiPr)(py)Pd-A (5), and treatment of the dinuclear complex 2 with excess acetic acid affords the mononuclear diacetato complex 6, (kappa 2-TpiPr2-H)Pd(OAc)2(HOAc). Complexes 1-4 and 6 have been characterized crystallographically, and it is revealed that complexes 2 and 6 involve cyclic hydrogen-bonding interaction among the nitrogen atom of the pendent noncoordinated pyrazolyl group, the hydrogen atom in the protic part of the ligand (OH, AcOH), and, in the case of 2, an external water molecule.     

Xenophilic complexes bearing a Tp(R) Ligand, [Tp(R)M--M'Ln] [Tp(R) = Tp(iPr2), Tp(#) (Tp(Me2,4-Br)); M=Ni, Co, Fe, Mn; M'Ln = Co(CO)4, Co(CO)3(PPh3), RuCp(CO)2]: the two metal centers are held together not by covalent interaction but by electrostatic attraction

A series of dinuclear complexes, [Tp(R)M--M'L(n)] [Tp(iPr(2) )M--Co(CO)(4) (1; M=Ni, Co, Fe, Mn); Tp(#)M--Co(CO)(4) (1'; M=Ni, Co); Tp(#)Ni--RuCp(CO)(2) (3')] (Tp(iPr(2) )=hydrotris(3,5-diisopropylpyrazolyl)borato; Tp(#) (Tp(Me(2),4-Br))=hydrotris(3,5-dimethyl-4-bromopyrazolyl)borato), has been prepared by treatment of the cationic complexes [Tp(iPr(2) )M(NCMe)(3)]PF(6) or the halo complexes [Tp(#)M--X] with the appropriate metalates. Spectroscopic and crystallographic characterization of 1-3' reveals that the tetrahedral, high-spin Tp(R)M fragment and the coordinatively saturated carbonyl-metal fragment (M'L(n)) are connected only by a metal-metal interaction and, thus, the dinuclear complexes belong to a unique class of xenophilic complexes. The metal-metal interaction in the xenophilic complexes is polarized, as revealed by their nu(CO) vibrations and structural features, which fall between those of reference complexes: covalently bonded species [R--M'L(n)] and ionic species [M'L(n)](-). Unrestricted DFT calculations for the model complexes [Tp(H(2) )Ni--Co(CO)(4)], [Tp(H(2) )Ni--Co(CO)(3)(PH(3))], and [Tp(H(2) )Ni--RuCp(CO)(2)] prove that the two metal centers are held together not by covalent interactions, but by electrostatic attractions. In other words, the obtained xenophilic complexes can be regarded as carbonylmetalates, in which the cationic counterpart interacts with the metal center rather than the oxygen atom of the carbonyl ligand. The xenophilic complexes show divergent reactivity dependent on the properties of donor molecules. Hard (N and O donors) and soft donors (P and C donors) attack the Tp(R)M part and the ML(n) moiety, respectively. The selectivity has been interpreted in terms of the hard-soft theory, and the reactions of the high-spin species 1-3' with singlet donor molecules should involve a spin-crossover process.     

Chemoenzymatic synthesis of (+)-totarol, (+)-podototarin, (+)-sempervirol, and (+)-jolkinolides E and D

The enzymatic resolution products [(1R,4aR,8aR)-1,2,3,4,4a,5,6,7,8,8a-decahydro-5,5,8a-trimethyl-2-oxo-trans-naphthalene-1-methanol-2-ethylene acetal (8aR)-7 (98% ee) and {acetate of (1S,4aS,8aS)-1,2,3,4,4a,5,6,7,8,8a-decahydro-5,5,8a-trimethyl-2-oxo-trans-naphthalene-1-methanol-2-ethylene acetal} (8aS)-9 (>99% ee)] obtained by the lipase-catalyzed enantioselective acetylation of (±)-7 in the presence of vinyl acetate as an acyl donor were converted to the ,β-unsaturated ketones (8aR)-6 and (8aS)-6, respectively. Concise syntheses of (+)-totarol 1, (+)-podototarin 2 and (+)-sempervirol 3 were achieved based on Michael reactions between (8aS)-6 and the appropriate β-keto ester followed by aldol condensation. The first chiral syntheses of (+)-jolkinolides E 4 and D 5 were achieved from (5R,10R,12R)-12-hydroxypodocarpa-8(14)-en-13-one 15 derived from (8aR)-6.     

Organometallic Molecular Wires with Thioacetylene Backbones,trans-{RS-(C≡C)n}2Ru(phosphine)4: High Conductance through Non-Aromatic Bridging Linkers

In this work, the design, synthesis, and single-molecule conductance of ethynyl- and butadiynyl-ruthenium molecular wires with thioether anchor groups [RS=n-C₆H₁₃S, p-tert-Bu−C₆H₄S), trans-{RS−(C≡C)_n}₂Ru(dppe)₂ (n=1 ( 1^R ), 2 ( 2^R ); dppe: 1,2-bis(diphenylphosphino)ethane) and trans-(n-C₆H₁₃S−C≡C)₂Ru{P(OMe)₃}₄ 3^hex ] are reported. Scanning tunneling microscope break-junction study has revealed conductance of the organometallic molecular wires with the thioacetylene backbones higher than that of the related organometallic wires having arylethynylruthenium linkages with the sulfur anchor groups, trans-{p-MeS−C₆H₄-(C≡C)_n}₂Ru(phosphine)₄ 4 ⁿ (n=1, 2) and trans-(Th−C≡C)₂Ru(phosphine)₄ 5 (Th=3-thienyl). It should be noted that the molecular junctions constructed from the butadiynyl wire 2^R , trans-{ Au −RS−(C≡C)₂}₂Ru(dppe)₂ ( Au : gold metal electrode), show conductance comparable to that of the covalently linked polyynyl wire with the similar molecular length, trans-{ Au −(C≡C)₃}₂Ru(dppe)₂ 6³ . The DFT non-equilibrium Green's function (NEGF) study supports the highly conducting nature of the thioacetylene molecular wires through HOMO orbitals.     

Dimesitylborylethynylated Arenes: Unique Electronic and Photophysical Properties Caused by Ethynediyl (C≡C) Spacers

Herein, we report the synthesis and electrochemical and photophysical properties of aromatic hydrocarbons having one or two dimesitylborylethynyl peripherals. The mono- ( 1 ) and diboryl compounds ( 2 ), readily prepared by nucleophilic substitution reaction, are fairly stable to air and moisture in the solid state. The inserted ethynediyl (C≡C) spacer cancels the steric hindrance between the bulky dimesitylboryl groups and aromatic rings, leading to effective π conjugation over the B−C≡C−Ar linkages, as revealed by cyclic voltammetry. Despite the small structural differences, the photophysical properties of the benzene, naphthalene, and anthracene derivatives are different. Virtually no emission was observed from the benzene derivatives, whereas the anthracene derivatives emitted with high quantum yields both in solution and in the solid state. Notably, the naphthalene derivatives showed aggregation-induced emission behavior. Unlike the common sterically congested triarylborane derivatives reported so far, the anthracene derivatives showed π–π*-type absorption and emission bands, which derive from efficient intramolecular orbital interactions between the boron centers and anthracene moieties, as supported by DFT calculations. As a result, the dimesitylborylethynyl substituents effectively lower the LUMO levels of the aromatic hydrocarbon parts, whereas the HOMO levels are almost unaffected, thereby leading to materials with controllable HOMO–LUMO gaps.     

Solubility Switching of Metallophthalocyanines and Their Larger Derivatives upon Encapsulation

Metallophthalocyanines (MPcs) are very useful pigments but scarcely soluble without appropriate functional groups in common solvents. Herein, we report that bent polyaromatic amphiphiles act as excellent solubilizing reagents for nonfunctionalized MPcs and larger MPc derivatives (e.g., CuPc, perhalogenated CuPcs, Cu‐naphthalocyanine, CuPc polymers, and double‐decker MPcs) in neutral water upon encapsulation. The resultant MPc nanocomposites display high stability towards heat and pH change. More importantly, the encapsulated MPcs can be released by simple protocols under mild conditions both into a bulk solvent and onto glass or polymer plates.     

Polycationic‐Shelled Capsular and Tubular Nanostructures and Their Anionic–Guest Binding Properties

For the development of novel nanospace with unique electrostatic character, we prepared new capsular and tubular nanostructures by the quantitative assembly of metal ions and bent bisacridinium ligands. The capsule and tube have closed spherical and open cylindrical cavities, respectively, with diameters of around 1 nm surrounded by cationic polyaromatic panels. Thanks to the facile synthetic protocol (three steps), another polycationic capsule with an elliptical nanocavity was also prepared by using an elongated ligand. In spite of the absence of pendant hydrophilic groups, the spherical polyaromatic capsule shows sufficient water solubility due to the polycationic shell. Moreover, the highly cationic cavity (12+) can selectively encapsulate anionic organic compounds in water.