Identification of Al(III) species in a solution containing equimolar concentrations of Al(III) and citric acid using varying-temperature 27Al NMR spectrometry.

27Al NMR spectra of an equimolar (10 mM) Al(III)-citrate system were obtained at different temperatures. The linewidths of the signals decreased in the spectra recorded at elevated temperatures, which enabled us to unequivocally identify the resonance lines. From the spectrum recorded at 65 approximately C, a mononuclear Al(III)-citrate complex was identified at a solution pH of 3.0 in addition to trinuclear Al(III)-citrate complex, which dominated at pH 4.0.     

Covering vertices of a graph by k disjoint cycles

Let d, k and n be three integers with k3, d4k−1 and n3k. We show that if d(x)+d(y)d for each pair of nonadjacent vertices x and y of a graph G of order n, then G contains k vertex-disjoint cycles converting at least min{d,n} vertices of G.     

Investigation of the drying conditions for amidosulfuric acid.

The drying conditions for primary standards of volumetric analysis have a significant effect on the titration results due to changes in the purity, stability and homogeneity. Amidosulfuric acid, a strong acid used as a reference material for volumetric analysis in Japan, was dried in a vacuum desiccator or heated at different temperatures, and then measured by Karl-Fischer titration, thermogravimetry/mass spectroscopy (TG-MS), ion chromatography and coulometric titration. The optimum drying conditions were at 50 degrees C for 24 h with crushing.     

Effect of freezing rate on physical stability of lyophilized cationic liposomes

Factors affecting the storage stability of lyophilized cationic liposomes were investigated using liposomes prepared with various excipients and by different freezing rates, either quick freezing (freezing by immersion into liquid nitrogen) or slow freezing (cooling to -50 degrees C at a rate of -10 degrees C/h). Increases in the particle size of cationic liposomes observed during freeze-drying were inhibited by the addition of sucrose, trehalose and sucrose-dextran mixtures (1 : 1 and 2 : 1 by weight). The storage instability of the formulations, as indicated by changes in particle size, was affected by their glass transition temperature (T(g)). Addition of high-T(g) excipients resulted in smaller increases in the particle size, indicating improvement of storage stability. The storage stability of cationic liposome formulations was also affected by freezing rate. Formulations prepared by slow freezing exhibited better stability. Longer shear relaxation times were observed for formulations prepared by slow freezing compared with those prepared by quick freezing. This indicates that formulations prepared by slow freezing have a lower matrix mobility, which may result in better storage stability. T(g) or (1)H-NMR relaxation measurements could not detect differences in matrix mobility between formulations prepared by different freezing rates. Shear relaxation measurements seem to be a useful method for evaluating the storage stability of cationic liposome formulations.     

Sol–gel preparation and properties of hydroxypropylcellulose–titania hybrid thin films

Hydroxypropylcellulose (HPC)–titania hybrid thin films were prepared by sol–gel method where titanium tetraisopropoxide Ti(OC₃H₇ ⁱ )₄ was hydrolyzed under acidic conditions in the presence of HPC, followed by dip-coating and drying at 120 °C for 24 h. The viscosity average molecular weight of HPC was 55,000–70,000 or 110,000–150,000, and the TiO₂/(HPC + TiO₂) mass ratio ranged from 0 to 1, which was calculated on the assumption that all Ti(OC₃H₇ ⁱ )₄ is converted into TiO₂. The films were 0.35–1.0 μm thick, transparent in visible region and opaque in ultraviolet (UV) region, where the optical absorption coefficient in UV region increased with increasing titania content. The refractive index increased with increasing titania content, ranging from 1.6 to 1.8 for the hybrid thin films. The pencil hardness increased from 6B to 5H, the durability in hot water significantly increased and the contact angle of water on films increased from 35° to 89° with increasing titania content. Crack-free films could be deposited on organic polymer substrates irrespective of titania or HPC contents, where cracking did not occur at higher HPC contents even when the substrate was bent.     

Hydrogenation of olefins in supercritical CO(2) catalyzed by palladium nanoparticles in a water-in-CO(2) microemulsion

Nanometer-sized metallic palladium particles can be synthesized by hydrogen reduction of Pd2+ ions dissolved in the water core of a water-in-CO2 microemulsion. The Pd nanoparticles, stabilized by the micromeulsion and uniformly dispersed in the supercritical fluid phase, are effective catalysts for hydrogenation of olefins. Examples of rapid and efficient hydrogenation of water-soluble and CO2-soluble olefins catalyzed by the Pd nanoparticles in supercritical CO2 are given.     

Structure reinvestigation of gelsemoxonine,a constituent of Gelsemium elegans,reveals a novel,azetidine-containing indole alkaloid

[structure: see text] The structure of gelsemoxonine, isolated from Gelsemium elegans Benth., was revised to be a novel oxindole alkaloid having an azetidine unit. A new alkaloid, 14,15-dihydroxygelsenicine, which was presumed to be a biosynthetic precursor of gelsemoxonine, was also isolated.     

Application of 1,2,3,5,6,7-hexahydropyrrolizinium perchlorate in the synthesis of 7a-substituted hexahydro-1h-pyrrolizines

The method for preparing 7a-substituted hexahydro-1H-pyrrolizines 2 from 1,2,3,5,6,7-hexahydropyrrol-izinium Perchlorate (3) was investigated, by which introduction of a wide variety of functionalities on C(7a) could be achieved easily.     

Comparison of the glass transition temperature and fragility parameter of isomalto-olygomer predicted by molecular dynamics simulations with those measured by differential scanning calorimetry

The purpose of this study is to examine whether molecular dynamics (MD) simulations using a commercially available software for personal computers can estimate the glass transition temperature (Tg) of amorphous systems containing pharmaceutically-relevant excipients. MD simulations were carried out with an amorphous matrix model constructed from isomaltoheptaose, and the Tg estimated from the calculated density versus temperature profile was compared with the Tg measured by differential scanning calorimetry (DSC) for freeze-dried isomalto-oligomer having an average molecular weight close to that of isomaltoheptaose. The Tg values determined by DSC were lower by 10 to 20 K than those extrapolated from the Tg values estimated by MD simulation. Fragility parameter was estimated to be 56 and 51 from MD simulation and from DSC measurement, respectively. Thus, the results suggest that MD simulation can provide approximate estimates for the Tg and fragility parameter of amorphous formulations. However, a reduction of the cooling rate, achievable by sufficiently elongating the simulation duration, is necessary for more accurate estimation.     

Control of photoinduced energy- and electron-transfer steps in zinc porphyrin-oligothiophene-fullerene linked triads with solvent polarity

The dramatic changes of the lifetimes of the charge-separated (CS) states were confirmed in zinc porphyrin (ZnP)-oligothiophene (nT)-fullerene (C(60)) linked triads (ZnP-nT-C(60)) with the solvent polarity. After the selective excitation of the ZnP moiety of ZnP-nT-C(60), an energy transfer took place from the (1)ZnP moiety to the C(60) moiety, generating ZnP-nT-(1)C(60). In polar solvents, the CS process also took place directly via the (1)ZnP moiety, generating ZnP(*+)-nT-C(60)(*-), as well as the energy transfer to the C(60) moiety. After this energy transfer, an indirect CS process took place from the (1)C(60) moiety. In the less polar solvent anisole, the radical cation (hole) of ZnP(*+)-nT-C(60)(*-) shifted to the nT moiety; thus, the nT moiety behaves as a cation trapper, and the rates of the hole shift were evaluated to be in the order of 10(8) s(-1); then, the final CS states ZnP-nT(*+)-C(60)(*-) were lasting for 6-7 mus. In the medium polar solvent o-dichlorobenzene (o-DCB), ZnP-nT(*+)-C(60)(*-) and ZnP(*+)-nT-C(60)(*-) were present as an equilibrium, because both states have almost the same thermodynamic stability. This equilibrium resulted in quite long lifetimes of the CS states (450-910 mus) in o-DCB. In the more polar benzonitrile, the generation of ZnP-nT(*+)-C(60)(*-) was confirmed with apparent short lifetimes (0.6-0.8 mus), which can be explained by the fast hole shift to more stable ZnP(*+)-nT-C(60)(*-) followed by the faster charge recombination. It was revealed that the relation between the energy levels of two CS states, which strongly depend on the solvent polarity, causes dramatic changes of the lifetimes of the CS states in ZnP-nT-C(60); that is, the most appropriate solvents for the long-lived CS state are intermediately polar solvents such as o-DCB. Compared with our previous data for H(2)P-nT-C(60), in which H(2)P is free-base porphyrin, the lifetimes of the CS states of ZnP-nT-C(60) are approximately 30 times longer than those in o-DCB.