Stability testing in an integrated scheme

ISO Guide 35 deals with RM stability issues and scrutinizes the evaluation of stability testing results under the assumption that either there is no trend at all (a rather rare situation), or any observed deterministic change is insignificant and thus can be neglected. However, market demands for reliable reference materials are obviously not limited to stable or at least seemingly stable materials. In many analytical applications, analytes and measurands under consideration are known, or at least suspected, to be unstable on time scales that may vary widely from measurand to measurand. The Federal Institute for Materials Research and Testing (BAM) has developed (and successfully uses) an integrated approach in its certification practice. The approach is based on an initial stability study and subsequent post-certification monitoring. Data evaluation is model-based and takes advantage of all information collected in the stability testing scheme(s). It thus allows one to deal with any kind of instability observed, to assess limiting time intervals at any stress condition in the range tested, to estimate a final expiry date for materials with detected instabilities or the maximum admissible re-testing interval for seemingly stable materials, and to assess maximum admissible stress loads during delivery of the material to the customer. The article describes (and exemplifies) typical study layout, the model selection, and the integrated data assessment.     

Binding position of azathioprine with bovine serum albumin determined by measuring nuclear magnetic resonance relaxation time.

The interaction between azathioprine (AZ) and bovine serum albumin (BSA) is mainly due to hydrophobic binding according to the dependence of the binding constant on the ionic strength obtained by equilibrium dialysis. The binding constant and partition coefficient of AZ were smaller than those of warfarin, phenylbutazone and ibuprofen. Little variation in the proton chemical shift of AZ was observed whether there was an absence or presence of BSA (7.25 x 10(-5) M). The spin-lattice relaxation time (T1) of AZ decreased in the presence of BSA to 6-22%. The spin-spin relaxation rate (1/T2) of AZ increased 16-24 times for the methyl group and the imidazole ring and 8-13 times for the purine ring in the presence of BSA. The ratio of the spin-spin relaxation rate of the free AZ to the bound AZ ((1/T2)b/(1/T2)f) of the methyl group and the imidazole ring was 2-3 times larger than that of the purine ring. The binding of AZ to BSA was concluded to be mainly at the methyl group on the imidazole ring of AZ.     

2‐connected 7‐coverings of 3‐connected graphs on surfaces

An m‐covering of a graph G is a spanning subgraph of G with maximum degree at most m. In this paper, we shall show that every 3‐connected graph on a surface with Euler genus k ≥ 2 with sufficiently large representativity has a 2‐connected 7‐covering with at most 6k ? 12 vertices of degree 7. We also construct, for every surface F² with Euler genus k ≥ 2, a 3‐connected graph G on F² with arbitrarily large representativity each of whose 2‐connected 7‐coverings contains at least 6k ? 12 vertices of degree 7. © 2003 Wiley Periodicals, Inc. J Graph Theory 43: 26–36, 2003     

The number of contractible edges in 3-connected graphs

An edge of a 3-connected graph is calledcontractible if its contraction results in a 3-connected graph. Ando, Enomoto and Saito proved that every 3-connected graph of order at least five has |G|/2 or more contractible edges. As another lower bound, we prove that every 3-connected graph, except for six graphs, has at least (2|E(G)| + 12)/7 contractible edges. We also determine the extremal graphs. Almost all of these extremal graphsG have more than |G|/2 contractible edges.     

Chemical analysis of acidic silicon etch solutions: I. Titrimetric determination of HNO3, HF, and H2SiF6

The chemical etching of silicon using HF-HNO₃ mixtures is a widely used process in the processing of silicon wafers for microelectronic or photovoltaic applications. The control of the etch bath composition is the necessary condition for an effective bath utilization, for the replenishment of the consumed acids, and to maintain a certain etch rate. The present paper describes two methods for the total analysis of the individual etch bath constituents HF, HNO₃, and H₂SiF₆. Both methods start with an aqueous acid-base titration determining the total acid concentration and the concentration of H₂SiF₆. The first method is an acid-base titration using a 0.1 mol L⁻¹ methanolic solution of cyclohexylamine (CHA) as non-aqueous titrant to determine the content of nitric acid. Then, the amount of hydrofluoric acid is calculated from the difference between the total acid and nitric acid content. The second method is based on the determination of the total fluoride concentration using a fluoride ion-selective electrode (F-ISE). The content of hydrofluoric acid is obtained from the difference between the total fluoride content and the amount of fluoride bound as H₂SiF₆. The amount of nitric acid results finally calculated as difference to the total acid content.     

Difference in electrophoretic mobility and plasmic digestion profile between four recombinant fibrinogens, gamma 308K, gamma 308I, gamma 308A, and wild type (gamma 308N)

We have produced recombinant gamma-chain variant fibrinogens, gamma308K, gamma308I, and gamma308A simultaneously with wild-type fibrinogen, gamma-308N, by genetic protein engineering using Chinese hamster ovary cells. Although all three variant fibrinogens are a result of a single amino acid substitution, the aberrant gamma-chains of gamma308K and gamma308I fibrinogens migrated faster than gamma308N. Furthermore, plasmic digestion profiles were examined in the presence of 5 mM ethylene glycol-bis(beta-aminoethyl ether)-N,N,N',N'-tetraacetic acid (EGTA) or 1 mM CaCl2. In the presence of EGTA, the three variant fibrinogens were digested into D1 and D2 fragments slightly faster than wild type. In addition, the D2 fragment derived from gamma308K was further digested into D3 by plasmin much faster than that from gamma308N. These data suggest that cleavage of gamma356Lys-gamma357Ala bond by plasmin in gamma308K, gamma308I, and gamma308A is slightly accelerated and the gamma302Lys-gamma303Phe bond is cleaved by plasmin rapidly in only the gamma308K variant. Furthermore, the substitution of Lys for gamma308Asn results in the generation of a new plasmin cleavage site between gamma308Lys and gamma309Gly in the presence of EGTA. In conclusion, a substitution at residue gamma308Asn may cause a conformational change in the gammachain of fragment D affecting polymerization and plasmin cleavage.     

Solution- and bound-state conformational study of N,N',N"-triacetyl chitotriose and other analogous potential inhibitors of hevamine: application of trNOESY and STD NMR spectroscopy

The solution-state conformations of N,N',N"-triacetyl chitotriose (1) and other potential chitinase inhibitors 2-4 were studied using a combination of NMR spectroscopy (NOESY) and molecular mechanics calculations. Determination solely of the global energy minimum conformation was found to be insufficient for an agreement with the NMR results. An appropriate consistency between the NMR experimental data and theoretical calculations was only reached by assessing the structures as population-weighted average conformers based on Boltzmann distributions derived from the calculated relative energies. Analogies, but also particular differences, between the synthetic compounds 2-4 and the naturally-occurring N,N',N"-triacetyl chitotriose were found. Furthermore, the conformation of compounds 1 and 2 when bound to hevamine was also studied using transferred NOESY experiments and the binding process was found to impart a level of conformational restriction on the ligands. The preferred conformation as determined for 1 in the bound state to hevamine belonged to one of the conformational families found for the compound when free in solution, although full characterisation of the bound-state conformations was impeded due to severe signal overlap. Saturation transfer difference NMR experiments were also employed to analyse the binding epitopes of the bound compounds. We thus determined that it is mainly the acetyl amido groups of the trisaccharide and the heterocyclic moiety which are in close contact with hevamine.     

Automated multiple-layer spotting for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry of synthetic polymers utilizing ink-jet printing technology

Recently, a new multiple-layer matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) sample spotting technique for poly(ethylene glycol), offering improved analysis possibilities, was described. In this contribution the application of ink-jet printing to automated, multiple-layer MALDI-TOFMS sample preparation of synthetic polymers is presented, allowing accurate deposition of matrix, additive and analyte solutions. The new sample preparation technique was evaluated for poly(ethylene glycol) as well as poly(methyl methacrylate) standards, and optimized settings for both synthetic polymers have been obtained.