3D‐morphology reconstruction of nanoscale phase‐separation in polymer memory blends

In many organic electronic devices functionality is achieved by blending two or more materials, typically polymers or molecules, with distinctly different optical or electrical properties in a single film. The local scale morphology of such blends is vital for the device performance. Here, a simple approach to study the full 3D morphology of phase‐separated blends, taking advantage of the possibility to selectively dissolve the different components is introduced. This method is applied in combination with AFM to investigate a blend of a semiconducting and ferroelectric polymer typically used as active layer in organic ferroelectric resistive switches. It is found that the blend consists of a ferroelectric matrix with three types of embedded semiconductor domains and a thin wetting layer at the bottom electrode. Statistical analysis of the obtained images excludes the presence of a fourth type of domains. The criteria for the applicability of the presented technique are discussed. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1231–1237     

Stability testing in an integrated scheme

ISO Guide 35 deals with RM stability issues and scrutinizes the evaluation of stability testing results under the assumption that either there is no trend at all (a rather rare situation), or any observed deterministic change is insignificant and thus can be neglected. However, market demands for reliable reference materials are obviously not limited to stable or at least seemingly stable materials. In many analytical applications, analytes and measurands under consideration are known, or at least suspected, to be unstable on time scales that may vary widely from measurand to measurand. The Federal Institute for Materials Research and Testing (BAM) has developed (and successfully uses) an integrated approach in its certification practice. The approach is based on an initial stability study and subsequent post-certification monitoring. Data evaluation is model-based and takes advantage of all information collected in the stability testing scheme(s). It thus allows one to deal with any kind of instability observed, to assess limiting time intervals at any stress condition in the range tested, to estimate a final expiry date for materials with detected instabilities or the maximum admissible re-testing interval for seemingly stable materials, and to assess maximum admissible stress loads during delivery of the material to the customer. The article describes (and exemplifies) typical study layout, the model selection, and the integrated data assessment.     

Chemical analysis of acidic silicon etch solutions: I. Titrimetric determination of HNO3, HF, and H2SiF6

The chemical etching of silicon using HF-HNO₃ mixtures is a widely used process in the processing of silicon wafers for microelectronic or photovoltaic applications. The control of the etch bath composition is the necessary condition for an effective bath utilization, for the replenishment of the consumed acids, and to maintain a certain etch rate. The present paper describes two methods for the total analysis of the individual etch bath constituents HF, HNO₃, and H₂SiF₆. Both methods start with an aqueous acid-base titration determining the total acid concentration and the concentration of H₂SiF₆. The first method is an acid-base titration using a 0.1 mol L⁻¹ methanolic solution of cyclohexylamine (CHA) as non-aqueous titrant to determine the content of nitric acid. Then, the amount of hydrofluoric acid is calculated from the difference between the total acid and nitric acid content. The second method is based on the determination of the total fluoride concentration using a fluoride ion-selective electrode (F-ISE). The content of hydrofluoric acid is obtained from the difference between the total fluoride content and the amount of fluoride bound as H₂SiF₆. The amount of nitric acid results finally calculated as difference to the total acid content.     

Solution- and bound-state conformational study of N,N',N"-triacetyl chitotriose and other analogous potential inhibitors of hevamine: application of trNOESY and STD NMR spectroscopy

The solution-state conformations of N,N',N"-triacetyl chitotriose (1) and other potential chitinase inhibitors 2-4 were studied using a combination of NMR spectroscopy (NOESY) and molecular mechanics calculations. Determination solely of the global energy minimum conformation was found to be insufficient for an agreement with the NMR results. An appropriate consistency between the NMR experimental data and theoretical calculations was only reached by assessing the structures as population-weighted average conformers based on Boltzmann distributions derived from the calculated relative energies. Analogies, but also particular differences, between the synthetic compounds 2-4 and the naturally-occurring N,N',N"-triacetyl chitotriose were found. Furthermore, the conformation of compounds 1 and 2 when bound to hevamine was also studied using transferred NOESY experiments and the binding process was found to impart a level of conformational restriction on the ligands. The preferred conformation as determined for 1 in the bound state to hevamine belonged to one of the conformational families found for the compound when free in solution, although full characterisation of the bound-state conformations was impeded due to severe signal overlap. Saturation transfer difference NMR experiments were also employed to analyse the binding epitopes of the bound compounds. We thus determined that it is mainly the acetyl amido groups of the trisaccharide and the heterocyclic moiety which are in close contact with hevamine.     

Automated multiple-layer spotting for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry of synthetic polymers utilizing ink-jet printing technology

Recently, a new multiple-layer matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) sample spotting technique for poly(ethylene glycol), offering improved analysis possibilities, was described. In this contribution the application of ink-jet printing to automated, multiple-layer MALDI-TOFMS sample preparation of synthetic polymers is presented, allowing accurate deposition of matrix, additive and analyte solutions. The new sample preparation technique was evaluated for poly(ethylene glycol) as well as poly(methyl methacrylate) standards, and optimized settings for both synthetic polymers have been obtained.     

Competitive formation of helical cycloocta- and cyclododecapyrroles

In connection with a study aimed at the evaluation of electronic effects in spiro-dicorrole (1a) and its binuclear Ni(II) complex (1b) we became interested in gem-dimethyl-substituted cyclotetrapyrrole (2a) and the corresponding Ni(II) complex (2b). Attempts to prepare 2a as the 12,13,16,17-tetraethyl-2,3,7, 8-tetramethyl derivative (5) by an acid-catalyzed (1 + 1) condensation of dimethyldipyrrylmethane 3 and diformylbipyrrole 4 resulted in the formation of the (2 + 2) and (3 + 3) condensation products, i.e., the cyclooctapyrrole 6 and the cyclododecapyrrole 7, respectively, rather than in that of the desired gem-dimethyl cyclotetrapyrrole. The cyclododecapyrrole 7, isolated as the major product, is among the largest cyclopolypyrroles known to date. These two new macrocycles have been structurally characterized by variable temperature 1D and 2D NMR experiments, as well as by single-crystal X-ray diffraction analysis. In solution both the cyclooctapyrrole 6 and cyclododecapyrrole 7 exhibit dynamic behavior. At 337 K 6 adopts a D(2)-symmetric conformation, whereas at 196 K two equivalent C(2) conformers that interconvert through the D(2)-symmetric intermediate are observed. The energy barrier for the interconversion process between these two degenerate conformers is found to be 10.6 kcal mol(-)(1). The solution dynamics of 7 could be described in an analogous manner, with the time-averaged conformation at 378 K displaying D(3)(h)() symmetry. X-ray analyses showed that for both macrocycles, 6 and 7, the solid state structures were nearly identical to the low-temperature solution conformers.     

Biosensors for environmental pollutants and food contaminants

This review article provides an overview of the most recent literature on biosensors for environmental pollutants and food contaminants. Due to the large number of publications, only papers published between 2000 and January 2003 were considered. Also, while not all of the published literature could be reviewed here, over 200 references are cited to provide a good overview of research undertaken in the last two years. Older publications are covered by a number of earlier review articles. This article provides an introduction into the field including specific consideration of the application areas, describes the typical biosensor assay format used, and is subsequently structured according to the biorecognition elements used (i.e., nucleic acids, enzymes, whole cells, tissue and whole organisms, antibodies and receptors, and biomimetic materials). In addition, a section on microbiosensing systems is provided. Since only very few microbiosensors with applications in environmental and food systems have been published, enabling technology is also covered in this article.Abbreviations BOD biological oxygen demand - cfu colony forming units - DNP dinitrophenol - GFP green fluorescent protein - NASBA nucleic acid sequence-based amplification - PCR polymerase chain reaction - ppt parts per trillion - QCM quartz crystal microbalance - SPR surface plasmon resonance     

Behaviour of Pluronic P84 block copolymer micelles above the gelification temperature as probed by positron annihilation lifetime spectroscopy

The new method based on positron annihilation lifetime spectroscopy (PALS) to determine both the mean core radius, R(core), and aggregation number, N(ag), of micelles is applied to the study of aqueous solutions of the triblock Pluronic P84 copolymer as a function of temperature (T), beyond the gelification point (334 K). Two long-lived components appear in the PALS spectra, ascribed to triplet positronium in the water bulk (o-Ps(aq)) and in the organic core of the micelles (o-Ps(org)). Of the various fitting parameters, only the lifetime of the latter species, tau4, and the micellar parameters, R(core) and N(ag), disclose the occurrence of gelification by first increasing up to 334 K, then decreasing. By contrast to what is known in case of phase transition, none of the parameters shows any abrupt change at 334 K, whereas the macroscopic viscosity of the solutions suffers a drastic increase. This is attributed to the fact that positronium is sensitive to the microviscosity of the solutions. At the transition point, the properties of the polyoxipropylene aggregates forming the organic core of the P84 micelles are not greatly affected. Furthermore, the fact that the experimental N(ag) values coincide with those calculated for spheres, from the R(core) values, indicates that the shape of the P84 cores does not change significantly after gelification. The onset of gelification results from a decrease in the hydrogen bonding interactions in the solution with an ensuing relative increase in the interactions between the polyoxipropylene (PPO) groups, initially forming the corona of the P84 micelles, in an intermicellar mode. This increased solicitation of the PPO groups outside their initial location would result in depletion in the number of surfactant molecules forming the micelles, viz. a decrease in both R(core) and N(ag) above 334 K. From the data, additional information can be gained regarding the local viscosity and surface tension in the micellar cores.