Design,synthesis, and characterization of main‐chain,aromatic polyesters based on 3,4‐ethylenedioxythiophene

A series of new thermoplastic polyesters based on 3,4‐ethylenedioxythiophene (EDOT) with flexible aliphatic spacers have been synthesized and characterized for the first time. The thermal properties of these polyesters based on EDOT are comparable to those of conventional polyesters based on the 1,4‐phenyl unit, indicating that EDOT is a viable replacement for the phenyl units. The glass‐transition and melting‐transition temperatures decrease monotonically with an increase in the spacer length. Theoretical calculations have revealed that the core angle for EDOT is comparable to that of unsubstituted thiophene and hence should be compatible with the formation of the mesophase. This has been confirmed experimentally by the synthesis of a main‐chain, thermotropic, liquid‐crystalline polyester based on EDOT that exhibits fluid birefringence. In fact, this is the first report in which a main‐chain, liquid‐crystalline polymer based on 3,4‐disubstituted thiophene has been successfully designed and synthesized. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3479–3486, 2006     

Flow injection analysis for calcium in serum,water and waste waters by spectrophotometry and by ion-selective electrode

The Flow Injection technique is shown to provide fast, reliable and sensitive methods for the determination of calcium in various aqueous as well as serum samples; spectrophotometric or potentiometric detection can be used. At sampling rates of 100–110 samples per hour, with 30-μl sample injections, high reproducibility of measurement and low reagent consumption are achieved in both methods. In the spectrophotometric method, the analytical readout is available within 12 s after sample injection at a total reagent consumption of 0.75 ml per analysis. The potentiometric measurement of the calcium activity in serum is placed on a reliable basis by alternating measurements of serum samples and aqueous standards without incurring any non-reproducible changes in potential between aqueous and serum solutions. This permits the simultaneous determination of pH and pCa, the analytical readout being available within XXX s of sample injection. The good agreement between the results obtained with the Flow Injection method and those attained by atomic absorption and EDTA titrations as well as pCa stat-measurements show that the new methods are potentially suitable for routine analysis.     

A family of vanadate esters of monoionized and diionized aromatic 1,2-diols: synthesis,structure, and redox activity

The concerned diols (general abbreviation, H(2)L) are catechol (H(2)L(1)) and its 3,5-Bu(t)(2) derivative (H(2)L(2)). Esters of the type VO(xsal)(HL), 2, are obtained by reacting H(2)L with VO(xsal)(H(2)O) or VO(xsal)(OMe)(HOMe), where xsal(2-) is the diionized salicylaldimine of glycine (x = g), L-alanine (x = a), or L-valine (x = v). The reaction of VO(acac)(2) with H(2)L and the salicylaldimine (Hpsal) of 2-picolylamine has furnished VO(psal)(L), 3. In the structures of VO(gsal)(HL(1)), 2a, and VO(vsal)(HL(2)), 2f, the HL(-) ligand is O,O-chelated, the phenolic oxygen lying trans to the oxo oxygen atom. The xsal(2-) coligand has a folded structure and the conformation of 2f is exclusively endo. In both 2a and 2f the phenolic oxygen atom is strongly hydrogen bonded (O...O, 2.60 A) to a carboxylic oxygen atom of a neighboring molecule. In VO(psal)(L(2)).H(2)O, 3b, the diionized diol is O,O-chelated to the metal and the water molecule is hydrogen bonded to a phenoxidic oxygen atom (O.O, 2.84 A). The C-O and C-C distances in the V(diol) fragment reveal that 2 is a pure catecholate and 3 is a catecholate-semiquinonate hybrid. In solution each ester gives rise to a single (51)V NMR signal (no diastereoisomers), which generally shifts downfield with a decrease in the ester LMCT band energy. The V(V)/V(IV) and catecholate-semiquinonate reduction potentials lie near -0.75 and 0.35, and 1.10 and 0.70 V vs SCE for 2 and 3, respectively. Molecular oxygen reacts smoothly with 2 quantitatively furnishing the corresponding o-quinone, and in the presence of H(2)L the reaction becomes catalytic. In contrast, type 3 esters are inert to oxygen. The initial binding of O(2) to 2 is proposed to occur via hydrogen bonding with chelated HL(-).     

Synthesis of azahelicenes through Mallory reaction of imine precursors: corannulene substrates provide an exception to the rule in oxidative photocyclizations of diarylethenes

Typically, the synthesis of phenanthrene-based polycyclic aromatic hydrocarbons relies on the Mallory reaction. In this approach, stilbene (PhCH CHPh)-based precursors undergo an oxidative photocyclization reaction to join the two adjacent aromatic rings into an extended aromatic structure. However, if one C C carbon atom is replaced by a nitrogen atom (C N), the synthesis becomes practically infeasible. Here, we show the very first examples of a successful Mallory reaction on stilbene-like imine precursors involving the molecularly curved corannulene nucleus. The isolated yields exceed 90% and the resulting single and double aza[4]helicenes exhibit adjustable high affinity for electrons.

First azahelicene synthesis from corannulene-based imine precursors is presented.     

Cation exchange column chromatography in aqueous ammonium acetate: Separation of U(VI), Al(III), Sr(II), Ba(II) and Hg(II) from other metal ions

Summary A rigorous analysis of the effect of various concentrations (0.02–1.60M) of ammonium acetate on the distribution coefficients (K) of a number of metal ions using cation exchanger Dowex 50W-X8 (100–200 mesh NH₄ ⁺-form) has been made. On account of the low affinity of U(VI) for resin in 0.20M NH₄OAc it can be separated from all other metal ions. HighK values of Sr(II), Ba(II) and Hg(II) at higher 0.50M NH₄OAc are responsible for their separation from others. The abnormal column Chromatographic behaviour of Al(III) permits its separation from other metal ions including U(VI), Sr(II), Ba(II), Hg(II). A number of binary and ternary separations have been achieved.     

LC–MS Determination of Gabapentin from Human Plasma

Gabapentin is an anticonvulsant drug used for the treatment of epilepsy. It is not bound to plasma protein and is not metabolized. A high performance liquid chromatography–mass spectrometric micro method is described in this report for its determination from human plasma. Chromatography was performed on a 50 × 4.6 mm, 4 μm nitrile column and the parent ion detected in the positive ionization mode on single quadrupole analyzer (Q1MI) with atmospheric pressure ionization source. Extraction was carried out on C₁₈, 100 mg/3cc cartridge using 10 μL sample volume. The mean extraction recovery was 97% and within batch and between batch coefficients of variation were <9%. Lack of interference from endogenous substances helped in achieving a highly sensitive method without the need for monitoring fragment ions. The lowest concentration injected on column for calibration curve was 195 pg (range 0.5–64 ng). The method was applied for analysis of samples from a cross-over bio-equivalence study comparing two formulations.     

Investigation of nu(N-H) and nu(C-N) stretching modes of propylamine (C3H7NH2) in a binary system C3H7NH2 + CH3OH via concentration dependent Raman study and ab initio calculations

Raman spectra of propylamine (C3H7NH2) and its binary mixtures, C3H7NH2 + CH3OH with varying mole fractions of the reference system, C3H7NH2, C were recorded in two widely apart wavenumber regions, 3100-3600 cm(-1) and 1225-1325 cm(-1). In the former region, the two Raman bands at approximately 3305 and approximately 3326 cm(-1), obtained after the line shape analysis, which were assigned to symmetric nu(N-H) and anti-symmetric nu(N-H) stretching modes, respectively, show a downshift upon dilution. However, whereas the nu(N-H) anti-symmetric mode shows a shift of 18.6 cm(-1), the nu(N-H) symmetric mode shows a much smaller shift (5.7 cm(-1)) between neat liquid and high dilution, C = 0.1. This aspect has been explained using the optimized geometries calculated employing ab initio theory (MP2 level) for the neat C3H7NH2 and its different hydrogen-bonded complexes. The linewidth versus concentration plot for the nu(N-H) anti-symmetric stretching mode, however exhibits a distinct maxima at C = 0.4, which has been explained as a slight departure from the concentration fluctuation model. In the latter region, a symmetric peak is observed, which corresponds to nu(C-N) stretching mode, which shows an upshift upon dilution and an almost linear concentration dependence. This has also been explained in terms of the parameters obtained from the optimized geometries of the different hydrogen-bonded complexes.     

Synthesis of chiral α-amino acids

A novel method for the synthesis of chiral α-amino acids has been developed where the acid functionality was constructed by oxidizing a hydroxymethyl group introduced by Evans’ method in the α-position of an appropriate acid substrate and the amino part came from the amide of the original carboxyl group following a modified Hofmann rearrangement reaction.     

Ultrasound-aided rapid and enhanced adsorption of anionic dyes from binary dye matrix onto novel hematite/polyaniline nanocomposite: Response surface methodology optimization

In recent times, polyaniline (PANI), a conducting polymer, has been studied widely for environmental remediation application due to its controllable electric conductivity with high surface area, which makes it a suitable adsorbent material. But lower mechanical stability of PANI is considered to be a serious drawback for its large-scale industrial application. To improve the mechanical strength of PANI, in this study, hematite nanoparticles were impregnated onto PANI by oxidative polymerization method in order to fabricate a novel organometallic nanocomposite (hematite-PANI-NC). The hematite-PANI-NC was used as adsorbent for removal of methyl orange (MO) and eosin yellow (EY) dye from binary dye matrix under ultrasonic-assisted adsorption. Excellent MO and EY dye removal (more than 98%) was observed from binary matrix at a wide solution pH from 2.0 to 6.0, and under ultrasound wave the adsorption equilibrium was achieved within 15 min only. Both MO and EY dyes adsorption experimental data strictly followed Langmuir isotherm, and maximum monolayer adsorption capacity of 126.58 mg/g and 112.36 mg/g was observed for MO and EY dye, respectively. The uptake mechanism of MO and EY dyes onto hematite-PANI-NC is governed by electrostatic interaction, π-π bonding and hydrogen bonding between dye molecules and nanocomposite. Response surface methodology analysis reveals maximum MO and EY removal of 98.43% and 99.35% at optimum experimental conditions. This study implies that the hybrid organometallic material hematite-PANI-NC has high potential for quick and enhanced sono-assisted uptake of anionic dyes from water near neutral solution pH.