TDPAC studies of Hf doped YBCO

Time differential perturbed angular correlation measurements of the 133–482 keVγ-γ cascade of¹⁸¹Ta in Hf-doped YBa₂Cu₃O_7−x are presented. The¹⁸¹Hf precurser nuclei are incorporated into the sample by thermal neutron irradiation. Two quadrupole interaction frequencies are observed in the as-irradiated sample:v _Q1=161±10 MHz with intensityf ₁=75%, asymmetry parameterη ₁=0.32 and damping parameter Λ₁=0.42, andv _Q2=1108±40 MHz withf ₂=25%,η ₂=0.62, and Λ₂=0.60. On annealing the sample in air at various temperaturesT _a and quenching to room temperature,f ₁ remained nearly constant forT _a<600°C andv _Q1 for all annealing temperatures indicating that these are insensitive to oxygen stoichiometry. This frequency is interpreted to be due to¹⁸¹Hf substitutingY sites. BeyondT _a=600°C,f ₁ increased and reached a constant value of 90% forT _a=800°C. The value ofv _Q2 showed a slight variation between 1086 and 1160 MHz, whilef ₂ remained nearly constant at 25% forT _a<600°C. This component is identified to be due to¹⁸¹Hf substituting Cu 1 sites in the Cu-O chains of YBCO. Above 600°Cv _Q2 decreased and reached a value of 808 MHz beyond 750°C.     

Effects of delayed linear electrical perturbation of the Belousov-Zhabotinsky reaction: a case of complex mixed mode oscillations in a batch reactor

Delayed feedbacks are quite common in many physical and biological systems and in particular many physiological systems. Delay can cause a stable system to become unstable and vice versa. One of the well-studied non-biological chemical oscillators is the Belousov-Zhabotinskii (BZ) reaction. This gives relaxation oscillations for a considerable period of time under batch conditions. This paper deals with the effect of perturbing the limit cycle oscillation of BZ reaction by employing a delayed electrical feedback to the system under batch conditions. The parameters chosen to study are external resistance and delay. For various resistances and delays the system was electrically perturbed and found to exhibit various complex mixed mode oscillations. The dynamic features are accounted for by the Oregonator model, with time delay incorporated in one of the variables. This revised version was published online in June 2006 with corrections to the Cover Date.     

Transformation of highly ordered large pore silica mesophases (Fm3m, Im3m and p6mm) in a ternary triblock copolymer-butanol-water system

Exceptional control of the phase behavior of highly ordered large pore mesostructured silica (with the choice of Fm3m, Im3m or p6mm symmetry) is achieved using a triblock copolymer (EO(106)PO(70)EO(106)) and butanol at low acid concentrations.     

Evidence for possible positive hole transport in the biological protein bovine serum albumin

Using the pulse radiolysis technique, the oxidation of the biological protein bovine serum albumin (BSA) by the species N ₃ ^. , CCl₃O ₂ ^. , OH and Br ₂ ^.– has been studied in aqueous solution. The repair of the N ₃ ^. oxidation by ascorbic acid and the effect of denaturing the protein on this repair has also been studied. The oxidation of Br ₂ ^.– seems to follow a different course from that of the other oxidizing agents suggesting the possibility of positive hole mobility in this protein. The repair by ascorbic acid is found more effective in the case of denatured protein. The rate constants for the reaction of Br ₂ ^– and N ₃ ^. are lower, in general, in the case of the denatured protein as compared with the undenatured BSA both at pH 6.9 and pH 10.7, suggesting that the convoluted structure of the protein plays a part in the process.     

Characterization of thermo-oxidative stability of polymer optical fibers using chemiluminescence technique

The thermo-oxidative stability of commercially available polymer optical fibers (POFs) and their components (cores and claddings) was investigated. All the bare POFs (core and cladding only) studied here were based on poly(methyl methacrylate) (PMMA) core. The fibers were exposed to 100 °C/low humidity for about 4200 h. Chemiluminescence (CL) technique was applied to investigate the thermo-oxidative stability and for measuring the transmission loss during exposure a prototype device called multiplexer was used. POFs exhibited variation in thermo-oxidative stability although they possessed identical core material PMMA. This was due to difference in the chemical compositions of claddings. Claddings were more susceptible to the thermo-oxidative degradation compared to cores. The thermo-oxidative degradation of both the cladding and the core was found in POFs as a result of climatic exposure. POFs showed an early drop-off followed by a slow decline of transmission. The early drop-off of transmission was attributed to physical changes like thermal expansion and the slow decline of transmission to chemical changes like oxidative degradation of POFs. A good linear relationship between optical transmission stability and thermo-oxidative stability of POFs was established from these studies.     

Thermogravimetric analysis of PVC/ELNR blends

The thermal behaviour of a series of solution-cast blends of polyvinyl chloride/epoxidised liquid natural rubber (ELNR) of different mole percentage of epoxidation has been examined using thermogravimetric analysis. Thermal degradation is found to occur through a two-step route in which the first step corresponds to the dehydrochlorination of PVC to form a polyene and the second step is attributed to the decomposition of the ELNR and the polyene. Introduction of 20 and 50 mol% of epoxy group into the liquid NR is found to enhance the thermal stability of PVC. Probable mechanisms of degradation have been suggested on the basis of the kinetic analysis of the degradation studies. It is found that the mechanism is influenced by the epoxy content of the blend system. Activation energy for the degradation and the entropy change have also been reported.     

Valency and molecular structure

Valency is defined for each molecular orbital. The molecular orbital valency values are shown to be a good measure of the bonding nature of the molecular orbital. Comparisons are made with photoelectron spectral studies and Mulliken overlap population analysis.The variation of molecular valency and molecular orbital valency with bond angle is studied. It is found that for all the molecules presently considered, energy is linearly related to valency and that the molecular valency reaches a maximum at the equilibrium bond angle. It is also shown that the molecular orbital valency can serve as a quantitatively reliable ordinate for Mulliken-Walsh diagrams.     

A novel and efficient oxidative biaryl coupling reaction of phenol ether derivatives using a combination of hypervalent iodine(III) reagent and heteropoly acid

A novel and efficient oxidative biaryl coupling reaction of phenol ether derivatives using a combination of hypervalent iodine(III) reagent, phenyliodine(III) bis(trifluoroacetate) (PIFA), and heteropoly acid has been developed.     

Highly chemoselective palladium-catalyzed Sonogashira coupling of 5-iodouridine-5′-triphosphates with propargylamine: a new efficient method for the synthesis of 5-aminopropargyl-uridine-5′-triphosphates

An efficient palladium-catalyzed Sonogashira coupling of 5-iodouridine-5′-triphosphates with propargylamine is described. The catalytic reaction is highly chemoselective that affords exclusively 5-aminopropargyl-uridine-5′-triphosphates in good yields with high purities (>99.8%).     

Convenient Synthesis of Nucleoside‐5′‐Diphosphates from the Corresponding Ribonucleoside‐5′‐phosphoroimidazole

The reaction of ribonucleoside‐5′‐phosphoroimidazolide with a tributylammonium orthophosphate in anhydrous dimethylformamide at room temperature provides a general method for the synthesis of nucleoside‐5′‐diphosphates. The novelty of the approach is to use the triethylammonium salt of 5′‐monophosphate nucleoside derivative prior to the imidazolate reaction with imidazole, triphenylphosphine, and 2,2′‐dithiodipyridine. Deprotection, followed by displacement of the imidazole moiety using tributylammonium orthophosphate and a catalytic amount of zinc chloride in dimethylformamide gave the desired 5′‐diphosphate products. The triethyl ammonium salt of 5′‐diphosphate nucleosides was purified by flash chromatography using DEAE (diethylaminoethyl weak anion exchange resin) Sepharosa fast flow packed in an XK 50/60 column on an Akta FPLC (Fast Protein Liquid Chromatography). Synthesis procedures are reported for adenosine‐5′‐diphosphate, uridine‐5′‐diphosphate, cytidine‐5′‐diphosphate, and guanosine‐5′‐diphosphate. Yields for the displacement reactions ranged from 95 to 97%. Thus, this method offers the advantages of shorter reaction time, greater product yield, and a more cost‐effective synthetic route.