Palladium-catalyzed cross-coupling of benzylzinc reagents with 2-bromo-3,3,3-trifluoropropene

α-Trifluoromethyl alkenes can be used as peptide isosteres, moreover, the pre-installed vinyl group make it possible that transformation to diverse fluorine-containing unities. However, the cross-coupling of benzyl group with α-trifluoromethyl alkenes has yet to be developed. In this report, we describe a general method for the cross-coupling of benzylzinc reagents with 2-bromo-3,3,3-trifluoropropene (BTP) to afford diverse α-trifluoromethylalkene derivatives by using Pd(TFA)₂ as catalyst. This method takes advantage of cheap industrial available fluorine building blocks and easily prepared benzylzinc reagents to generate α-trifluoromethylalkene derivatives, which features with mild reaction conditions, wide substrate scope and feasibility of product transformations.     

Efficient difluoromethylation of isoflavonoids and flavonoid under mild conditions

A simple and efficient protocol for difluoromethylation of isoflavones, flavonoids, and coumarins has been developed. The protocol uses readily available, non-ozone-depleting and easy handling BrCF₂PO(OEt)₂ as difluorocarbene precursor. The reaction underwent the formation of difluorocarbene under mild reaction conditions with relatively weak base therefore demonstrates high selectivity. Application of the reaction led to difluoromethylated biologically relevant molecules.     

低温生长Cu(InGa)Se2薄膜吸收层的掺钠工艺研究

在柔性聚酰亚胺衬底上低温制备Cu(In,Ga)Se₂薄膜太阳能电池, Na的掺入会改善电池特性, 但不同的掺Na工艺对Cu(In,Ga)Se₂薄膜和器件特性的改善机理不同. 本实验通过对比前掺NaF和后掺NaF工艺发现, 在前掺Na工艺下, 由于Na始终存在于Cu(In,Ga)Se₂薄膜生长过程中, Na存在于多晶 Cu(In,Ga)Se₂ 薄膜晶界处, 起到了扩散势垒的作用, 导致晶粒细碎、加剧两相分离, 同时减小了施主缺陷的形成概率; 而在后掺Na工艺下, 掺入的Na对薄膜的结构及生长不产生影响, 仅仅起到了钝化施主缺陷、改善薄膜缺陷态的作用. 同时, 研究表明, 后掺Na工艺中, NaF必须依靠外界能量辅助才能扩散进Cu(In,Ga)Se₂内部, 实验结果证实, 只有衬底温度达到350 ℃以上时, 掺入的NaF才能较好地改善薄膜特性. 最终经掺Na工艺的优化, 得到低温工艺制备的柔性聚酰亚胺衬底器件效率达10.4%.     

系列烷基芳基磺酸盐在水溶液中胶束化的焓-熵补偿现象

以表面张力法研究了系列烷基芳基磺酸盐在水溶液中胶束化的热力学性质,并考察了温度与分子结构对胶束化的影响.结果表明,烷基芳基磺酸盐在水溶液中胶束化是一个自发过程,主要来自熵驱动;随着温度升高,先有利于胶束化而后又不利于胶束化,且熵变对吉布斯自由能变的贡献有下降趋势,而焓变的贡献有增大趋势;胶束化存在焓-熵补偿现象,补偿温度Tc均在(306±2)K,基本不随烷基芳基磺酸盐的分子结构的改变而变化;随着芳环上短烷基链或长烷基链碳数的增加,胶束化能力和胶束的稳定性均提高,而随着芳环向长烷基链中间位置移动,胶束化能力和胶束的稳定性均下降.     

Green Monomer of CO_2 and Alkyne-based Four-component Tandem Polymerization toward Regio-and Stereoregular Poly(aminoacrylate)s

Green monomers, such as carbon dioxide(CO_2), are closely related to our daily life and highly desirable to be transferred to functional polymers with diverse structures and versatile properties because they are abundant, cheap, nontoxic, renewable, and sustainable. However, the polymerizations based on these green monomers are to be further developed. In this work, a facile CO_2 and alkyne-based one-pot, two-step, fourcomponent tandem polymerization was successfully established. The polymerization of CO_2, diynes, alkyl dihalides, and primary/secondary amines can proceed under mild reaction conditions and regio-and stereoregular poly(aminoacrylate)s with good solubility and thermal stability were obtained in high yields(up to 95%). Notably, distinctly different stereoregularity of resultant poly(aminoacrylate)s was realized via using primary or secondary amines. Using the former would readily generate polymers with 100% Z-isomers, whereas the latter furnished products with over 95% E-isomers. Through different monomer combination, the polymers with tunable structures and properties were obtained.Moreover, the tetraphenylethene units containing poly(aminoacrylate)s, showing the unique aggregation-induced emission characteristics,could function as a fluorescent probe for sensitive explosive detection. Thus, this work not only develops a facile CO_2 and alkyne-based multicomponent tandem polymerization but also provides a valuable strategy to fine-tune the polymer structures and properties, which could be potentially applied in diverse areas.     

原子吸收光谱法测定女贞属苦丁茶中金属含量

用火焰原子吸收光谱法测定贵州不同产地的女贞属苦丁茶中Cu、Zn、Ca,Mg 4种金属的含量,并比较含量差异.测定结果表明,女贞属苦丁茶中4种金属元素的含量较高,Cu元素含量为11.28-18.15μg·g-1、Zn元素含量为25.92-43.21μg·g-1、Ca元素含量为2371-12091μg·g-1、Mg元素含量...     

可聚硼酸酯表面活性剂的表面化学性质及与LAS相互作用

用表面张力法研究了可聚合硼酸酯表面活性剂(BES)水溶液不同温度下(288-313 K)的表面活性和热力学函数变化；考察了BES与十二烷基苯磺酸钠(LAS)在0.5 mol·L-1 NaCl溶液中的相互作用. 结果表明, 298 K时, BES临界胶束浓度cmc达到0.066 mmol·L-1, γcmc为29.2 mN·m-1；在所考察的温度范围内BES胶束形成自由能(ΔG0m)在-22.4 - -25.8 kJ·mol-1之间, 胶束形成是熵驱动过程. BES/LAS混合体系为具有较大负偏差的非理想体系, BES/LAS分子间平均相互作用参数βm=-3.48；当溶液体相中BES摩尔分数αBES＝0.5时, 混合胶束中BES摩尔分数X1m为0.46, |βm|达到最大, 而且此时混合溶液cmc为0.017 mmol·L-1, 达到最低, γcmc为27.8 mN·m-1.     

Synthesis of quaternary 8-(1-acylethene-1-yl)-13-methylcoptisine chlorides and their selective growth inhibitory activity between human cancer cell lines and normal intestinal epithelial cell-6

Quaternary 8-(1-acylethene-1-yl)-13-methylcoptisine chlorides targeting TrxRs were designed and synthesized. An in vitro evaluation for the growth inhibitory activities against cancer cell lines and for the viability of the normal intestinal epithelial cell-6 cell line is reported.     

十五烷基芳基磺酸钠溶液表面性质的影响因素研究

测定了自制的四种高纯度十五烷基间二甲苯磺酸钠在纯水溶液和0.0393 mol/L异丙醇溶液中的表面性质,结果表明,随芳基向碳链中间位置的移动,临界胶束浓度cmc增大,分子极限占有面积Amin增大,标准吸附自由能 变得更负,降低表面张力的效率pc20增强,饱和吸附量Γ_max降低,临界胶束浓度时的表面张力γ_cmc降低;且异丙醇的加入使磺酸钠溶液的临界胶束浓度显著降低。从分子结构的特点探讨了分子支化程度对表面性能的影响。