Bismuth compounds in organic synthesis. A one-pot synthesis of homoallyl ethers and homoallyl acetates from aldehydes catalyzed by bismuth triflate

[reaction: see text] Three one-pot methods for the conversion of aldehydes to homoallyl ethers catalyzed by Bi(OTf)(3).xH(2)O (1 < x < 4) have been developed. The one-pot synthesis of homoallyl ethers can be achieved either by in situ generation of the acetal followed by its reaction with allyltrialkylsilane or by a three-component synthesis in which the aldehyde, trimethylorthoformate or an alkoxytrimethylsilane and allyltrimethylsilane are mixed together in the presence of bismuth triflate (0.1-1.0 mol %). In addition, a three-component synthesis of homoallyl acetates, which is achieved by reacting the aldehyde, acetic anhydride, and allyltrimethylsilane in the presence of bismuth triflate (3.0-5.0 mol %), has been developed. The use of a relatively nontoxic, easy to handle, and inexpensive catalyst adds to the versatility of these methods.     

Voltammetric, chronocoulometric and spectroelectrochemical studies of electropolymerized films based on Co(III/II)- and Zn(II)-4,9,16,23-tetraaminophthalocyanine: effect of high pH

Electropolymerized thin films of Co(III/II)- and Zn(II)-4,9,16,23-tetraaminophthalocyanine, immersed in solutions of relatively high pH, have been studied electro- and spectroelectrochemically. Cyclic voltammetry and chronocoulometry were used to characterize films deposited on glassy carbon electrodes. Spectroelectrochemistry and ellipsometry measurements were performed on indium tin oxide (ITO) surfaces coated with the zinc and cobalt complexes and correlated to the electrochemical information collected using glassy carbon electrodes. Studies at high pH are motivated by the efficient increase in luminol chemiluminescence at high OH⁻ concentration, and by potential application in luminescence sensors. Although the films are not removed, some structural changes occur when they are exposed to solutions of high pH. In addition, an estimation of the number of monolayers has also been calculated. The atomic diameters of cobalt and zinc are very close in value, but the estimated number of monolayers, based on cyclic voltammetric data, for a given number of electropolymerization cycles is approximately four-fold higher in the zinc-based film. This would correspond to three-fold thicker films when zinc is the central metal ion. Ellipsometry measurements have been correlated with cyclic voltammetric data to confirm that film thickness varies among the different complexes, even though the conditions of electropolymerization are the same.     

Comparison of solid-phase extraction methods for the determination of azaspiracids in shellfish by liquid chromatography-electrospray mass spectrometry

Azaspiracids have been identified as the cause of a new toxic syndrome called azaspiracid poisoning (AZP) that has led to incidents of human intoxications throughout Europe following the consumption of mussels. Although five AZP toxins have been structurally elucidated to-date, azaspiracid (AZA1), 8-methylazaspiracid (AZA2) and 22-demethylazaspiracid (AZA3) are the predominant toxins. Separation of the three main AZP toxins was achieved using reversed-phase liquid chromatography (LC) and coupled to an electrospray ionisation source of an ion-trap mass spectrometer. Five reversed-phase (C18) and three diol solid-phase extraction (SPE) cartridges were compared for their efficacy in the cleanup of shellfish matrix. The comparison was based on the optimum recoveries of AZA1, AZA2 and AZA3 from extracts of mussel tissues. LC-electrospray MS3 analysis was used to quantify the AZP toxins in wash and eluate fractions in the SPE studies. Good recovery and reproducibility data were obtained for one diol SPE cartridge and two C18 SPE cartridge types.     

Anatoxins and degradation products, determined using hybrid quadrupole time-of-flight and quadrupole ion-trap mass spectrometry: forensic investigations of cyanobacterial neurotoxin poisoning

The potent neurotoxins from cyanobacteria, anatoxin-a (AN), its methyl analogue, homoanatoxin-a (HMAN), and their degradation products, have been studied using nano-electrospray hybrid quadrupole time-of-flight mass spectrometry (QqTOF-MS). The anatoxin degradation products, which are readily produced in vivo by either reduction or epoxidation, were also examined in this study. The high mass accuracy QqTOF-MS data was used to confirm formula assignments for major product ions and quadrupole ion-trap (QIT)-MS was used to construct fragmentation pathways for anatoxins. Significant differences between these fragmentation pathways were observed. Comparisons between the spectra of compounds that differ in side-chain length (the AN and HMAN series) were used to identify ions that are characteristic of the homologues. The application to forensic samples in which the principal neurotoxin had undergone rapid biodegradation has been demonstrated and used to confirm anatoxin poisoning of dogs.     

A maximum likelihood estimator to distinguish single molecules by their fluorescence decays

We have developed a maximum likelihood estimator to distinguish between similar molecules at the single molecule level based upon fluorescence decay measurements. Time resolved fluorescence measurements for single Rhodamine 6G and tetramethylrhodamine isothiocyanate molecules in fluid flow are derived from time-correlated single photon counting. A maximum likelihood estimator is developed and applied to data from a mixture of molecules. Single molecules are identified and distinguished by their fluorescence time decays. Comparison is made between identification error rates and theoretical predictions. To our knowledge, this is the first reported example of single molecule identification by fluorescence decay in a mixture.     

Prediction of CL-20 chemical degradation pathways,theoretical and experimental evidence for dependence on competing modes of reaction

Highest occupied and lowest unoccupied molecular orbital energies, formation energies, bond lengths and FTIR spectra all suggest competing CL-20 degradation mechanisms. This second of two studies investigates recalcitrant, toxic, aromatic CL-20 intermediates that absorb from 370 to 430?nm. Our earlier study (Struct. Chem., 15, 2004) revealed that these intermediates were formed at high OH^? concentrations via the chemically preferred pathway of breaking the C–C bond between the two cyclopentanes, thereby eliminating nitro groups, forming conjugated π bonds, and resulting in a pyrazine three-ring aromatic intermediate. In attempting to find and make dominant a more benign CL-20 transformation pathway, this current research validates hydroxylation results from both studies and examines CL-20 transformations via photo-induced free radical reactions. This article discusses CL-20 competing modes of degradation revealed through: computational calculation; UV/VIS and SF spectroscopy following alkaline hydrolysis; and photochemical irradiation to degrade CL-20 and its byproducts at their respective wavelengths of maximum absorption.     

Analysis of the quantum numbers J(PC) of the X(3872) particle

We present an analysis of angular distributions and correlations of the X(3872) particle in the exclusive decay mode X(3872)-->J/psipi+ pi- with J/psi-->mu+ mu-. We use 780 pb-1 of data from pp[over ] collisions at sqrt[s]=1.96 TeV collected with the CDF II detector at the Fermilab Tevatron. We derive constraints on spin, parity, and charge conjugation parity of the X(3872) particle by comparing measured angular distributions of the decay products with predictions for different J(PC) hypotheses. The assignments J(PC)=1++ and 2-+ are the only ones consistent with the data.     

Measurement of the top-quark mass in all-hadronic decays in pp collisions at CDF II

We present a measurement of the top-quark mass Mtop in the all-hadronic decay channel tt-->W+bW-b-->q1q2bq3q4b. The analysis is performed using 310 pb-1 of sqrt[s]=1.96 TeV pp[over ] collisions collected with the CDF II detector using a multijet trigger. The mass measurement is based on an event-by-event likelihood which depends on both the sample purity and the value of the top-quark mass, using 90 possible jet-to-parton assignments in the six-jet final state. The joint likelihood of 290 selected events yields a value of Mtop=177.1+/-4.9(stat)+/-4.7(syst) GeV/c2.     

Periodic Crystallisation of Magnesium Hydroxide in Agar-Agar Gel

Investigations are made to get the experimental conditions for obtaining periodic crystallisation of magnesium hydroxide in agar-agar gel. A detailed study is made on the dependence of the velocity constant (K), the spacing coefficient \documentclass{article}\pagestyle{empty}\begin{document}$ \left( {p = \frac{{x_{n + 1} }}{{x_n }}} \right)'$\end{document} the length of the continuous precipitate and the width of the rings on the concentrations of the inner and outer electrolytes. Using SHINOHARA 's revised coagulation theory, the flocculation value F is calculated. F = Γ + C₃₀, where Γ is the characteristic concentration of the outer electrolyte for which the flocculation starts and C₃₀ is the reduced concentration of the reaction product. The value of the concentration of the outer electrolyte for which the flocculation stops (γ) is calculated. The dependence of F on the concentrations of the reactants is also discussed. Observation of a coneshaped precipitation is also reported.