Thermodynamic Properties and Melting Behavior of Bi–Sn–Zn Alloys

Summary. The partial and integral enthalpies of mixing of liquid Bi–Sn–Zn alloys were determined at 500°C by a drop calorimetric technique using a Calvet-type microcalorimeter. The ternary interaction parameters in the Bi–Sn–Zn system were fitted using the Redlich-Kister-Muggianu model for substitutional solutions, and isoenthalpy curves of the integral molar enthalpy of mixing at 500°C were constructed. Furthermore, a DSC technique was used to determine the liquidus temperatures in three sections (3, 5, and 7 at.% Zn) as well as the invariant reaction temperature of the ternary eutectic L ⇄ (Bi) + (Sn) + (Zn). The ternary eutectic reaction was found at 135°C.     

Kinetics of unusual photoinduced currents in the solid state of some ferrocene derivatives

Kinetics of change in photoinduced currents (during illumination and after switching off light source) in the solid state of some ferrocene derivatives, namely, ferrocenecarboxylic acid, acetylferrocene, ferrocenecarbaldehyde, hydroxymethyl ferrocene have been studied in dry nitrogen gas atmosphere. Unusual/anomalous photocurrent versus time profiles were observed in some ferrocene derivatives at certain cell temperatures. The kinetics of current changes under photoexcitation and after switching off the light source have been observed to be complicated in nature. Temperature-dependent behavior of the studied kinetics indicates that charge carrier trapping/detrapping and recombination processes are significantly temperature dependent. These processes have an important role in causing the temperature dependent unusual/anomalous photocurrent versus time profiles in the ferrocene derivatives studied.     

Patterning Flexible Substrates Using Surface Relief Structures in Azobenzene Functionalized Polymer Films

A novel method for maskless micro-patterning of polymeric substrates is presented. First, an azobenzene functionalized polymer film is spin-coated on a Poly (ethylene terephthalate) (PET) sheet. Then surface relief structures are optically inscribed on the polymer film by interference of laser beams. The patterned azobenzene functionalized film is then etched in the plasma chamber such that the gratings are transferred to the PET substrate. Finally, any remaining azobenzene functionalized polymer is dissolved away using an appropriate solvent. This method of patterning can be broadly applied to a variety of flexible/polymeric substrates and the resolution is not limited by the substrate thermo-mechanical properties.     

Separation of lignosulfonate from its aqueous solution using supported liquid membrane

This paper presents an experimental and theoretical study on facilitated transport of lignosulfonate (LS) through a flat sheet supported liquid membrane using trioctylamine (TOA) as carrier and dichloroethane as diluent. The studies were carried out with various support materials and operating conditions (viz. carrier concentration, strip phase concentration, salt concentration, etc.) and their effects on the transport of LS. The results were analyzed to identify a suitable combination of support and operating condition that would yield best performance of the supported liquid membrane (SLM) in terms of fast and efficient transport of LS. The stability of the SLM was assessed in terms of loss of liquid from the pores of membrane support. The SLM is found to be stable till 10 h. Co-transport mechanism has been adopted in this work by using NaOH as the strip phase. It was observed that extraction of LS is increased with increase in concentration of NaOH up to a limiting value of 0.5 M NaOH. Difference of salt concentration between feed and strip phase considerably affect the separation process. The diffusional resistances of organic membrane (Δorg) and aqueous solution (Δaq) calculated from the permeation model, which is again a combination of three unique mechanisms viz., diffusion through a feed aqueous layer, a fast interfacial chemical reaction, and diffusion of carrier–complex through the organic membrane, are found to be 609.9 and 176.6 s cm⁻¹, respectively. The values of the diffusion coefficient in the membrane (D_org) and in the bulk organic phase (D_complex) are 1.67×10⁻⁹ and 6.68 × 10⁻⁸ m²s⁻¹, respectively. The extraction of LS is about 90%. Nearly 43% of LS can be recovered at optimum condition.     

Simultaneous separation of mercury and lignosulfonate from aqueous solution using supported liquid membrane

This paper presents an experimental investigation on facilitated and simultaneous transport of mercury and lignosulfonate (LS) through a flat sheet supported liquid membrane (SLM) having Nylon 6,6 as support, trioctylamine (TOA) as carrier and dichloroethane as solvent. The experiments were performed at various operating conditions such as strip phase concentration, feed pH, carrier concentration and feed concentration to find the best set of parameters that would yield the maximum separation of pure mercury as well as its mixture with LS. The experiments were performed in co-transport mode using NaOH as the strip phase. It was observed that extraction of mercury as well as its mixture increases with increase in concentration of NaOH up to a certain limit 0.1 M NaOH in case of pure solution and 0.2 M NaOH in case of mixture). Feed phase pH significantly affects the mercury separation process. However, initial feed concentration does not affect the extraction process appreciably. Separation of mixture of mercury and LS behaves in a similar way as their pure solution; however the extraction is low in comparison to pure solution. The extraction of mercury from its pure solution is about 81% in 1 h. The extraction of mercury and LS from their mixture is about 52.6% and 50.2%, respectively at optimum condition and in a period of 2 h.     

Competition between hydrogen bonding and dispersion interactions in the indole···pyridine dimer and (indole)2···pyridine trimer studied in a supersonic jet

Structures of the indole···pyridine dimer and (indole)2···pyridine trimer have been investigated in a supersonic jet using resonant two-photon ionization (R2PI) and IR-UV double resonance spectroscopic techniques combined with quantum chemistry calculations. R2PI spectra of the dimer and the trimer recorded by electronic excitation of the indole moiety show that the red-shift in the band origin of the dimer with respect to the 0(0)(0) band of the monomer is larger compared to that of the trimer. The presence of only one conformer in the case of both the dimer and the trimer has been confirmed from IR-UV hole-burning spectroscopy. The structures of the dimer and the trimer have been determined from resonant ion dip infrared (RIDIR) spectra combined with ab initio as well as DFT/M05-2X and DFT/M06-2X calculations. It has been found that the dimer, observed in the experiment, has a V-shaped geometry stabilized by N–H···N and C–H···N hydrogen bonding interactions, as well as C–H···π and π···π dispersion interactions. The geometry of the trimer has been found to be a cyclic one stabilized by N–H···N, N–H···π, C–H···π, and C–H···N interactions. The most important finding of this current study is the observation of the mixed dimer and trimer, which are stabilized by hydrogen bonding as well as dispersion interactions.     

Macrocyclic paracyclophane synthesis

Macrocyclic stilbene derivatives are prepared using strong base to couple the terminal carbons of 1,12-bis-[4-chloromethylphenyl]-dodecane and its homologs.     

A pseudobinary approach to study interdiffusion and the Kirkendall effect in multicomponent systems

Interdiffusion studies become increasingly difficult to perform with the increasing number of elements in a system. It is rather easy to calculate the interdiffusion coefficients for all the compositions in the interdiffusion zone in a binary system. The intrinsic diffusion coefficients can be calculated for the composition of Kirkendall marker plane in a binary system. In a ternary system, however, the interdiffusion coefficients can only be calculated for the composition where composition profiles from two different diffusion couples intersect. Intrinsic diffusion coefficients are possible to calculate when the Kirkendall markers are also present at that composition, which is a condition that is generally difficult to satisfy. In a quaternary system, the composition profiles for three different diffusion couples must intersect at one particular composition to calculate the diffusion parameters, which is a condition that is almost impossible to satisfy. To avoid these complications in a multicomponent system, the average interdiffusion coefficients are calculated. I propose a method of calculating the intrinsic diffusion coefficients and the variation in the interdiffusion coefficients for multicomponent systems. This method can be used for a single diffusion couple in a multicomponent pseudobinary system. The compositions of the end members of a diffusion couple should be selected such that only two elements diffuse into the interdiffusion zone. A few hypothetical diffusion couples are considered in order to validate and explain our method. Various sources of error in the calculations are also discussed.     

A Note on the Construction of Orthogonal Latin Hypercube Designs

Latin hypercube designs have been found very useful for designing computer experiments. In recent years, several methods of constructing orthogonal Latin hypercube designs have been proposed in the literature. In this article, we report some more results on the construction of orthogonal Latin hypercubes which result in several new designs.