Pinacol-Pinacolone Rearrangement of 1, 2-Di-(p-methoxyphenyl)-ethane-1, 2-diol and Bis-(4-methoxyphenyl)-acetaldehyde in Acid Media

1, 2-Di-(p-methoxyphenyl)-ethane-1, 2-diol gave in acid media bis-(4-methoxy-phenyl)-acetaldehyde, 4-4′-dimethoxy-deoxybenzoin, and 1, 2-di-(p-methoxyphenyl)-ethylene oxide; their respective yields being influenced by at least 3 factors: (i) the acid, (ii) its concentration, and (iii) the reaction period. Bis-(4-methoxyphenyl)-acetaldehyde rearranged to the deoxybenzoin in boiling sulfuric (50%) or phosphoric (75%) acids (w/w), and to two isomeric 1, 2-diacetoxy-1, 2-di-(p-methoxyphenyl) ethanes when it was heated with acetic anhydride. The mechanisms of these reactions are discussed.     

Preparation of Diazo Phenyl Sulfides. Kinetics and Mechanism of the Diazo Coupling Reaction of p-Nitrobenzenediazo Phenyl Sulfide with β-Naphthol under Various Conditions

Aryldiazophenyl sulfides prepared from diazotised arylamines and thiophenol at controlled pH, are coupled with β-naphthol yielding the corresponding azo dye. A kinetic study of the diazo coupling reaction of p-nitrobenzenediazo phenyl sulfide with β-naphthol under various conditions revealed that the reaction is of first order kinetics with respect to the diazo phenyl sulfide, and that the rate of coupling measured colorimetrically is influenced by the hydrogen ion concentration and by the ionising power of the medium.     

Gravimetric and Colorimetric Determinations of Copper,Cobalt, Zinc and Mercury with 1-(2-Methylindole-3-Acetyl)-4-Arylthiosemicarbazide

1-(2-Methylindole-3-acetyl)4-arylthiosemicarbazides have been prepared and were used as reagents for gravimetric and colorimetric determinations of copper, cobalt, zinc and mercury. The synthesis of the same metal complexes of these thiosemicarbazides as a potential biological derivatives was also described.     

Characterization and elimination of the interfering effects of foreign species in the atomic-absorption determination of iron

The inhibition-release titration method has been used to study interference effects in flame atomic-absorption determination of iron. Interferences from anions, cations and complexing agents with the atomic-absorption of iron when a stoichiometric air-acetylene flame is used, can be obviated by a preliminary treatment of the sample solution with sulphosalicylic acid to convert the iron into the same complex before aspiration, thus giving a constant environment for the iron in the flame processes.     

Visible upconversion and infrared luminescence investigations of Al<Subscript>2</Subscript>O<Subscript>3</Subscript> powders doped with Er<Superscript>3+</Superscript>, Yb<Superscript>3+</Superscript> and Zn<Superscript>2+</Superscript> ions

Alumina (Al₂O₃) powders doped with Er³⁺, Yb³⁺ and Zn²⁺ ions have been prepared by a low-temperature combustion synthesis technique. The phase purity and crystalline structure of the combustion products are confirmed by powder X-ray diffraction. An efficient frequency upconversion in the visible region and the emission in the infrared (IR) region respectively corresponding to the ²H_11/2, ⁴S_3/2→⁴I_15/2, ⁴F_9/2→⁴I_15/2 and ⁴I_13/2→⁴I_15/2 transitions upon direct excitation with a CW laser lasing at ∼980 nm are discussed. The enhancement observed in the intensity of the upconversion emission bands in the visible region and the emission band in the IR region due to the presence of Yb³⁺ and Zn²⁺ in Er³⁺:Al₂O₃ powders is reported and explained in detail.     

Infrared and visible emission of Er in combustion-synthesized CaAl2O4 phosphors

New near-infrared luminescent, monoclinic CaAl₂O₄:Er³⁺ phosphor was prepared by using the combustion route at furnace temperatures as low as 500 °C in a few minutes. Combustion synthesized phosphor has been well characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy-dispersive analysis of X-ray (EDAX) mapping studies. The luminescence spectra of Er³⁺-doped calcium aluminate were studied at UV (380 nm), vis (488 nm) and IR (980 nm) excitation. Upon UV and vis excitation, the CaAl₂O₄:Er³⁺ phosphor exhibits emission bands at ~523 nm and at ~547 nm, corresponding to transitions from the ²H_11/2 and ⁴S_3/2 erbium levels to the ⁴I_15/2 ground state. A strong luminescence at 1.55 μm in the infrared (IR) region due to ⁴I_13/2→⁴I_15/2 transition has been observed in CaAl₂O₄:Er³⁺ phosphor upon 980 nm CW pumping. In the spectrum of IR-excited up-conversion luminescence, green (~523 and ~547 nm) and red (662 nm) luminescence bands were present, the latter associated with the ⁴F_9/2→⁴I_15/2 transitions of Er³⁺ ions. Both excited state absorption and energy transfer may be proposed as processes responsible for the population of the ⁴S_3/2 and ⁴F_9/2 erbium levels upon IR excitation. The mechanisms responsible for the up-conversion luminescence are discussed.     

Comparative Study of Some Methods for the Determination of the Analgesic Anti-Inflammatory Compound “IS4”: 4-(Anisylideneamino) Antipyrine

A comparative study of some quantitative methods has been undertaken. Chemical and colorimetric procedures have been developed for the determination of IS₄: 4-(anisylideneamino) antipyrine. The non-aqueous titration and the nitritometric techniques were used. The formation of colored azo dye derivatives through diazotization and coupling with phenolic and amine reagents has been the basis of the colorimetric determination. Statistical analysis of the results has shown that a good agreement of the results has been found on applying the proposed methods to 4-aminoantipyrine.     

Certified reference material for radionuclides in seawater IAEA-381 (Irish Sea Water)

A certified reference material (CRM) for radionuclides in seawater, IAEA-381 (Irish Sea Water), is described and the results of certification are presented. The material has been certified for nine radionuclides (⁴⁰K, ⁹⁰Sr, ¹³⁷Cs, ²³⁷Np, ²³⁸Pu, ²³⁹Pu,²⁴⁰Pu, ^239,240Pu and ²⁴¹Am). Information on massic activities with the corresponding 95% confidence intervals are given for eight radionuclides (³H, ¹²⁵Sb, ²³⁴U, ²³⁵U, ²³⁶U, ²³⁸U, ²⁴¹Pu and ²⁴⁴Cm). Less reported radionuclides include ⁶⁰Co, ⁹⁹Tc, and ²⁴²Pu. The CRM may be used for quality assurance/quality control of the analysis of radionuclides in environmental water samples, for the development and validation of analytical methods and for training purposes. The material is available from the IAEA in 5 kg units.     

Microdetermination of Mn, Fe, Co, Ni, Cu, Zn, Ag, Cd, Hg, Pb, Bi and U in inorganic and organometallic compounds with morpholinium morpholine-N-dithiocarboxylate

The chelates of morpholinium morpholine-N-dithiocarboxylate with manganese(II), iron(II), iron(III), cobalt(II), nickel, copper(II), zinc, silver, cadmium, mercury(II), lead, bismuth and uranium(VI) have been prepared and their compositions elucidated. Simple, accurate and relatively rapid procedures for the gravimetric and titrimetric microdetermination of these metals in inorganic and organometallic compounds are presented.     

Halogenation of Xanthenyl and Thioxanthenylallenes

Reactions of acids with vinylidenexanthenes (or thioxanthenes) 1 and 9-methoxy-9-vinylxanthenes (or thioxanthenes) 8 give xanthene- (or thioxanthene-) 9-spiro-1′-indenes 7 . With bromine or sulfuryl chloride they give the corresponding 2′-halogenoxanthene- (or thioxanthene-)9-spiro-1′-indenes 5 . Formation of such derivatives depends on preferential attack of the reagents on allenes 1 to give initially xanthylium (or thioxanthylium) ions 3 which cyclize. One π bond of the allenes 1 can be selectively reduced in acid media. Chemical and spectral evidence for these routes are presented.