An updated review of nanofluids in various heat transfer devices

Journal of Thermal Analysis and Calorimetry - The field of nanofluids has received interesting attention since the concept of dispersing nanoscaled particles into a fluid was first introduced in...     

New Composite Sorbent for Removal of Sulfate Ions from Simulated and Real Groundwater in the Batch and Continuous Tests

The evaluation of groundwater quality in the Dammam formation, Faddak farm, Karbala Governorate, Iraq proved that the sulfate (SO₄²⁻) concentrations have high values; so, this water is not suitable for livestock, poultry and irrigation purposes. For reclamation of this water, manufacturing of new sorbent for permeable reactive barrier was required through precipitation of Mg and Fe hydroxides nanoparticles on the activated carbon (AC) surface with best Mg/Fe molar ratio of 7.5/2.5. Mixture of 50% coated AC and 50% scrap iron was applied to eliminate SO₄²⁻ from contaminated water with efficiency of 59% and maximum capacity of adsorption equals to 9.5 mg/g for a time period of 1 h, sorbent dosage 40 g/L, and initial pH = 5 at 50 mg/L initial SO₄²⁻ concentration and 200 rpm shaking speed. Characterization analyses certified that the plantation of Mg and Fe nanoparticles onto AC was achieved. Continuous tests showed that the longevity of composite sorbent is increased with thicker bed and lower influent concentration and flow rate. Computer solution (COMSOL) software was well simulated for continuous measurements. The reclamation of real contaminated groundwater was achieved in column set-up with efficiency of 70% when flow rate was 5 mL/min, bed depth was 50 cm and inlet SO₄²⁻ concentration was 2301 mg/L.     

A Comprehensive Review for Groundwater Contamination and Remediation: Occurrence,Migration and Adsorption Modelling

The provision of safe water for people is a human right; historically, a major number of people depend on groundwater as a source of water for their needs, such as agricultural, industrial or human activities. Water resources have recently been affected by organic and/or inorganic contaminants as a result of population growth and increased anthropogenic activity, soil leaching and pollution. Water resource remediation has become a serious environmental concern, since it has a direct impact on many aspects of people’s lives. For decades, the pump-and-treat method has been considered the predominant treatment process for the remediation of contaminated groundwater with organic and inorganic contaminants. On the other side, this technique missed sustainability and the new concept of using renewable energy. Permeable reactive barriers (PRBs) have been implemented as an alternative to conventional pump-and-treat systems for remediating polluted groundwater because of their effectiveness and ease of implementation. In this paper, a review of the importance of groundwater, contamination and biological, physical as well as chemical remediation techniques have been discussed. In this review, the principles of the permeable reactive barrier’s use as a remediation technique have been introduced along with commonly used reactive materials and the recent applications of the permeable reactive barrier in the remediation of different contaminants, such as heavy metals, chlorinated solvents and pesticides. This paper also discusses the characteristics of reactive media and contaminants’ uptake mechanisms. Finally, remediation isotherms, the breakthrough curves and kinetic sorption models are also being presented. It has been found that groundwater could be contaminated by different pollutants and must be remediated to fit human, agricultural and industrial needs. The PRB technique is an efficient treatment process that is an inexpensive alternative for the pump-and-treat procedure and represents a promising technique to treat groundwater pollution.     

Chemical Composition,Antioxidant, Anti-Bacterial,and Anti-Cancer Activities of Essential Oils Extracted from Citrus limetta Risso Peel Waste Remains after Commercial Use

Citrus plants are widely utilized for edible purposes and medicinal utility throughout the world. However, because of the higher abundance of the antimicrobial compound D-Limonene, the peel waste cannot be disposed of by biogas production. Therefore, after the extraction of D-Limonene from the peel wastes, it can be easily disposed of. The D-Limonene rich essential oil from the Citrus limetta risso (CLEO) was extracted and evaluated its radical quenching, bactericidal, and cytotoxic properties. The radical quenching properties were DPPH radical scavenging (11.35 ± 0.51 µg/mL) and ABTS scavenging (10.36 ± 0.55 µg/mL). There, we observed a dose-dependent antibacterial potential for the essential oil against pathogenic bacteria. Apart from that, the essential oil also inhibited the biofilm-forming properties of E. coli, P. aeruginosa, S. enterica, and S. aureus. Further, cytotoxicity was also exhibited against estrogen receptor-positive (MCF7) cells (IC₅₀: 47.31 ± 3.11 µg/mL) and a triple-negative (MDA-MB-237) cell (IC₅₀: 55.11 ± 4.62 µg/mL). Upon evaluation of the mechanism of action, the toxicity was mediated through an increased level of reactive radicals of oxygen and the subsequent release of cytochrome C, indicative of mitotoxicity. Hence, the D-Limonene rich essential oil of C. limetta is useful as a strong antibacterial and cytotoxic agent; the antioxidant properties exhibited also increase its utility value.     

Ground- and excited-state spectroscopic studies on [1-(4-methoxyphenyl)-3-(amino)-2,4-(dicyano)-9,10-tetrahydrophenanthrene]

The effects of polar and nonpolar solvents on both the ground and the excited-state properties of [1-(4-methoxyphenyl)-3-(amino)-2,4-(dicyano)-9,10-tetrahydrophenanthrene] is examined. Light absorption results in a population of a locally excited (LE) first singlet state (S₁,n^*) which shows sensitivity to the polarity of the surrounding solvent and hydrogen-bonding ability to the quencher 4-methylpyridine. Relaxation of this state leads to an intramolecular charge-transfer state (ICT) which leads to a large Stokes shift in polar solvents and an excited-state dipole moment of _e= 10D. The quenching of the fluorescence state by 4-methylpyridine studied inn-hexane and acetonitrile at room temperature is found to be efficient and a positive deviation from linearity was observed in the Stern-Volmer plots even at concentrations of 4-methylpyridine below 0.4M. This is explained as a result of the occurrence of both a dynamic and a static quenching mechanism. The static quenching constants (K _sv) along with those obtained by visible spectroscopy (K _GS) indicate that the ground-state complex is weak and relatively solvent dependent.     

XPS and material properties of raw and oxidized carbide-derived carbon and their application in antifreeze thermal fluids/nanofluids

Journal of Thermal Analysis and Calorimetry - In this study, the stability, thermal conductivity and viscosity of carbide-derived carbon antifreeze thermal fluids were explored. The study also...